Nekteck FE-7208 Air Compression Foot Calf Thigh Massager User Manual

User Manual

Air Compression Leg Massager

Model: FE-7208

Questions or Concerns?
Contact us at [email protected]

Thank You

Thank you for purchasing Nekteck Air Compression Leg Massager. Nekteck is committed to providing our customers with high-quality products and great services. Should you have any questions or concerns about using your new product, feel free to contact our helpful customer support team at [email protected].

We hope you enjoy your new product!

Explore more surprises at
www.nekteck.com

The following pages of this manual have the instructions for all the functions and features of your Air Compression Leg Massager. Please read the user’s manual carefully.

| IMPORTANT SAFETY PRECAUTIONS

PRECAUTIONS TO ENSURE SAFE AND RELIABLE OPERATION:

• Do not insert any foreign objects into the openings.
• Do not attempt to disassemble the unit.
• Do not crumple or crush the massager by any means.
• Do not place the unit in direct sunlight nor store in dusty places or with high humidity.
• To avoid any possibility of accidental strangulation, keep this unit away from children and
• Do not drape tubing around your neck.
• Ensure that children do not play the unit unsupervised; some parts may be swallowed.
• Do not use the device near strong electrical or electromagnetic fields generated by cell phones or other devices, they may cause interference or become interference source to the device.
• Any modification to the unit shall not be allowed.
• The product (air compression leg massager) is for adult use only.

CONTRAINDICATIONS:

This air compression leg massager is not intended for use if you have any of the following medical conditions. We advise you to consult with a physician first to confirm if the product is clinically safe for you to use.

• Presumptive evidence of congestive heart failure where increase in blood returned to the heart could be detrimental.
• Pre-existing deep vein thrombosis (DVT) or blood clots.
• Existing hemorrhagic disease or coagulation problems.
• Thrombophlebitis
• Pulmonary embolism

This product should not be utilized by individuals with edema, ischemic vascular disease, or severe peripheral neuropathy.

SAFETY PRECAUTION:

• Do not plug the unit to a power source that’s beyond its voltage requirement.

• Do not attempt to repair or dismantle the product by yourself or a third party. This will void the warranty.

• Stop using the product immediately if you feel uncomfortable or any abnormalities occur.

• Do not use this product in a high-temperature environment.

• Do not place the unit in a place where it may be in contact with flammable items, explosive items, or chemicals.

• Do not touch the unit with any sharp object or risk damage.
  Do not use this product if any of the below apply to you: -Skin is infected, swollen, burnt or otherwise damaged. The product should be used in healthy skin.

• Do not use the product in a damp place or where it may get wet. If the unit is wet, do not use it.

PLEASE DO NOT USETHE PRODUCT WHEN YOU HAVE THE FOLLOWING MEDICAL

CONDITIONS:

• You have a pacemaker or any other medical implant
• You are suffering from heart disease.
• You are suffering from diabetes.
• Your bones are fragile or injured.
• You are suffering from cancer.
• You are receiving treatment or your blood pressure is not normal.
• You are suffering from osteoporosis.
• You are currently pregnant or having menstruation.
• Children or adolescents who are developing physically.

The air pressure hose connected to each boot cannot be pulled out. Please do not try to remove these from the boot.

SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

| GETTING TO KNOW YOUR AIR COMPRESSION LEG MASSAGER

Air compression leg massager, is intended for the temporary relief of minor muscle aches and pains and for the temporary increase in circulation to the treated foot/calf and thigh in people who are in good health. The air compression leg massager simulates kneading and stroking of tissues by using air-inflatable boots.

1. PRODUCT DIAGRAM

(A) Air Compression Boots(Left / Right)
(B) Velcro Strap
(C) Remote Control
(D) Air Pressure Hoses(Left / Right)
(E) LCD Screen
(F) Control Panel
(G) Port for Air Pressure Hose Connector
(H) Adapter

2. PACKAGE CONTENTS

• Air Compression Leg Massager X1
• Adapter X1
• User Manual X1
• Controller X1
• Portable Bag X1
• Warranty Card X1

3. CONTROL PANEL

1. Vibrate Button
2. Heat Button
3. Intensity Button
4. Mode Button
5. Power Button

POWER BUTTON

| Press this button for 2 seconds to turn on the device. The default setting will be: Auto mode/mid intensities/high heat/vibration working.
Press it again for 2 seconds to turn off the device.

MODE BUTTON

| Press mode button to switch mode.
The sequence is as follows:[AUTO] :leg and foot pressure massage

[LEG] :Only leg pressure massage

[FOOT] :Only foot pressure massage

[PINCH] :leg and foot pressure massage

[PRESS] :leg and foot pressure massage

[RELAX ] :leg and foot pressure massage

INTENSITY BUTTON

| Massage Strength Intensity MIN/MID/MAX.

