AIPER S1N1PRO Cordless Robotic Pool Cleaner User Manual
- June 1, 2024
- AIPER
Table of Contents
AIPER S1N1PRO Cordless Robotic Pool Cleaner
Replacing the roller brush belt
a. Find the side that looks different from the other roller brush belts, and pull down the silicone buckles that are stuck in the fixed slot.
Illustration: Close-up view of a roller brush belt highlighting the silicone buckles.
b. After all the silicone buckles are pulled out, replace the roller brush belt with a new one. Align the silicone buckles with the fixed slot and pull them outward. They can be fixed after passing through the slot.Illustration: Hands replacing the roller brush belt and aligning silicone buckles with the slot.
Cleaning the drain
a. Lift the top shell.Illustration: Hand lifting the top shell of the device to reveal the interior.
b. Remove the screws and drain cover.
Illustration 1: Hand unscrewing screws from the bottom of the device.Illustration 2: Hand removing the drain cover from the device.
c. Remove any objects entangled in the drains fan blades, and then re-install the drain cover and screws.
Illustration: Hand removing debris from the fan blades and re-installing the drain cover.
Storage
Winter Tips: How to store and secure your Aiper devices
How should I store my Aiper device during the off-season?
In your pool’s off-season, such as winter months or long vacations when your Aiper device won’t be used, there are a few steps to take to protect your device and keep it in the best condition possible:
- Power off your device and disconnect it from the charger.
- Clean the device of any residual dirt, including the top & bottom shell, wheels, roller brushes, and charging port.
- Using a paper towel or soft cloth, wipe dry your device.
- Box and store your device in a cool, well-ventilated area.
- Charge your device every TWO months to 40%-60% battery capacity to maintain the battery health of your device.
When you’re ready to use your Aiper device in your pool, fully charge the device before using it in your pool, and never charge your device in direct sunlight.
LED Indicator Lights
| Light Status | Device Status | Description |
|---|---|---|
| Pulsing Light | Charging | The LED indicator color changes with the battery |
level. The indicator light slowly pulses during charging and produces a solid
glow turns when fully charged.
Blue light always on: 100%| Blue: > 51%
| Yellow: 50%-16%
| Red: < 15%
Solid Light| Operating| The LED indicator color changes with the battery
level.
Blue: > 51%| Yellow: 50%-16%
| Red: < 15%
Red Light Flashes Rapidly| Device Malfunction| Filter screen blockage, motor
stalling, electrical leakage, etc.
Packing List
| NO. | Name | Model | QTY(pc) |
|---|---|---|---|
| 1 | Cleaner | Aiper Scuba N1 Pro | 1 |
| 2 | DC Charger | / | 1 |
| 3 | Retrieval Hook | / | 1 |
| 4 | User Manual | / | 1 |
| 5 | Extra PVC Brushes | / | 2 |
| 6 | Extra 3μm Ultra-fine Filter | / | 2 |
Warranty
This product has passed quality control and safety test conducted by our technicians.
- This product comes with a 24-month warranty that covers your item’s battery and motor from the date of purchase.
- This warranty is voided if the product has been altered, misused, or has been repaired by unauthorized persons.
- This warranty extends only to manufacturing defects and does not cover damage resulting from the mishandling of the product by the owner.
- The order number or record of purchase must be presented at the request of any repair claim during the warranty period.
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Specifications
| Section | Details |
|---|---|
| Maintenance | Instructions for replacing tracks, roller brush belt, and |
cleaning the drain.
Storage| Guidelines for storing the device during the off-season.
LED Indicator Lights| Explanation of LED light status and device status.
Packing List| List of items included with the Aiper Scuba N1 Pro.
Warranty| 24-month warranty details and conditions.
FAQ
How do I replace the tracks on my Aiper device? You can replace the tracks by following the illustrated step-by-step instructions in section 8.1 of the manual. What should I do if my device’s LED indicator light is flashing red rapidly? If the LED indicator flashes red rapidly, it may indicate a device malfunction such as filter screen blockage or motor stalling. Refer to the LED Indicator Lights section for more details. How often should I charge my device during the off-season? Charge your device every two months to 40%-60% battery capacity to maintain the battery health. What is included in the packing list of the Aiper Scuba N1 Pro? The packing list includes the cleaner, DC charger, retrieval hook, user manual, extra PVC brushes, and extra ultra-fine filters. What does the warranty cover? The warranty covers the battery and motor for 24 months from the date of purchase and is subject to certain conditions.
Maintenance
Replacing the tracks.
- a. Remove the side cover plate from the device.
- b. Remove the screws and the guide sleeves from the wheels.
- c. Remove the screws and the guide sleeves from the wheels.
- d. Remove the screws and the guide sleeves from the wheels, then install the rear wheels and tracks together back onto the shaft sleeves.
- e. Re-install the guide sleeves by aligning their D-shaped openings with that of the shaft sleeves.
- f. Tighten the screws and re-install the side cover plate.
Replacing the roller brush belt
- a. Find the side that looks different from the other roller brush belts, and pull down the silicone buckles that are stuck in the fixed slot.
- b. After all the silicone buckles are pulled out, replace the roller brush belt with a new one. Align the silicone buckles with the fixed slot and pull them outward. They can be fixed after passing through the slot.
Cleaning the drain.
- a. Lift the top shell.
- b. Remove the screws and drain cover.
- c. Remove any objects entangled in the drains fan blades, and then re-install the drain cover and screws.
Storage
Winter Tips: How to store and secure your Aiper devices
How should I store my Aiper device during the off-season?
In your pool’s off-season, such as winter months or long vacations when your Aiper device won’t be used, there are a few steps to take to protect your device and keep it in the best condition possible.
- Power off your device and disconnect it from the charger.
- Clean the device of any residual dirt, including the top & bottom shell, wheels, roller brushes, and charging port.
- Using a paper towel or soft cloth, wipe dry your device.
- Box and store your device in a cool, well-ventilated area.
- Charge your device every TWO months to 40%-60% battery capacity to maintain the battery health of your device.
When you’re ready to use your Aiper device in your pool, fully charge the device before using it in your pool, and never charge your device in direct sunlight.
LED Indicator Lights
Packing List
| NO. | Name | Model | QTY(pc) |
|---|---|---|---|
| 1 | Cleaner | Aiper Scuba N1 Pro | 1 |
| 2 | DC Charger | I | 1 |
| 3 | Retrieval Hook | I | 1 |
| 4 | User Manual | I | 1 |
| 5 | Extra PVC Brushes | I | 2 |
| 6 | Extra 3µm Ultra-fine Filter | I | 2 |
Warranty
This product has passed quality control and safety test conducted by our technicians.
- This product comes with a 24-month warranty that covers your item’s battery and motor from the date of purchase.
- This warranty is voided if the product has been altered, misused, or has been repaired by unauthorized persons.
- This warranty extends only to manufacturing defects and does not cover damage resulting from the mishandling of the product by the owner.
- The order number or record of purchase must be presented at the request of any repair claim during the warranty period.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>