Polibi WF283526 76.37 Inch W Gray Modern King Size Solid Wood Platform Bed Instruction Manual

Polibi WF283526 76.37 Inch W Gray Modern King Size Solid Wood Platform

Bed

SAFETY WARNINGS

1. This bed is designed for use King Mattress 2050 mm Long and 1940 mm Wide and the total thickness is not exceeding 100mm.
2. The dimensions for length and width must be stated numerically and may additionally be stated in conventional terms, for example, twin size, twin extra long, and the like.
3. The maximum thickness of the mattress shall be stated
4. Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton. Do not remove the warning label from the bed.
5. Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls.
6. The surface of the mattress must be at least 5 in. (127 mm) below the upper edge of the guardrails.
7. Do not allow children under 6 years of age to use the upper bunk.
8. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage and that all connectors are tight.
9. Do not allow horseplay on or under the bed and prohibit jumping on the bed
10. Always use the ladder for entering and leaving the upper bunk.
11. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
12. The use of a night light may provide added safety precautions for a child using the upper bunk.
13. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and wall.
14. The use of water or sleep flotation mattresses is prohibited.
15. STRANGULATION HAZARD – Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for example, but not limited to, hook, belts and jump ropes.
16. Keep these instructions for future reference

ASSEMBLY INSTRUCTION

Part List(WF283526)-Hardware List

Hardware List-BED

ASSEMBLY HEADBOARD

1. Using Dowel 1 locate B2,88 Wood Bar with B4 Wood Bar and Panels B3(x2)
2. Using HW #2,#7 Connect A1,42 Legs with B2,B8,B5 Wood Bar
3. Using HW #3 Connect B1 Wood Bar with Frame(completed on step 1.2)
   -Look at detail view for more detail

STEP 1:

STEP2: ASSEMBLY FOOTBOARD

1. Using Dowel 1 locate B2,B8 Wood Bar with B7 Wood Bar and Panels B6(x2)
2. Using HW #2,#7 Connect A3,4 Legs with B2,88 Wood Bar
3. Using HW #3 Connect B1 Wood Bar with Frame(completed on step 2.2)
   -Look at the detail view for more detail

STEP 3.Following below illustration
Using hardware # 4,#5, and dowel #1 follow the detailed view to Assembly Headboard (Completed in step 1.3) with Footboard (completed in step 2.3) by Side Rail C(x2)
Look at the detail view for more detail

STEP 4.Following below Rustrabion

Using hardware #6 to Assembly Slats D1(k2) With Support Slats D3(2) and Center Legs D4(K4)
Look at the detail view for more detail

STEP 5.Foaming below lustration

Using hardware #3 to Assembly Frame (completed on step 3) With Frame (completed on step 4)
Look at the detail view for more detail

STEP 6. Following below illustration
-Screw 6 slats D2 with Side Rails C(x2) by using hardward #3.

If you have any questions about the product, please contact the email: Polibihd@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>