Shenzhen TK22 Smart Watches User Manual
- June 5, 2024
- Shenzhen
Table of Contents
Shenzhen TK22 Smart Watches
Perating Instructions
Bracelet function description
On/Off Button
- Press briefly to turn the screen on and off. Press briefly on the secondary menu page to directly return to the main dial screen.
- Long press: when initiating, long press on any interface to pop up the shutdown and restart page; if power is off, long press to start.
Standby dial interface
- Slide left to enter the shortcut functions interface, which includes: Step counting, sleep monitoring, heart rate, pressure, blood oxygen, blood pressure, ECG, weather (needs to be connected to the app to display), physiological cycle (needs to be connected to app to be set).
- Slide right to enter the message notification interface.
- Slide onto the status bar to display: Bluetooth, power, date, week, Do Not Disturb mode, brightness adjustment, alarm clock, mobile phone location and About.
- Slide up to enter the main menu function interface.
- Long press the standby dial interface to switch the dial.
Message
- Connect the app. The bracelet will receive mobile phone message notifications.
Status bar
- Bluetooth status: unconnected status displays ; connected status displays .
- Battery power: allows you to view the current battery level of the bracelet.
- Date and week. Connect the app to view the current date and week.
- Do not disturb mode: click to activate it for 1 hour. The watch will execute Do not disturb mode for 1 hour (60 minutes). If it is in the evening, the second option displays “activate until tomorrow morning”. After clicking, it will execute Do not disturb mode until 07:00 h the next day. If it is daytime, the second option displays “activate tonight”. After clicking, it will execute Do not disturb mode at 19:00 h.
- Brightness setting: click to adjust the screen brightness.
- Alarm clock: click + add alarm clock, up to 5.
- Locating the mobile phone: connect the app and click to locate the mobile phone.
- About: click to view the device name, model, MAC address, version number and firmware version.
Shortcut functions
- Step counting: step counting is enabled by default. The interface displays the current number of steps on the column chart of the bracelet. The data is cleared at 0:00 h every day.
- Sleep: sleep is monitored in between 21:00 h and 09:00 h the next day. Sleep data can be checked after 09:00 h every day.
- Heart rate: correctly wear the bracelet on the left or right wrist. You will see the heart rate test interface. The heart rate light will turn on and start measuring the heart rate (continuous heart rate). When you exit the heart rate test interface, the heart rate light will turn off.
- Pressure: correctly wear the bracelet on the left or right wrist. You will see the pressure test interface and the pressure data. Note: You need to connect to the app to open the connection test heart rate function.
- Blood oxygen: correctly wear the bracelet on the left or right wrist. Enter the blood oxygen test interface. Click start and the blood oxygen light will turn on. Start measuring blood pressure. When you exit the heart oxygen test interface, the light will turn off.
- Blood pressure: correctly wear the bracelet on the left or right wrist. You will see the blood pressure test interface. Click start, and the blood pressure light will turn on. Start measuring blood pressure; when you exit the heart pressure test interface, the light will turn off.
- ECG: correctly wear the bracelet on the left or right wrist. Enter the ECG test interface and click start. The ECG light will turn on and start measuring the ECG value. When you exit the ECG test interface, the light will turn off.
- Weather: connect the app to view the weather forecast.
- Physiological cycle : connect the app, set the physiological cycle data, and view the physiological status of the day on the watch screen.
Main menu
-
Exercise sports (outdoor running, outdoor walking, hiking, outdoor cycling, badminton, table tennis, basketball, rope skipping, yoga)
-
Start moving – Select the corresponding motion mode, click to enter the corresponding motion mode, and you can select some target settings: heat, time or no target. After setting, click Start movement to directly enter the corresponding movement mode. The interface displays information such as exercise duration, heat, heart rate and heart rate interval.
-
End movement – In the motion data interface, right-slide the screen to jump to the motion pause interface. Click to return to the movement interface to continue the movement, and click to end the current movement.
-
Motion storage conditions – When the number of steps is greater than 99 or the exercise time is greater than 1 minute, the exercise data can be saved.
-
Exercise records – After the motion is saved successfully, click to view the motion record history.
-
Physiological cycle – Connect the app, set the physiological cycle data, and view the physiological status of the day on the bracelet.