HEAT BUTTON

| Heat Level: LOW/HIGH/OFF.

VIBRATE BUTTON

| Refer to vibration working.
Blue light with model 1 vibration.
Green light with model 2 vibration.
Red light with model 3 vibration.

REMARK: This product has a status memory function: the device will remember the current working mode status (air pressure, heating, vibration mode and gear) after starting the machine. It will become the default setting when restarting the machine the next time.

Note:
When using the device, please make sure that you are comfortably sitting or lying down to avoid risk of falling. This is the best way to enjoy the massage.

4. SPECIFICATIONS

Atmospheric pressure 70kPa- 106kPa
Humidity: 15% to 90%RH
Storage Environment:| Temperature: -13°F to 158°F(-25°C~70°C)
Atmospheric pressure 70kPa- 106kPa
Humidity ≤93% RH

| BEFORE FIRST USE

USING THE MASSAGER

1. Remove the Air Compression Leg Massager and its accessories from the packaging box. Double-check if all items and accessories are complete.
2. Check that the fabric is in good condition.
3. Sit in your most comfortable posture, place your feet and legs into the massager and press the control to start the Air Compression massage. Adjust the levels to the most comfortable one.
4. Make sure to check that the unit is working properly after powering on, then select the massage mode and intensity that you prefer. Please do this especially if the product has not been used for a long time.
5. There may be signs of use from the boot on the skin. If you are worried about marks from use, please wear stockings or pants before utilizing the massager. Please note that the device may leave marks of use on the feet, calves, knees and thighs, which may not immediately fade.

Note:
Do not use it on clothes and trousers with zippers or metal objects. It may damage the product.

| OPERATING INSTRUCTIONS

OPERATING PRINCIPLE

Air Compression leg massager consists of an air pump, two solenoid valves, and air compression boots working together as one unit. The air pump is connected to air compression boots via air hoses; each boot has 3 compression chambers. By inflating and deflating the air chambers through the control of working and/or idle of air pump and solenoid valves at a regular pace and different timing, it is to simulate the kneading, stroking foot/calf and thigh. Software controls the timing and the working and/or idle of air pump and solenoid valves, cycling airflow into and out of the boots to compress body.

HOW TO CONNECT THE CONTROLLER WITH AIR HOSE

As shown above, insert the symbols ” R ” and ” L ” on the hose into the corresponding ” L ” and ” L” holes in the controller respectively.

Note: Make sure that the written symbols on the hose are facing outside so that the “L” is facing up, and the “R” is facing down. Air pressure cannot be produced if the device is not in this configuration.

WEARING ORDER

1. Put the foot into the massager, start from the foot, fix the foot first, and then stick the velcro to the calf-thigh-knee in sequence, as shown Below.
There are two velcros on the calf.

2. There are 2 velcros on the thigh, which can be adjusted according to the individual’ s leg circumference.
3. It is easier to attach the knee velcro strap following adjusting the velcro straps on the foot, calf, and thigh.

Note:

• It is easier to install if you sit on a chair.
• When installing, please be careful not to let velcro stick to the clothes or stockings, especially the sweater, so as not to damage your clothes.
• After ensuring you have donned the boots and the velcro straps are secured to the boots, turn on the device and enjoy the massage.

| FAQS

Q1. Under what circumstances should I not use it?****

A1: During pregnancy or immediately after giving birth. Patients with severe blood circulation disorders are not advisable to use the product under the above circumstances. In addition, if you have a fever or any abnormality in your body, be sure to consult a doctor before use.

Q2. How many times can I use it in a day?****

A2: The massager will automatically shut down after 30 minutes of continuous use. We do not recommend using a massager for more than 40 minutes in a day. Prolonged use will over-stimulate muscles and nerves and may have adverse effects.

Q3. Can it be used for other parts than feet, calves, knees and thighs?****

A3: It is only for feet, calves, knees and thighs. Use in other parts may cause accident or injury.

Q4. What size feet, calves and thighs of users are suitable for?****

A4: 1. Foot width : about 12 cm to 16 cm. 2. Calf diameter: about 16.5 cm to 24 cm

Q5. The strength is too strong or too weak.****

A5: The elasticity can be adjusted by the velcro wrap. When the velcro is loosely wound, the overall use strength and pressure will be relatively weakened. Otherwise, the overall intensity and pressure will be relatively strengthened.

Q6. The air in the massager hose does not exhaust.****

A6: If a lot of air remains in the airbag, it may take some time to exhaust. Unplug the hose and wait for a while for the air to escape naturally.

Q7. I can hear some weird sounds on the massager. Is it abnormal?****

A7:
(1) Velcro sound is crisp
This is the sound of the Velcro slightly opening on the massager (that is the sound of the Velcro being pulled when the air enters the airbag).
(2) Buzzing sound
This is the sound produced by the mode effect.
These are normal which is caused by the product design of the massager.

