zigbee QQGWZW-01 Gateway Device Instruction Manual
- June 5, 2024
- zigbee
Table of Contents
zigbee QQGWZW-01 Gateway Device
Product Description
The zigbee gateway is a control center for smart home devices. It communicates
with the cloud and mobile phones through Wi-Fi. After users add Zigbee devices
to the gateway, they can use App to view and remote control these devices. In
addition, it can achieve many intelligent applications, such as third-party
control, group control, scene linkage and so on. 
Indicator Light Description
Indicator Light|
Product Status
| Indicator Light Status
---|---|---
Red Indicator Light
（Wi-Fi）
|
Connected
| The indicator light is constant on.
Waiting for the Connection| The indicator light flashes rapidly.
Wi-Fi information has been con- figured, but cannot be connected| The
indicator light is off.
Blue Indicator Light (Zigbee)
| Allows sub-devices to access
the network
| The indicator light
flashes rapidly.
Nonactivated
| The indicator light is
constant on.
Activated
| The indicator light is off.
Installation and Distribution Network
- Please use the 5V 1A adapter and power cord in the box to power on the gateway.
- After the power is turned on, wait for the red indicator light of the gateway to change from steady on to flash rapidly, then you can connect it to the Larkkey App.
- Before adding a gateway, ensure that the mobile phone is connected to a 2.4GHz Wi-Fi network.
- Scan the QR code or search for “Larkkey” in the App store to download and install the Larkkey App.
Scan the QR code to download the Larkkey App *App is subject to the actual
release version
Open the Larkkey App and click “+” in the upper right corner of the home page
to automatically discover the wireless gateway(Zigbee) to be added Click “Add”
and add devices as prompted by App.
Use Gateway
After the gateway is successfully added, please refer to the manual of the smart device that can be connected to the Larkkey App to add the corresponding sub-device. The added sub-devices can be viewed on the gateway device page, and the automation and Tap-to-Run can be configured in the “smart” page in the Larkkey App, which can realize rich automation control.
Tips:
- If the connection fails, you can press and hold the gateway reset button for 5 seconds until the blue light turns on. Then, you can add it again after the red light flashes.
- For smooth connection, keep the mobile phone as close to the gateway as possible and ensure that the mobile phone and the gateway are on the same Wi-Fi network.
- If the gateway is not automatically discovered, you can select the gateway control -> wireless gateway(Zigbee) on the “Manually add” page and add the gateway as prompted.
Product Specifications
| Item Number | QQGWZW-01 |
|---|---|
| Power Input |
5V __ 1A
Working Temperature| -10℃～+50℃
Working Humidity| 10%-90%RH（No Condensation）
Product Size| 67.5mm67.5mm15.9mm
Product Net Weight| 33g
Wireless Protocol| 2.4GHz Wi-Fi，Zigbee3.0
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This product has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This product generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body
CE Notice
CE Products with the CE marking comply with the Radio Equipment Directive
(2014/53/EU), the Electromagnetic Compatibility Directive (2014/30/EU), the
Low Voltage Directive (2014/35/EU) – issued by the Commission of the European.
Compliance with these directives implies conformity to the following European
Standards：
EN300328 V2.1.1
EN301489-1/-17 V2.1.1
EN62368-1:2014+A11:2017
EN55032:2015+AC:2016(ClassB);
EN55035:2017
EN62311:2008
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>