Nekteck NK-FLM01 Intelligent LEG Beauty Machine User Manual

Nekteck NK-FLM01 Intelligent LEG Beauty Machine

Questions or Concerns?
Contact us at [email protected]

Thank You
Thank you for purchasing the Nekteck Smart Shiatsu Foot & Calf Massager with Heat. Nekteck is committed to providing our customers with high-quality products and great services. Should you have any questions or concerns about using your new product, feel free to contact our helpful customer support team at [email protected]. We hope you enjoy your new product! Explore more surprises at  www.nekteck.com The following pages of this manual have the instructions for all the functions and features of your Nekteck Smart Shiatsu Foot & Calf Massager with Heat. Please read the user’s manual carefully.

IMPORTANT SAFETY INSTRUCTIONS

Please read ALL instructions carefully before using the Foot & Calf Massager for the first time. We recommend that you keep this manual for future reference, even if you are familiar with the product. Improper use or unauthorized repairs are not permitted for safety reasons and will lead to loss of warranty. The basic safety precautions should always be followed. Failure to comply with this manual may cause fire, electric shock, and other serious injuries.
When using an electrical appliance, basic precautions should always be followed, including the following:

DANGER

• To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning.

WARNING

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be done by children without supervision.
• The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance.
• Use heated surfaces carefully as it may cause serious burns. Do not use over sensitive skin areas or where there’s poor blood circulation. The unattended use of heat by children or incapacitated persons may be dangerous.
• To reduce the risk of burns, fire, electric shock, or injury An appliance should never be left unattended when plugged in. Unplug from the outlet when not in use, and before putting on or taking off parts.
• Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury.
• Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
• Keep the cord away from heated surfaces.
• Never operate this appliance if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service centre for examination and repair.
• Do not carry this appliance by the power cord or use the cord as a handle.
• Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• To disconnect, turn all controls to the off position, then remove the plug from the outlet.
• Do not use the massager near loose clothing or jewellery.
• Keep long hair away from the massager while in use.

ELECTRIC SAFETY

• The appliance is only to be used with the power adapter that comes with the appliance.
• Do not use this appliance if it has been dropped or if any part of the appliance (including the massager cloth cover, power cord, or power adapter) has been damaged.
• Do not operate the appliance with wet hands or wet feet to reduce the risk of electric shock.
• Turn off and unplug this appliance before moving it.
• Unplug this appliance after use and before cleaning.
• Unplug IMMEDIATELY and DO NOT use the product if it has malfunctioned or has been damaged in any way. Inspect the product by a qualified person.

SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY

PACKAGE CONTENTS

• 1 x Nekteck Smart Shiatsu Foot & Calf Massager with Heat
• 1 x User Manual
• 1 x Power Adapter

SPECIFICATIONS

• Product Name:
  • Nekteck Smart Shiatsu Foot & Calf Massager with Heat
• Colour:
  • White
• Model Number:
  • NK-FLM0l
• Rated Voltage:
  • 12VDC 5.0A
• Rated Power:
  • 60W
• Dimensions:
  • 18.5 x 10.1 x 16.3in / 47 x 25.7 x 41.5cm
• Net Weight:
  • 11.9 lbs/ 5.4 kg
• Website:
  • www.nekteck.com
• Email:
  • [email protected]

KNOW YOUR SMART FOOT & CALF MASSAGER

Nekteck Shiatsu Foot & Calf Massager with Heat combines shiatsu massage with heat therapy to relieve tension and fatigue for your feet and calves. It features an adjustable bar and adjustable feet to position the massager at different angles to fit your needs. Enjoy a comfortable massage time with Nekteck Shiatsu Foot & Calf Massager with Heat.

PARTS & FEATURES

CONTROL PANEL

Note: The green light flashes slowly, and the green light flashes quickly when the l l V wifi connection is triggered.

BEFORE FIRST USE

USING THE MASSAGER

1. Remove the Smart Foot & Calf Massager and its accessories from the packaging box. Kindly check if all package contents are included.
2. Connect the DC power adapter to the massager [Figure 1.1] and plug it into an outlet.
3. If you feel mild pain during the initial use of the massager, we recommend you wear thick socks or put a towel under your feet to get moderate pressure and improve your massage experience.When you get used to the massage intensity, you can remove the towel or socks for a better massage experience.

