Nekteck LMS-801 3D Kneading Massager with Heat Instruction Manual

Nekteck LMS-801 3D Kneading Massager with Heat

Operation Instructions

Read instructions before using

WARNING

FOR ADULT USE ONLY
Important: Any individual who may be pregnant, has a pacemaker, suffers from phlebitis and/or thrombosis, is at an increased risk of developing blood clots, or who has pins/screws/artificial joints or other medical devices implanted in his/her body should consult with physician before using a massaging device designed for home use.
If HEAT is too strong for your comfort please switch the heat off.

• Do not use on an infant .
• Do not use on sensitive skin.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE

IMPORTANT SAFETY INSTRUCTIONS
All of the safety and operating instructions should be read, adhered to and followed before the unit is operated.
When using an electrical appliance, basic precautions should always be followed, including the following:
DANGER To reduce the risk of electric shock:

1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
2. Do not reach for an appliance that has fallen into water. Unplug immediately.
3. Do not use while bathing or in a shower.
4. Do not place or store appliance where it can fall or into a tub or sink.
5. Do not place in or drop into water or other liquid.
6. Never use pins or other metallic fasteners with this appliance.
7. Carefully examine the covering before each use. Discard the appliance if the covering shows any signs of deterioration, such as checking, or cracking.
8. Keep dry. Do not operate in a wet or moist environment.

WARN I NG – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. An appliance should never be left unattended when plugged in. Unplug from the outlet when not in use, and before putting on or taking off parts.

2. Close supervision is necessary when this appliance is used by, on or near children, invalids, or disabled persons.

3. Use this appliance only for its intended use as described in this manual.
   Do not use attachments not recommended by the manufacturer.

4. Never operate this appliance if it has a damaged cord or plug. If it is not working properly, if it has been dropped or damaged, or dropped into water, DO NOT attempt to fix it yourself. Return the appliance to a service center for examination and repair.

5. Do not carry this appliance by its supply cord or use the cord as  handle.

6. Do not crush or fold this appliance when storing.

7. Keep the cord away from heated surfaces.

8. Never drop or insert any object into any opening.

9. Do not use outdoors. This appliance is intended for household and indoor use only.

10. To disconnect, set all controls to the off position, then remove plug from the outlet.

11. Do not overload the electrical outlet. Use only the power source  indicated.

12. To avoid the risk of electric shock, do not disassemble or attempt t repair the appliance. Incorrect repair can cause risk of electric shock or injury to persons when the unit is used.

13. Never remove the plug from the outlet by pulling the power cord.

14. Do Not use the product on head as head massager

15. Do not use 3D Massager MORE THAN 20 MINUTES

LOCATION OF PARTS AND CONTROLS

1. Main Unit
2. Shiatsu Nodes
3. Control Panel
4. Power on/off
5. Massage direction
6. Speed Control
7. Heat on/off
8. Adapter
9. Car Power Plug

USING THE MASSAGER

1. For IN DOOR USE, connect the power adaptor to the massager. Plug the adaptor into an outlet. (Sit comfortably in the chair then use massager)
2. For IN CAR USE, connect the car power plug to the massager. Plug the car power plug into the cigarette lighter in the car. (Do not use while you are driving)
3. Grip the POSITION I NG HANDLES and drape the MAIN UN IT around your neck with the MASSAGE NODES in the center of your back.
4. Press the POWER button on/off to turn on/off massage.
5. Press the HEAT button on/off to turn on/off heat.
6. Press DIRECTION button to change the direction of massage nodes, clockwise or counterclockwise.
7. Press speed control to change the speed

NOTE:

• The massage function will automatically shut off after 15 minutes.
• The Massage direction will automatically change everyone

PRODUCT CARE AND MAINTENANCE

1. Place the massager in a safe; cool and dry place when not in use.
2. After unplugging, wipe with a soft, damp cloth using non-abrasive cleaners.
3. Never submerge the unit in any liquid.
4. Keep away from all solvents and harsh detergents.
5. DO NOT attempt to repair this massager. There are no user-serviceable parts

SPECIFICATIONS

Rated Voltage ……………………………….. DC12V
Frequency …………………………………….. 50-60Hz
Power …………………………………………..

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>