-
Messages – Connect the app to view the details for the received message.
-
Activity records – After generating the data, click to enter the activity record to view the step counting data and column chart of the current day. Slide up to view the daily activity distribution, the 7-day column chart of steps, the 7-day column chart of medium and high intensity activities, and the 7-day column chart of activity hours sequentially.
-
Sleep – After generating sleep data, click to view the sleep curve and sleep duration. Slide up to view the 7-day sleep bar chart. The Sleep monitoring period is from 21:00h to 09:00h the next day. The bracelet sleep data can be checked after 09:00h every day.
-
Countdown – When entering the countdown, you can select 1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 1 hour, 2 hours and Custom. You will get a reminder after the countdown is completed, and the bracelet will vibrate.
-
Heart rate – Correctly wear the bracelet on the left or right wrist. You will see the heart rate test interface. The heart rate light will turn on. Start measuring the heart rate value; when you exit the heart rate test interface, the heart rate light will turn off. Slide up to enter the heart rate range, which includes the following options: warm-up (< 120), fat burning (121-140), aerobic endurance (141-160), anaerobic endurance (161-180) and limit (> 180);
-
Blood pressure – Correctly wear the bracelet on the left or right wrist. You will see the blood pressure test interface. Click the start blood pressure light to turn it on and start measuring the blood pressure. When you exit the heart pressure test interface, the light will turn off.
-
Blood oxygen – Correctly wear the bracelet on the left or right wrist. You will see the blood oxygen test interface. Click start, and the blood oxygen light will turn on and start measuring the blood pressure. When you exit the heart oxygen test interface, the light will turn off.
-
ECG – Correctly wear the bracelet on the left or right wrist. You will see the ECG test interface. Click start, and the ECG light will turn on and start measuring the ECG value. When you exit the ECG test interface, the light will turn off.
-
Remote Control Photography – Connect the app and Bluetooth 3.0 to control the camera function of the mobile phone.
-
Music – Connect the app, open the mobile music player, and control the music. Play, pause and switch songs on the bracelet end.
-
Bluetooth call – Click to enter the Bluetooth call feature.
The mobile phone will look for the settings and search for Bluetooth 3.0. Click the “call watch” feature, then click pairing. If the connection is successful, the device will indicate so. -
Common contacts – Connect the app, then connect Bluetooth 3.0. Add contacts in the app and answer/hang up from the device.
-
Alarm Clock – Click + to add an alarm clock, up to 5.
-
Stopwatch – Click to start timing. Click to pause timing, and click to clear timing data.
-
View Menu – Click to switch between list style and intelligent style.
-
Pressure – Correctly wear the bracelet on the left or right wrist. You will see the pressure test interface. Check the pressure data; to do so, connect the app to start the connection test heart rate function. Slide up to check the range of pressure, which is divided into these options: Relaxation (1-29), Normal (30-59), Medium (60-79) and High (80-99).
-
Weather – Connect the app to check the daily weather.
Slide up to check the weather forecast for the next 6 hours. You can also check the weather forecast for the next 7 days. -
Settings
-
Card Management – Click to enter the card management feature, which includes step counting and monitoring of sleep, heart rate, pressure, blood oxygen, blood pressure, ECG, weather and physiological cycle. You can set the card arrangement order. Click Add to enter the add card management interface to delete and add cards. After saving, return to the dial and slide left to enter the shortcut function interface to display the arrangement order set.
-
Locate a Mobile Phone – Connect the app and click to locate a mobile phone.
-
Sedentary Reminder – Click to open or close the sedentary reminder.
-
QR Code – Click to scan and download the app.
-
Restore Factory Settings – Click to restore the factory settings. Click the icon to clear all data from the bracelet. Click (Cancel) to return to the upper menu
-
About – Click to view the device name, model, MAC address, version number and firmware version.
Binding transferring
-
App download instructions
-
Search application download (or scan QR code on the device) Android end: Search in Google Play and other application markets to download the “fundo health”app.
Android phones: once the transfer ring is installed, the application icon is shown as follows: will be displayed. -
IOS phones: Search the app store to download the transferring.
