FULL SWING KIT Studio Simulators Champion Proven User Guide
- August 28, 2024
- FULL SWING
Table of Contents
KIT Studio – Restart Guide
KIT Studio Simulators Champion Proven
This document is designed to help when the KIT either goes into sleep mode or becomes disconnected from the laptop while the USB-C is plugged in. Usually, the FS Golf game is still running, but the KIT is not showing Game Mode and tracking.
- Unplug the USB-C cable from the KIT. Unplug the USB-C from the Laptop.
- Power down the KIT.
- On the Laptop, exit the FS Golf app back to the FS Launcher Games Library.
- Power on the KIT. Wait until the KIT is displaying the data points and battery.
- Plug the USB-C cable into the side of the laptop.
- Then plug the USB-C back into the power port on the side of the KIT.
- There will be a USB symbol that displays on the KIT letting you know they are connected.
- On the laptop, select the FS Golf Kit icon.
- Watch the KIT at this time as it will light up Green 1x and the display screen will change to the Full Swing Kit Game Mode. Once connected there will be a Green Checkmark in the top right corner next to the USB symbol.
- Place the KIT at the end of the Turf Extension if not already.
- Begin Playing!
NOTE : Wi-Fi to the laptop is crucial for these two technologies to connect; ensure you have good signal when operating the Full Swing KIT Studio.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>