COMPUSTAR PRO T11 2-Way LCD, 3-Mile Range Remote Kit User Manual

June 5, 2024
COMPUSTAR

COMPUSTAR-LOGO COMPUSTAR PRO T11 2-Way LCD, 3-Mile Range Remote Kit COMPUSTAR PRO T11 2-Way LCD, 3-Mile Range Remote Kit-
PRODUCTQUICK START CARD

Rechargeable Battery: Your 2WT11R-SS is equipped with a rechargeable battery. Use the included USB cable to charge your remote. We recommend charging your remote before first use. Charge time is approximately 2 hours.
Register online at www.compustar.com within 10 days of purchase to activate your new remote’s warranty.COMPUSTAR PRO T11
2-Way LCD, 3-Mile Range Remote Kit-1 COMPUSTAR PRO T11 2-Way LCD, 3-Mile Range Remote
Kit-2

REMOTE OPTION MENU

COMPUSTAR PRO T11 2-Way LCD, 3-Mile Range Remote
Kit-3 COMPUSTAR PRO T11 2-Way LCD, 3-Mile
Range Remote Kit-4

To reprogram your remote, cycle the key in the ignition 5 times within 7 seconds. Parking lights will flash. Then tap the Lock button on your remote. Repeat for any additional remotes. If you receive two parking light flashes, your Compustar has exited remote programming mode and you must retry.
Questions/comments? Contact us at 888-820-3690 from 8 AM to 5 PM PST.

WARNING

It is the responsibility of the vehicle operator to ensure that their vehicle is parked in a safe and responsible manner.

  1. When leaving the vehicle, it is the user’s responsibility to ensure that the gearshift lever is in “Park” in order to avoid accidents upon remote starting. (Note: Make sure that the automatic vehicle cannot star in “Drive”.)
  2. It is the user’s responsibility to ensure that the remote starter is disabled or put into valet mode before servicing.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.
    CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.

IC COMPLIANCE

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals