eta 7055 Electric Stick Mixer with Accessories Instruction Manual

: June 5, 2024
: ETA

Table of Contents

eta 7055 Electric Stick Mixer with Accessories
SAFETY WARNING
DESCRIPTION OF THE APPLIANCE
PREPARATION FOR USE
USING ACCESSORIES
STORING AND CHARGING THE PROPULSION UNIT
MAINTENANCE
ENVIRONMENTAL PROTECTION
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eta 7055 Electric Stick Mixer with Accessories

SAFETY WARNING

Before the first use, read the instructions for use carefully, look at the picture and store the instructions for use in the future. Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
Check whether the data on the type label corresponds with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according.
The appliance is designed only for household use and similar applications (preparing food)! It is not designed for commercial use and for use in facilities such as kitchenettes for staff in shops, offices or farms, or in other work environments. The appliance is not intended for use by clients in hotels, motels, B&B facilities, and other accommodation facilities.
Do not insert the plug into or take it out of a socket with wet hands and do not pull the power cord!
Never immerse the drive unit into water or wash it in running water!
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged or if it fell into the water. In this case, take the appliance to a special service to check its safety and proper function.
Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
If the power cord of the appliance is corrupted, it has to be replaced by the producer, its service technician, or a similarly qualified person so as to prevent dangerous situations.
Be careful when handling the accessories (immersion blender), the knife is very sharp!
In case you are going to process hot liquid (mixing a hot soup with vegetables etc.), be careful because it may spurt out of the container because of the sudden boil.
Always unplug the appliance from the power supply if you leave it unattended and before assembly, disassembly, or cleaning.
Use the appliance in the working position only at places with no risk of turning over and Min sufficient distance from heat sources (e.g. heater, stove, grill, etc.) and wet surfaces (e.g. sinks, wash basins, etc.)
Use the appliance designed for this type only. Using another appliance can represent a risk for the operator.
Do not insert the appliance into anybody’s holes.
Do not switch on the appliance without substances put in!
Do not remove the appliance if the drive unit is in operation!
The work adapters cannot be exchanged when the drive unit is in operation for safety reasons.
Before you remove the appliance or the drive unit from the container, let the rotating parts stop completely.
When mixing, blending, or whisking liquids, never put in more liquid than 500 ml and process the liquids only in the mixing container.
Do not process food at temperatures exceeding about 80 °C.
Never insert e.g. fingers, fork, knife, spatula or spoon into the rotating parts of the appliance and the accessories.
Do not let children use the appliance without supervision!
If the processed food starts to stick to the appliance (e.g. on knives, the beater, the container), switch off the appliance and clean the accessories carefully (e.g. using a spatula).
Check the condition of the power cord of the appliance regularly.
Make sure that the power cord does not hang over the edge of the working table where children could reach it.
Do not wind the power cord around the appliance; this will extend its life.
The power cord must not be damaged by sharp or hot objects, or open fire; it must not be sunk into water or bent over sharp edges.
If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid standards.
The adaptor supplied with this appliance is intended for this appliance only, do not use it for other purposes. Also, use only the supplied adaptor with this appliance, do not use any other adaptor
for charging (e.g. from another appliance).
Never charge the appliance with a damaged charging stand or charging adaptor.
Do not use the charging stand or the charging adapter to charge other appliances!
Do not remove batteries during normal operation. Remove the batteries only when the appliance is to be disposed of (see. section V. ECOLOGY).
Never use the appliance for any other purpose than for that described in these instructions for use!
The producer does not undertake any responsibility for damage caused by improper use of the appliance and the accessories (e.g. food deterioration, injury by knife edge, fire, etc.) and its guarantee does not cover the appliance in the case of failure to comply with the safety warnings above.

DESCRIPTION OF THE APPLIANCE

A– propulsion unit
- A1 – safety switch
- A2 – ON/OFF switch
- A3 – Battery indicator
B – blending attachment
C – blending dish
D – charging attachment and holder
E – charging connector
F – charging adaptor

To start the motor is necessary to push the safety switch.

PREPARATION FOR USE

Remove all the packing material and take out the accessories. Remove all possible adhesion foils, stick-on labels or paper from the appliance. Before the first use, wash the parts that will be in contact with food in hot water with detergent, rinse thoroughly with clean water and wipe it dry. Charge the appliance fully before first use (see. section V. STORING AND CHARGING THE PROPULSION UNIT). Make sure the appliance is fully charged when using it every time (after unplugging the charging adaptor, the indicator will light up at the “MAX” level when the appliance is on. If the indicator flashes at the “MIN” level, the battery is almost empty and needs to be recharged.

The appliance is equipped with a safety button (A1) which needs to be held down during operation. Otherwise, the appliance will not operate (we recommend holding the safety button with one finger and holding the A2 button to put the appliance into operation with another finger.

