Polibi CB-2PLGLS-13 Round Arm Linen Straight Sofas Living Room Set Instruction Manual
- June 5, 2024
- Polibi
Table of Contents
Polibi CB-2PLGLS-13 Round Arm Linen Straight Sofas Living Room Set
WARNING
- This product has been designed for seating one (1) average aduit. To prevent injury and damage to this unit, PROHIBIT jumping on it.
- This product is designed for home Use and not intended for commercial use.
- Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons.
- Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE
PARTS
INSTALLATION INSTRUCTIONS FOR 1 SEATER SOFA
- Step 1 : Carefully unpack parts/hardware from box and storage of seat body, place on a clean fat surface.
- Step 2: Place both arms as shown below, secure two legs into pre-drilled holes on the bottom of arms. Please avoid overtightening.
- Step 3: . Carefully lift and tum assembled arms onto its legs.Insert seat body metal plates to both arms as shown below. Ensure it is correctly in place.
- Step 4 : Insert backrest with ear piece metal plates to both arms as shown below. Ensuring is correctly in place.
- Step 5: Insert backrest metal plates to both arms as shown below. Ensuring it is correctly in place.
- Step 6: Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit.
INSTALLATION INSTRUCTIONS FOR 3 SEATER SOFA
WARNING
- This product has been designed for seating one (1) average aduit. To prevent injury and damage to this unit, PROHIBIT jumping on it.
- This product is designed for home Use and not intended for commercial use.
- Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons.
- Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE
PARTS
- Step 1 : Carefully unpack parts/hardware from box and storage of seat body, place on a clean fat surface.
- Step 2: Place both arms as shown below, secure two legs into pre-drilled holes on the bottom of arms. Please avoid overtightening.
- Step 3: . Carefully lift and tum assembled arms onto its legs.Insert seat body metal plates to both arms as shown below. Ensure it is correctivity in place.
- Step 4 : Insert backrest with ear piece metal plates to both arms as shown below. Ensuring is correctly in place.
- Step 5: Insert backrest metal plates to both arms as shown below. Ensuring it is correctly in place.
- Step 6: Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>