NEKTECKAPP SETUP

Note: Due to the ongoing updates and improvements, the NEKTECK app may look slightly different than shown in the manual. In case you see a different setup, just follow the in-appinstructions.

NEKTECKAPP SETUP

DOWNLOAD THE NEKTECKAPP
To download the NEKTECK App, please scan the QR code or search for “NEKTECK” in Apple App Store®(iOS)or Google Play Store(Android).

Note:
For Android™ users, choose “Allow” to use Nekteck. It won’t be used to record personal, private information. The Nekteck App is continually being improved and may change over time. If there are any differences, follow the in-a pp instructions. Follow the instructions to finish setting up your Smart Foot & Calf Massager.

Note: You must create your own NEKTECK account to use third-party services and products. These will not work with a guest account. With a NEKTECK account, you can also allow your family and friends to control your Smart Foot & Calf Massag.

PAIRING WITH NEKTECKAPP

1. Turn on your smartphone’s Bluetooth® Wi-Fi®.
2. Touch the device icon and follow the in-a pp instructions to touch the button to complete the pairing.
3. Tap+ in the NEKTECK App and select your smart foot massager machine from the Product listat the first connection. Once paired successfully, it will remain in “Searching for Devices”. You can tap it directly the next time you use it.
4. Press and hold power button “ ” for Ss to turn on Wi-Fi of the machine. And then the Wi-Fi indicator will blink and wait for pairing. The connection status will be displayed on the App.
5. If it discovered the smart foot massager machine. Please tap “Add Device” and set up Wi-Fi.

Note: Make sure your router is turned on and connectable. The Wi-Fi® password is entered correctly. Make sure your Wi-Fi® signal can cover the device. Only use 2.4G network connection.

ATTENTION!
If you’re having trouble setting it up or pairing it, please follow the steps below to troubleshoot.

TROUBLESHOOTING

SOLUTIONS

1. Make sure the Wi-Fi® indicator is blinking.
2. Make sure your phone’s Bluetooth® is turned on.
3. Please check that the foot massager machine device is plugged in and powered on, then click “Try Again” and follow steps 4 and 5 of PAIRING WITH NEKTECKAPP.
4. Turn this device off and on again by unplugging the device and reinserting it.

WHY DOES IT SHOW THIS REMINDER?

1. You or your family have used another Nekteck account to connect this foot massager machine with the NEKTECK App before.
2. Repeat connecting the same device on this app.

SOLUTION
Please click “Reset My Device” and then you can connect to other new devices. However, it will lose all your saving settings on this device.(You can also use this method to reset your device upon demand)lf you don’t want to reset your device, please click “Exit SetUp” and it will keep all your saved settings.

PAIRING WITH THE DEVICE

1. It takes time for the first time to pair with the NEKTECK App. Please wait for the connection, and you can visit the foot massager machine operation interface after the connection is successful.
   Note: The Wi-Fi indicator will keep on once connected successfully.

2. This device needs to be set up above these steps only for the first time, just click up the device on “My device” at the next time of use, and it will automatically connect.

Note: If you complete the connection and unplug the device, you can see the device status is off on your app. Please wait for 5 – 10 seconds after connecting the plug to the power source again to let the device automatically connect to the App.(The Wi-Fi indicator will blink for 5 -10 seconds and then change to keep on once automatically connected.)

Bluetooth® Connection Failed
If the Bluetooth® connection fails, please keep your phone close to the device and reconnect again.

Wi-Fi®Connection Failed
If the device network configuration fails, please make sure the Wi-Fi® password is correct, or try to switch Wi-Fi® to connect.

Device Connection Failed
Press and hold the power button( ) for 5 seconds until the Wi-Fi® indicator starts blinking, and reconnects again.

APP FUNCTIONS

1. Remote Control
   All basic functions are available on the app.

2. Custom Timer
   It can be timed on the App, not limited to 15 or 30 minutes of the machine itself.

3. Custom Mode Setting
   Save your favorite settings, and you can select them for the next use.

4. Memory Function
   The device will remember the current working mode status, It will become the default setting when restarting the machine the next time.

