Intraco SP101 Moyoo Smokey Dome User Manual
- June 3, 2024
- intraco
Table of Contents
Intraco SP101 Moyoo Smokey Dome
Hello! This is your instruction manual, to help create the best possible experience with this cool product.
Safety Precautions
- Please follow closely the rules described in this manual to ensure your safety.
- Before using the speaker, we strongly recommend that you read this manual.
- Do not modify, repair or dismantle the Speaker
- Do not use any liquids to clean the products.
- Do not use the Speaker near water or in extreme temperatures.
Contents
Overview
- Power On/OFF
- Previous Track /Volume Down
- Play/ Pause
- Next Track/Volume Up
- RGB Light button
- RGB Light Panels
- Aux-In Port
- TF Card Slot
- Charging port
- Charging LED
Charging
Charging the Speaker
- Charge the speaker with a Micro-USB cable
- The charging LED will be in solid RED light while is charging RED light will turn off once the speaker is fully charged
- It takes approximately 4 hours to charge the speaker from 0% to 100%.
Pairing the Speaker
- Long press and hold the “Power On/OFF ” button 3S to turn on the speaker, and a voice prompt will say “Power on and the Speaker RGB light will flash.
- Connecting to a Bluetooth device:
- Go to your Bluetooth options and select the pairing name “Moyo Smokey Dome”.
- If pairing is successful, you will hear the voice prompt “Connected”, and the speaker RGB light will flash.
- Previously paired speakers have connected automatically when the speaker is switched ON.
- Disconnected Bluetooth will prompt a voice “Disconnected”, Speaker will shut off automatically after Bluetooth is disconnected for 20 mins.
- Long press the “Power On/OFF ” buttons 5S to turn off the speaker and you will hear a voice prompt “Power off”. and the speaker RGB light will turn off.
- If no connection is made to the speaker within 20 minutes, the speaker will automatically switch OFF.
- Calling
- Answer/End Call- Press the “Play/Pause” buttons once to answer an incoming call and once again to end the call.
- Reject a call: Press and hold the “Power On/OFF” buttons 1S to reject an incoming call.
- Playing Audio
- Press the “Play/Pause” buttons to play/pause your audio.
- Press the “-” button 1 time to go to the previous track and press the +” button to go to the next track.
- Long press the “button to decrease volume and Long press the “+ button to increase volume.
- When the speaker is in low power, you will hear a voice prompt” Low Battery”, then please charge your speaker
Speaker Technical Specification
Troubleshooting
Safety Precautions
WARNING
When using this product, basic precautions should always be followed,
including the following: Read the instructions fully before using the product.
- The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles.
- Do not overcharge your case. The unit may become hot under excessive use. Remove your case once it is fully charged. Never charge your case for more than 7 hours at a time.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating.
- Overloaded outputs above the rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the device. Take the device to a qualified technician if service or repair is required. Incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or temperatures above 212° F/100°C, which may cause an explosion.
- Have servicing performed by a qualified repair technician using only identical replacement parts.
- This will ensure that the safety of the product is maintained.
Read User Manual Online (PDF format)
Loading......