phrozen Beam Care Post Curing UV Light String User Manual
- June 3, 2024
- phrozen
Table of Contents
phrozen Beam Care Post Curing UV Light String
Product Specifications
- Voltage DC 7.5V
- Ｗavelength 700 ma
- LED Specifications 405 nm
- Power 5 Watts
Step-by-Step Instructions
Button Functionality
TIMER H.S
When the device is turned on manually, the red indicator light will be
turned on as well. The UV light will then be on continuosly until the device
has been turned off. If the UV light hasn’t been used for 60 minutes, the
device will automatically turn off.
POWER
Click on the Power button to turn on (or turn off) the device. Once the
device has been turned on, the indicator light from the Timer H.S button will
light up in red. Click on the Power button one more time to turn off the
device.
TIMER 1 MIN
When the yellow indicator light is turned on, the UV light will
automatically turn off after 1 minute.
TIMER 10 MIN
When the green indicator light is turned on, the UV light will
automatically turn off after 10 minutes.
CH1
This is the CH1 electric power connector.
CH2
This is the CH2 electric power connector.
Warning
- DO NOT stare directly at the UV light.
- Please wear safety glasses before usage.
- DO NOT touch or poke the UV light source with sharp objects.
- Please do not use electric cords from other devices.
- Do not use any chemicals to rub the lense of the UV light device.
- Do not use it with other adaptors.
Maintenance :
Please use sanitizing alcohol to clean the exterior of the device. Do not
use any oily or corrosive liquids to clean the device.
Please follow Phrozen’s social media accounts and subscribe to our YouTube channel to learn more about printing tips and share ideas with one another. Feel free to contact us if you have any questions.