eta 9777 Kasia Digital Kitchen Scale User Manual

: June 5, 2024
: ETA

Table of Contents

eta 9777 Kasia Digital Kitchen Scale
DESCRIPTION OF THE APPLIANCE
SAFETY PRECAUTIONS
PREPARATION FOR USE
OPERATION INSTRUCTIONS
Operation
MAINTENANCE
ENVIRONMENT
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eta 9777 Kasia Digital Kitchen Scale

eta 9777 Kasia Digital Kitchen
Scale product

DESCRIPTION OF THE APPLIANCE

eta 9777 Kasia Digital Kitchen Scale fig
1

A1 — unit of scale
A2 — display
A3 — plate
A4 — button – switching the scale on/off and selecting the weight reset function
A5 — button – change the units mode (g>oz>ml(water)>ml(milk))
A6 — battery cover

SAFETY PRECAUTIONS

Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
The product is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Do not immerse the appliance into water and wash under running water!
When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
If the scale was stored in lower temperatures, let it adjust to the room temperature.
Use the scale horizontally only on places without danger of turning over, keep the appliance sufficiently far from heat power sources (e.g. oven, stove, fireplace, heat radiators) and strong electro-magnetic field (e.g. microwave oven, radio, mobile phone).
Do not expose the appliance to direct sunlight, low or high temperatures and high moisture.
Unstable or soft pad under the appliance may influence accuracy of the appliance negatively.
Protect the scale against dust, moisture, chemicals and abrupt temperature changes.
Handle the scale with care not to damage it (do not overload and throw it).
Do not disassemble the scale and do not take any parts out.
Do not put any objects on the surface of the scale during storing, they could be damaged.
If you do not intend to use the scale for a long time, remove battery from them.
If the battery is leaking, remove it immediately; it can damage the scale.
Dispose of a discharged battery in a suitable way (see par. V. ENVIRONMENT ).
Never use the appliance for any other purpose than for that described in these instructions for use!
Keep battery and scale out of reach of children and incapacitated people. A person, who would swallow the battery, must seek medical help immediately.
All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
The pictures in instruction manual are only illustrative.
The manufacturer is neither liable for damage caused by improper use of the appliance
(e.g. degradation of foods, damage to the appliance etc.) nor for damage caused by failure to observe the safety precautions by operation of the warranty.

PREPARATION FOR USE

Unpack the scale from packaging. Before the very first use, wipe that part of the appliance that may come in contact with foods.

Installation of battery
Battery: 1x 3V CR2032 (included; if there is an insulation band on the battery, remove it to connect the battery). The supply terminals must not be short-circuited.

To replace battery
Remove the battery compartment cover on the back side of the scale by shifting it in the direction of the arrow (see Fig.) and connect a new 3V battery to the connectors. Please take note to the polarity. The other way round replace the battery cover until it engages, an audible click will be heard.

OPERATION INSTRUCTIONS

Note

You can put the container or bowl on the scale even before switching the scale on. If you do so, the scale will automatically switch on with the value 0.
In case that you put the bowl or container on the scale after it has been switched on, press the TARE button A4 (weight reset). The display will show 0. You can then proceed with the required measuring.
Auto shut-off occurs if display shows ‚0‘ or shows the same weight reading for 120 sec.

Operation

Put the scale on a suitable flat surface and switch it on using the TARE button A4.
Put the bowl (if you use one) on the scale before switching it on. Do not put things you want to weight on the plate before you turn the appliance on!
After the scale is switched on, first of all it is calibrated. When the display shows 0, the appliance is ready for weighing.
Using the UNIT button A5, set the required mode / units of measurement.
Put the food (object) in the middle of the weighing plate A3. When weighing liquid or loose material (e.g. flour), place it in a bowl or container prepared in advance (on the weighing plate A3). Then wait until the value on the display becomes stable.
The scale can then be switched off by holding the TARE button A4 for a longer time or wait ca. 120 seconds after which the scale switches off automatically.

„TARE“ function
To weigh different loads consecutively without removing loads from the scale. Put first Load on the scale, get weight reading. Press A4 TARE button to reset the LCD reading to „0“ before adding next load. Add another item and the display will read the added weight. You can repeat this operation. If all products are taken away from the weighing plate,a negative value will appear on the display.
Attention
Remove the excessive weight product from the scales to avoid damage to the appliance.

Error messages are shown on the scale display

Lo — replace the batteries
EEEE — scale overload, the weight exceeds 8 kg

MAINTENANCE

Clean the scale only after it has cooled down! Do not use coarse or aggressive detergents (e.g. sharp things, thinners or other solvents)! Wipe the scale surface with a soft wet rag. Pay attention no water penetrates the appliance. DO NOT immerse the scale in water or use chemical/abrasive cleaning agents.All parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavored/colored foods. Avoid contact with acid or citrus juices.

ENVIRONMENT

If dimensions permit, all pieces have printed symbols of materials used for the production of packing, components, and accessories as well as recycling symbols. The symbols on the product or documentation mean the electric or electronic parts used in the appliance may not be disposed of together with communal waste. Hand over the electric or electronic part to a waste collection yard for free disposal. Proper disposal of the product will help preserve valuable natural resources and prevent potential negative impacts on the environment and human health that would otherwise result from improper waste disposal. For more details, please contact your local authorities or collection yard. Fines may be imposed for improper disposal of this type of waste pursuant to national directives. Remove flat batteries from the appliance and dispose of them in a suitable way using special collection centers. Do not incinerate the batteries!

Specialized service is required for overhaul maintenance or maintenance requiring disassembly of the internal components of the appliance! The right for warranty repair expires if the above-mentioned instructions are not adhered to.