Selore S-Global DK1102 DisplayLink Docking Station User Guide

: June 14, 2024
: Selore S-Global

Table of Contents

Selore S-Global DK1102 DisplayLink Docking Station
Product Information
Product Usage Instructions
USB-C Triple-Display Docking Station
Product information
Tech Specs
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Selore S-Global DK1102 DisplayLink Docking Station

Product Information

USB C 3.1 Gen2
USB A 3.1 Gen2
SD/MicroSD
Audio/Mic
USB A 3.0
USB A 2.0
LED
Lock
DisplayLink 2
DisplayLink 1
HDMI
USB 2.0
USB C Host
RJ45
DC power interface

Tech Specs

Expansion

Peripherals
- 1x USB A 3.1 Gen2 (10Gbps)
- 1x USB C 3.1 Gen2 (10Gbps)
- 2x USB A 3.0 (5Gbps)
- 2x USB A 2.0 for mouse or keyboard
Networking
- Gigabit Ethernet
SD/Micro SD
- SD v4.0 UHS-II, Read & Write: 250MB/s
- Micro SD v3.0 UHS-I, Read & Write: 104MB/s
Audio/Mic
- 3.5mm stereo headphone/headset jack, 16 Bit stereo ADC
External displays
- HDMI1 v2.1, 8K@30Hz with DSC when host is DP1.4 (DP Alt Mode, Plug & Play). Output 4K@30Hz when host is DP1.2.
- Display Link 1 & Display Link 2 (DP++ or HDMI, Support 4K@60Hz when Display Link driver installed)
- MST (Multi-Stream Transport) enabling multi-monitor support

Power
DC Power Adapter

Input: 100-240V, 50/60Hz, 2A Max.
Output: 20VDC, 6A

Size & Weight

Approximately 180x100x41mm, 520g

Product Usage Instructions

Using the USB C-C cable provided, connect the docking station to the laptop. The power source is necessary.
This Docking station is based on DisplayLink chip, and you need to install the DisplayLink Manager App to experience the full video function.

How to Install the DisplayLink Manager App
First of all, download the latest DisplayLink Manager App from https://www.synaptics.com/products/displaylink-graphics/downloads.
Choose the proper app according to your system.

EN – English

MacOS

Double click the DisplayLink Manager app and follow the setup to finish the installation.
When using the DisplayLink Manager app for the first time, it will ask for permission to record the screen.
To grant permission, follow these steps
- Click Apple System Preferences > Security & Privacy > Privacy > Screen Recording.
- Check the DisplayLink Manager.
- Enter your password or use fingerprint authentication to proceed.

Frequently Asked Questions

Q: What are the expansion ports available on the docking station?
A: The docking station has the following expansion ports

USB C 3.1 Gen2
USB A 3.1 Gen2
SD/MicroSD
Audio/Mic
USB A 3.0
USB A 2.0
LED
Lock
DisplayLink 2
DisplayLink 1
HDMI
USB 2.0
USB C Host
RJ45
DC power interface

Q: What is the power input and output of the DC Power Adapter?
A: The DC Power Adapter has an input of 100-240V, 50/60Hz, 2A Max, and an output of 20VDC, 6A.

Q: What are the supported external displays and their resolutions?
A: The docking station supports external displays through HDMI and Display Link. The HDMI1 port supports 8K@30Hz with DSC when the host is DP1.4. When the host is DP1.2, it can output 4K@30Hz. Display Link 1 and Display Link 2 support 4K@60Hz when the Display Link driver is installed. MST (Multi-Stream Transport) is enabled, allowing multi-monitor support.

USB-C Triple-Display Docking Station

Model : SEDK1102

Product information

USB C 3.1 Gen2
USB A 3.1 Gen2
SD/MicroSD
Audio/Mic
USB A 3.0
USB A 2.0
LED
Lock
Display Link 2
Display Link 1
HDMI
USB 2.0
USB C Host
RJ45
DC power interface

Tech Specs

How to Use

Using the USB C-C cable Provided to connect the docking station with laptop. The Power source is necessary.
This Docking station is based on DisplayLink chip, and you need to install the “DisplayLink Manager” App to experience the full video function.
Just plug and play.

How to Install the “DisplayLink Manager” App
First of all download the latest “DisplayLink Manager” App： https://www.synaptics.com/products/displaylink-graphics/downloads According to your system Choose the proper App.

MacOS

Double clicking the “DisplayLink Manager” app, then following the setup and finish the installation.
Using the “DisplayLink Manager” app for the first time and it will ask for the permission of “Screen Recording” .
You can follow those steps
- Clicking Apple System Preferences > Security & Privacy >Privacy > Screen Recording.
- Ticking the “DisplayLink Manager” .
- Inputting the Password or Use the fingerprint to enter.
After installing the app, the menu bar will show an icon . there are some quick-setting menus. You can set the app automatic startup.
Setting resolution and display mode
- System Preferences > Displays

Windows

Double clicking the “DisplayLink.exe” then following the setup and complete the installation.
After installing the driver, you can extend 2 monitors.
Start>Settings>System>Display

FAQ

Q1:HDMI 1 can`t be used.
The C port of your laptop must support DP alt mode, and HDMI1 can output video.
Q2:DisplayLink 1 &2 can`t be used.
Make sure that the “DisplayLink Manager” app is installed and running. In macOS, ensure that the app is given the permission of “Screen Recording” in the settings.
Q3:When connecting a wireless mouse or keyboard, it may not work properly?
Most wireless device like mouse, keyboard, and Bluetooth device work in the 2.4Ghz wireless band. USB 3.0 Port has potential for interference that can affect the device’ s performance. The most effective method is to add a USB 2.0 extension cable between the HUB and the receiver.

Please Rest Sure to Contact Our Support Team for Quick Solutions While Encountering Any Problems.

Email: support01@seloretech.com
Selore : https://seloreglobal.com/

HIGH-DEFINITION MULTIMEDIA INTERFACE
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.