Apple mobile phone: once the transfer ring is installed, the application icon as shown as follows: will be displayed. -
Bluetooth Binding g
-
Unconnected Status: After the bracelet is powered on, a Bluetooth search is activated. After opening APK / APP, enter More – Connected devices, click Search, select and click the corresponding bracelet device name “RadiantRAS10”to bind the bracelet and transferring successfully.
-
Binding Transfer Ring, Bluetooth Status :
Bracelet time synchronization: the bracelet is successfully bound with the transferring, which means it can synchronize the time and time system between the bracelet and the mobile phone. -
Data Synchronization – Health data: the health data of the bracelet can be synchronized to the app. Enter the app home page to view the health data by entering the step count details, sleep details, heart rate details, blood pressure details, blood oxygen details, pressure details and physiological cycle details. Personal information that needs to be selected in the app includes gender and motion data. The motion data generated by the bracelet can be synchronized with the app. In the app motion interface, you can view the detailed information for each motion data entry.
-
Message notification – Open the corresponding notification permission in the mobile phone. Enter the device message notification in the app, and turn on/off the corresponding third-party application notification switch to control the message transfer at the bracelet end. Note: The corresponding message will only be transferred when the notification pops up in the notification bar of the mobile phone.
-
Continuous Measurement of Heart Rate – Turn on the continuous test of heart rate feature. The bracelet will automatically monitor the heart rate every 20 minutes.
-
ECG Detection – Open the ECG detection function on the bracelet to synchronize data in real time.
-
Wechat campaign – Click to synchronize Wechat notifications.
-
Taking Photos – Click to take a picture. The photo icon pops up on the bracelet. The mobile phone will turn on the camera. Then click the icon to control the mobile phone to take a picture.
-
Do Not Disturb Mode – After the Do Not Disturb Mode is enabled, other types of reminders such as incoming call and short message reminders will not vibrate and will not light up.
If you want to see them, you will have to manually click on the message notifications. The alarm clock is not affected by the Do Not Disturb Mode; -
Common contacts – After adding contacts, the device can synchronize them with the app.
-
Sedentary Reminder – Turn on the long seat reminder switch. When the sedentary time arrives, the bracelet end vibrates and the long seat icon pops up.
-
Alarm Clock Reminder – Click Add alarm clock so the device can synchronize the alarm clock set on the app. When the alarm clock time arrives, the bracelet vibrates and the alarm icon and time pops up.
-
Raise Your Hand feature to light up the screen – Turn on the hand lifting feature to light the screen. When the bracelet is off, lifting your hand will automatically light the screen. After turning off the hand lifting to light screen, hand lifting will no longer light the screen.
-
Firmware Upgrade – It can detect whether the firmware version of the bracelet is the latest version. You will be prompted to update when there is a new version.
-
Dial Push – After entering the app, the dial can be pushed to the bracelet.
-
Unit Settings – Units can be switched between the metric and British systems. You can switch the bracelet, temperature and weather units.
-
Unbinding – Click Unbind device on the device interface to unbind the device. The Apple terminal needs to disconnect from the paired device in the mobile phone Bluetooth setting in order to unbind successfully.
Common troubleshooting -
The watch cannot be started: Press the start button for more than 3 seconds.
-
The battery power is too low: Use the device charger to charge.
-
The watch cannot be charged normally: Verify that the charging contact is making adequate contact with the watch and verify you are using the correct charger. When the power is too low, the charging interface will be displayed after charging for a while.
-
Software problems can be solved by restoring factory settings.
Warranty Description
- When the product is in normal use, if there are product quality problems caused by manufacturing, materials, design and other reasons, the mainboard shall be guaranteed free of charge within one year from the date of purchase, and the battery and charger shall be guaranteed for half a year.
- Free warranty is not provided for faults caused by personal reasons of users, as follows:
- injury caused by unauthorized disassembly and refitting of watches;
- injury caused by careless falling during use;
- any man-made damage or negligence of a third party and misuse (such as water ingress of the main engine, external force cracking, scratch damage of peripheral parts, etc.) are not within the scope of warranty.
- When asking for free warranty, please provide the warranty card filled with the purchase date and the seal of the place of purchase.
- All functions of the product are mainly physical.
| Date of purchase: | Customer signature: |
|---|---|
| Mac Code: | Clerk’s signature: |
| Purchase store: | Store seal: |
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>