Mounting and removal of the mixing adapter

Slide mixing adapter B to drive unit A, then fix it by turning it (Fig. 2). Remove the adapter in the opposite direction.

USING ACCESSORIES

Please consider the following tips for preparing food as examples and inspiration, the purpose of which is not to provide instructions, but to show various possibilities of preparing food. The times of food preparation (processing) are only approximate and they range from seconds to minutes. Choose the amount of processed food so that the maximum volume of the containers marked with the gauge line is not exceeded. A bigger amount of processed food has to be divided into several doses and the volume of the containers has to be checked regularly.

We recommend stopping work from time to time, switching off the appliance, and removing possible food that was stuck onto the mixing/whisking adapter, the sickle-shaped knife, the containers, or the lid (see par. I. SAFETY WARNING).

Mixing adapter (B)

Be careful, knife edges are very sharp! The mixer is intended for mixing juices, milkshakes, milk, sauces, soups, mayonnaise, children‘s and dietary food, making purée, etc.

ATTENTION: The maximum time of processing is 1 minute. Then wait for 10 – 15 minutes, which is necessary for the drive unit to cool down.

Hold stick mixer A in your hand and put mixing adapter B into container C filled with food. By pushing switch A2 you will start the drive unit. When working, move the mixer in the container to process the food thoroughly. Food is processed in about 10 seconds to 1 minute. After finishing work, release the switch, remove the adapter from the container and clean it.

Recommendation

It is recommended to cut tough ingredients into small pieces. Do not process very hard materials (e.g. ice cubes, etc.). The knife would be blunt soon.
Hard ingredients (e.g. legumes, soya beans, etc.) should be soaked in water before processing.
The longer you process the food with the mixer, the smoother the result will be.
In the case of liquids that create foam (e.g. milk), never fill container C up to the „MAX“gauge mark to prevent overflowing.
If you are not satisfied with the result, switch off the appliance, mix the ingredients with a spatula, take some part of the ingredients or add a little liquid.

Amount of the food and processing times

STORING AND CHARGING THE PROPULSION UNIT

If the indicator starts flashing at the “MIN” level during operation, turn the appliance off.
Remove the blending attachment and place it into the charging attachment. The blending attachment may be placed in the stand as well but only in a compartment that is not intended for charging the appliance. (pic. 3)
Plug in the charging connector into the charging socket that is placed in the charging attachment. Then plug the charging adaptor into an el. outlet. The charging indicator will flash. The appliance is equipped with 3 LED indicators. If all three are lid (up to the MAX level), the appliance is charged and ready for use.
Charging of the battery takes approx. 2 hours. Battery capacity is about 15 minutes.
After the appliance is charged, unplug the charging adaptor from the el. outlet and the charging attachment. Leave the appliance in the charging attachment that also serves for storing or take it out of the charging attachment and assemble it and use it as desired.

MAINTENANCE

Do not use rough and aggressive detergents!

Clean drive unit A with a soft and wet cloth with a little detergent. Make sure that water does not get inside the appliance! Wash the accessories in hot water with detergent right after use, rinse it in clean water and wipe it till dry (you can also wash accessories C in a dishwasher – but not mixer B). The end piece with the shaft of mixer B must not be immersed during cleaning. Be very careful when cleaning mixing adapter B. Make sure that the cutting edges of the accessories are not in contact with hard objects that make them blunt and thus they reduce their effectiveness.

Some food can color the accessories in some way. But this does not affect the function of the appliance and it is not a reason for a claim. This coloring usually disappears after some time. Never dry plastic moldings over a heat source (e.g. heater, electric/gas stove). Store the appliance after cleaning at a dry, dustfree and safe place, out of reach of children and incapacitated people.

ENVIRONMENTAL PROTECTION

If the dimensions allow, there are labels of materials used for the production of packing, components, and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authorities or at a collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations.

More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to the expiration of the right to guarantee repair!

TECHNICAL DATA

Voltage (V): specified on the type label
Input (W): specified on the type label
Container volume – chopping (ml): 700
Weight of drive unit (kg) about: 0.5

The product has received EC declaration of conformity according to Act as amended. The product matches the requirements of the below statutory order as amended.

Committee Regulation No. 2006/95/EC as amended, setting the technical requirements of the electrical appliance as low.
Committee Regulation No. 2004/108/EC as amended, setting the technical requirements of products in terms of their electromagnetic compatibility.

The product is in conformity with the European Parliament and European Committee Regulation No. 1935/2004/EC re. Materials and objects designed for contact with food.

The manufacturer reserves the right for any insignificant deviations from the standard finished product that do not have any effect on the functioning of the product.