OPERATING INTRODUCTIONS

MASSAGE OPERATION

STEP 1: TURN ON THE MASSAGER
Press the ON/OFF Button” ” on the controller or the control panel. The massager will beep once and start in the default massage mode (see the chart below). Default Settings for Each Mode and Timer

STEP 2: ADJUST THE MASSAGE MODES AND INTENSITY LEVELS TO FIT YOUR NEEDS (OPTIONAL)

Reference Chart of Modes and Intensity Levels.

Press the Mode Buttons “ “to change the intensity levels or turn on/off the corresponding mode. With each press of the button, the intensity level will change once, cycling through the sequence shown in the chart above.

For example

Press the Rolling Button” “once, the intensity will change to the next level, cycling through the following sequence: Low Intensity (Default Setting with Green Indicator)➔ High Intensity (Red Indicator)➔ OFF (Light Off).

Note: Each of the 4 massage modes can be adjusted and run individually.

Reference Chart of Indicator Light Color and Its Corresponding Intensity Level or Timer.

Note: Medium Intensity is available for the Air Compression Mode ONLY.

STEP 3: SET THE MASSAGE DURATION (OPTIONAL)
By default, this massager will automatically shut off after a 15-minute massage session. Press the Timer Button to switch the timer between 15 and 30 mins. 15 Mins (Default Green indicator) 30 Mins (Red indicator)

Note
If you want to have a 30-minute massage session instead of the default 15-minute session, it’s highly recommended to set the time in the beginning. If you want to change the time during the operation, please follow the chart below.

CAUTIONS

• After each massage session, please rest for 30 minutes before starting the next massage session.
• Each Individual should NOT use the massager for over 45 minutes a day.
• It is highly recommended to start the operation from the lowest intensity at the beginning of each use.
• It is highly recommended to wear socks while using this massager.
• If you want to stop the massage session, press the ON/OFF button at any time you like.

CLEANING AND MAINTENANCE

TO CLEAN

• Unplug the massager and allow it to cool down before cleaning. The fabric cover can be removed for cleaning.
• Clean the base only with a soft, very slightly damp sponge or cloth.
• Do not allow water or any other liquids to get into the massager.
• Do not immerse the product in any liquid to clean.
• Do not use abrasive cleaners, brushes, or strong chemicals to clean the product, for it might cause damage to the product.

TO STORE

• Place the massager in its package box or a safe, dry, and cool place.
• Avoid sharp edges and objects to protect the product from scratching or damage.
• Do not wrap the power cord around the product to avoid breakage.
• Keep out of high temperatures.

TROUBLESHOOTING

Troubleshoot your problem by using the chart below. If the Shiatsu Foot & Calf Massager still does not operate correctly, it may be defective. Please contact our customer support for assistance. DO NOT try to repair it by yourself. Otherwise, there is a risk of electric shock.

CUSTOMER SUPPORT If you believe you received a defective unit, please contact our CustomerService Team at [email protected] for a solution.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 5 cm between the radiator and your body. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

LIMITED WARRANTY

Nekteck provides all of our customers with a warranty of 12 Months from the date of purchase. Please contact our customer service team at [email protected] if you have any questions.

• Order ID:——
• Date of Purchase:——

For your own reference, we recommend that you record your order number and date of purchase.

DISCLAIMER

Nekteck and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual. Some countries or states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you.

PROPER USE OF NEKTECK’S PRODUCTS INVOLVES SERIOUS RISKS INCLUDING INJURY AND DISABILITY. YOU UNDERSTAND THAT BY KEEPING, USING, OR ALLOWING USE OF NEKTECK’S PRODUCTS, YOU AGREE TO THE FOLLOWING:

1. NEKT ECK ACCEPTS NO RESPONSIBILITY FOR ANY INJURY THAT MIGHT OCCUR WHILE USING NEKTECK’S PRODUCTS.
2. USE LIMITATION. YOU MAY NOT MODIFY AND REPRODUCE NEKTECK’S PRODUCTS. YOU SHALL CAREFULLY INSPECT NEKTECK’S PRODUCTS BEFORE EACH USE TO ENSURE IT HAS NOT BEEN DAMAGED AND IS FULLY FUNCTIONAL.

CUSTOMER SERVICE
Feel free to contact our friendly Customer Support Team if you have any questions or concerns regarding your new product. Your satisfaction is our priority.

Email: [email protected] We will reply to your message within 24 hours! Please include your Order ID in your email when you are contacting Customer Support for faster solutions.

QUESTIONS & CONCERNS?

• Contact us at [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>