eta 7246 90000 Electric Iron User Manual

: June 5, 2024
: ETA

Table of Contents

eta 7246 90000 Electric Iron
instructions For use
SAFETY PRECAUTIONS
DESCRIPTION OF THE APPLIANCE (fig. 1)
INSTRUCTIONS FOR USE
MAINTENANCE
ENVIRONMENT
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eta 7246 90000 Electric Iron

instructions For use

The handle of the iron is open and it is adapted for ironing with the right and the left hand. At the back side the handle forms a support that enables putting in the rest position. Handling while ironing is easier thanks to a swing-out power cable terminal. The control light signals automatic switching on and off by the thermostat which keeps the set temperature. Regulation of temperature of the ironing plate is continuous.

SAFETY PRECAUTIONS

Before the first use, read the instructions for use carefully, look at the picture and store the instructions for use for the future. Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
Check whether the data on the type label correspond with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according.
Never use the appliance if its power cord or plug is damaged,
if it does not work properly, if it fell down and was damaged and it is leaking. In this case take the appliance to a special service to check its safety and proper function.
Do not leave the iron plugged in power supply without supervision!
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
If the power cord of the charger is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.
The iron must be used and placed on stable surface.
Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
Do not put or take out the plug to or from a socket with wet hands and do not pull the power cord!
The product is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
The thermostat can never be used as a switch!
Never immerse the appliance into water (even its parts)!
Prevent loose hanging of the supply cable over the edge of the worktop where children could access it.
Do not place the iron in such a way that could represent harm (e.g. fire, burn and scalding).
When putting the iron on a stand, make sure that the surface, on which the stand is placed, is stable.
Never iron clothes on people.
When switching the iron for the first time, set the highest temperature and leave the iron on for at least 10 minutes without water. There can be light fume coming out of the iron which is cause by burning of the used lubricants and binding agents in the steam chamber.
Make sure that the power cord is always dry and it is not damaged.
Check the condition of the power cord of the appliance regularly.
Avoid free hanging of the power cord over edge of a worktop so that the power cord is accessible to children.
The power cord must not be damaged with sharp or hot objects, open fire and it must not be sunk into water.
Iron and its supply keep out of reach of children under 8 years (when is plugged in to power or cools down).
If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid standards.
Never use the appliance for any other purpose than for the intended purpose described in these instructions for use!
The producer is not responsible for damage caused by improper use of the appliance (e. g. burning, scalding, fire, clothes damage, scratching, ironing plate contamination) and its guarantee for the appliance does not apply to situations when the safety warnings above are not complied with.

DESCRIPTION OF THE APPLIANCE (fig. 1)

eta-7246-90000-Electric-Iron-
fig1

ironing board
control light
thermostat regulation wheel
storage board
space for power cord wind-up
power cord

INSTRUCTIONS FOR USE

Remove all the packing material and take out the iron with the accessories. Remove possible labels, protective foils or covers before the first use.

Ironing temperatures

Sort laundry and iron according to the instructions for treatment (e.g. manufacturer‘s recommendation – a label on clothes). If the instruction is missing and you know the material of the clothes, follow the table on picture 3. The table applies only to materials only, not to possible decorations, material treatment, etc.
Start to iron from the lowest temperatures to higher temperatures. If clothes consist of e.g. two and more materials or if it is treated by stringing, purls, relief, always iron according to the material with the lower temperature only. If you do not know the material, find the suitable place that is not visible when wearing and try suitable temperature for ironing at the place.
When ironing woollen fabrics, we recommend ironing on the back side of the fabric and you can iron virgin wool through additional cloth. Velvet and similar fabrics can be ironed in one direction (you will prevent creation of glossy areas).

eta-7246-90000-Electric-Iron-fig2

Ironing
Put the iron to the rest position (fig. 4).
Set the level against the mark on the container on the regulation wheel A3 according to the selected fabric (fig. 2). Plug the power cord A6 to a socket. When the control light A2 goes out, the proper temperature has been reached.

Warning
The regulation wheel A3 (fig. 2) is marked with international symbols that recommend the optimum ironing temperature and they are the same as marking on some types of laundry and textiles (fig. 3).
When the temperature is increased from the cold state or if the temperature is set from higher to lower, we recommend waiting for a while for stabilization of the ironing plate temperature.
Different thermal expansivity of the ironing board and cover may cause crackling in the iron, especially when heating up and cooling down. This is not to be considered a fault.

Storage
After finishing ironing let the iron cool down. Wind the power cord A6 on the back side of the cover A5 and put the iron to the rest position (fig.5). Put the appliance at a dry and dust free place, out of reach of children and incapacitated people.

MAINTENANCE

Unplug the iron from power supply by taking the fork of the power cord out of the socket! Do not use rough and aggressive detergents (e.g. sharp objects, scrapers, diluting agents or other solvents)! Wipe all dirt from the ironing board with a damp cloth or you can use a nonabrasive (liquid) cleaning agent. Wipe the whole iron with a damp cloth and dry. To avoid scratching the ironing board, protect it against contact with hard, namely metal objects.

ENVIRONMENT

If the dimensions allow, there are labels of materials used for production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authorities or at a collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations.
If the appliance is to be put out of operation for good, after disconnecting it from power supply we recommend cutting off the power cord and in this way it will not be possible to use the appliance again.

More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair!

TECHNICAL DATA

Voltage (V)specified on the type label
Input (W) specified on the type label
Weight (kg) cca 1,3

The product has received EC declaration of conformity according to Act as amended. The product matches the requirements of the below statutory order as amended.

Committee Regulation No. 2006/95/EC as amended, setting the technical requirements of the electrical appliance as low.
Committee Regulation No. 2004/108/EC as amended, setting the technical requirements of products in terms of their electromagnetic compatibility.

The manufacturer reserves the right for any insignificant deviations from the standard finished product which do not have any effect on the functioning of the product.
DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

PRODUCER: ETA a.s., Zelený pruh 95/97, 147 00 Praha 4-Bráník, Czech Republic.