Note:

• Expected service life: Approximately two years at 2 uses per day.
• Do not service or perform maintenance on the device while it is in use.
  Maintenance should only be performed by service personnel. Service and maintenance of your device may require repair, parts, and technical support. As noted in the beginning of the user manual, users should contact the manufacturer or the representative of the manufacturer for using or maintaining the product.

| CARE & MAINTENANCE

SECURITY AND MAINTENANCE

Never use thinner, benzine or alcohol (which may cause malfunction, parts broken or discoloration, etc) to clean Avoid dropping, slamming, or throwing the massager Do not expose the unit directly under the sunlight.

WET THE CLOTH AND WRING IT OUT

If you are worried about dust, please use a neutral detergent suitable to be used in the kitchen, dilute to 5% with warm or clean water, and then damp a soft cloth to clean it.

CLEAN

Make sure to turn off the power and unplug the hose. Wipe the inside and outside of the leg massager and remember not to wipe with large force.

Note:

• If rubbish or hair is caught in the velcro, remove it with a toothpick etc.
• Do not insert foreign objects into the outlet of the hose plug.
• A pair of boots is recommended for an exclusive use of one person only.

STORAGE

Stick the velcro on the feet, ankles and calves to the corresponding positions at 1,2,3, and fold the foot part inward 4.
Fold the ankle and calf 5, round the connecting hose and then fix it with a belt fastener 6,7.

SAFEKEEPING

Put the unit in a cool, dry place and avoid direct sunlight or high- temperature places.

• Keep out of the reach of children.
• Do not store other objects on the surface of the controller or massager to avoid damaging the device’s surface and to avoid discoloration of the product.

| TROUBLESHOOTING

Before requesting repairs, please confirm the following contents, and if errors persist after inspection, please contact your dealer. CONDITIONS| TROUBLESHOOTING
---|---
The unit does not turn on.| Check if the AC adapter is connected.
Stop working halfway.|

1. Check if it is out of power
2. Check whether the hose plug is loose or the connecting hose is broken

Air does not enter.| Whether the connecting hose is broken.
Strength intensity is too weak.|

1. Check if the cables or accessories are loose. Make sure to tightly wind the velcro properly.
2. If you are wearing thick stockings or pants, this may weakened the strength intensity of the massager.

Strength intensity is too strong Stress intensity is too strong.|

1. Make sure that the attachments are not too tight.
2. Try to adjust the velcro to the most comfortable setup.

Air does not de-compress.| Remove the accessory and pull out the hose plug to re-install.

| FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate this equipment.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

| WARRANTY INFORMATION

TERMS & POLICY

Nekteck Corporation (“Nekteck”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 1 year from the date of original purchase. Nekteck agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase.
There is no other express warranty. This warranty does not apply:

If the product has been modified from its original condition;

• If the product has not been used in accordance with directions and instructions in the user manual;
• To damages or defects caused by accident, abuse, misuse or improper or inadequate maintenance;
• To damages or defects caused by service or repair of the product performed by an unauthorized service provider or by anyone other than Nekteck;
• To damages or defects occurring during commercial use, rental use, or any use for which the product is not intended;
• To damages or defects exceeding the cost of the product.

Nekteck will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty.

This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty.

This warranty does not extend to products purchased from unauthorized sellers. Nekteck’ 5 warranty extends only to products purchased from authorized sellers that are subject to Nekteck’ s quality controls and have agreed to follow its quality controls.

All implied warranties are limited to the period of this limited warranty.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

If you discover that your product is defective within the specified warranty period, please contact Customer Support via [email protected]. DO NOT dispose of your product before contacting us. Once our Customer Support Team has approved your request, please return the product with a copy of the invoice and order ID.

Every Nekteck product automatically includes a 1-year warranty. To make the customer support process quick and easy, register your product online at www.Nekteck.com.

CORRECT DISPOSAL OF THIS PRODUCT(WASTE ELECTRICAL & ELECTRONIC

EQUIPMENT)

This marking shown on the product indicates that it should not be disposed with other household waste at the end of its life.

To prevent potential harm to the environment or to human health, please separate this product from other types of wastes and recycle it responsibly.

When disposing this type of product, contact the retailer where product was purchased or contact your local government office for details regarding how this item can be disposed in an environmentally safe recycling center.

Business users should contact their supplier and check the terms and conditions of the purchasing agreement. This product should not be mixed with other commercial wastes for disposal. This product is free of hazardous materials.

| CUSTOMER SERVICE

Feel free to contact our friendly Customer Support Team if you have any questions or concerns regarding your new product. Your satisfaction is our priority.

Email:[email protected]
We will reply to your message within 24 hours!

Please include your Order ID in your email when you are contacting Customer Support for faster solutions.

QUESTIONS & CONCERNS?
Contact us at [email protected]

Ver: 221222

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>