Selore S-Global SE0304 USB-C Multi-Functional HUB Instruction Manual
- June 5, 2024
- Selore S-Global
Table of Contents
Selore S-Global SE0304 USB-C Multi-Functional HUB
Product Introduction
This USB C 9 in 1 hub provides a stable connection and increases the productivity of your device by expanding the female USB C port to multiple possibilities of connectivity. Keep your laptop charging while still providing power to each external device attached. Extensive compatibility meets every need of almost all USB C devices and unlock ultimate convenience.
Structure Diagram
- 1. DP
- HDMI 2
- HDMI 1
- USB3.0
- PD3.0
- SD&TF Card Reader
- USB2.0
Features
-
1. DP:
4Kx2K 3840×2160 (work separately if source is DP1 .4 ) 4Kx2K 3840×2160 (work separately if source is DP1 .2 ) -
HDMI 2: 4Kx2K 30Hz / 3840×2160 max
-
HDMI 1:
4Kx2K 60Hz / 3840×2160 (work separately while source is DP1 .4 ) 4Kx2K 30Hz / 3840×2160 (work separately while source is DP1 .2 ) -
USB 3.0:
Data transfer speed up to SGbps, SV/0.9A@4.SW. -
PD3.0:
Support 1 DOW power in, but charging is limited with 87W for safety. -
SD/TF Card Slots:
Read: 25 – 30Mbps; Write: 20 – 25Mbps; affected by card’s quality. -
USB 2.0:
Data transfer speed up to 480Mbps, SV/O.SA@2.SW.
Support SST / MST
Comply with USB-C interface specification Built in conversion chip, plug and
play
Connection
Graphics Settings for window 10
Clone mode
Right click desktop >Graphics Settings > Display
Extended Desktop(NOT supported by APPLE)
Right click desktop >Graphics Settings >Display
Graphics Settings for Mac
Mirror Display
Apple logo>System Preferences> Displays 
Extend Display
Apple logo>System Preferences >Displays 
F&Q
Why is there no video output ?
- Pis make sure your USB-C devices support video output.
- Pis make sure the connection is good.
- Pis use a standard HDMI cable.
Why is there no audio output from HDMI?
- Pis make sure if there’s audio output on the Monitor.
- Pis set the external monitor as default audio output device.
Note
- The USB-C source devices (mobile/notebook/tablet PC) must support OTG.
- For Video output, USB-C source devices must support video output.
- 4Kx2K@60Hz video display, need your computer support DisplayPort (DP) v1 .4 (HBR3).
- Please update Mac OS of your MacBook to Catalina (10.15.1) or above for better compatibility.