babyletto M21623 Bento Collection User Manual

M21623

hey there,
It’s time to bring that dream nursery to life with babyletto. We are here to help with all the tools and resources you need to design a space that feels like you. Our babyletto community is important to us so we’re always sharing styling tips, ideas to try, and unique inspiration. Share your style with us at #babyletto
Welcome to the babyletto family

Getting started

If you need help or have questions, please let us know!

BABYLETTO.COM/SUPPORT
323-282-5163

Parts not to scale

Hardware actual size

Assembly instructions

tray parts

hardware

actual size

restraint system

WARNING:

| |
---|---|---
• Secure your baby on the pad with the straps and buckle.| • After changing, unbuckle the straps.| • Never leave your baby unattended on the
changing tray.

anti-tip kit installation

Children have died from furniture tipover.
To reduce the risk of furniture tipover, ALWAYS install tip over restraint provided.

hardware
actual size

Find your wall material and follow steps to attach the anti-tip kit to your wall.
Drywall or plaster with available wood stud:

• Mark the attachment point with a pencil, 1” to 2” (25-50 mm) below top of dresser, positioned over a wood stud.
• Drill 1/8-inch (3 mm) diameter pilot hole into the wood stud, on the pencil mark.
• Following the appropriate pictogram instructions on the following pages, drive the screw with washer through the textile strap and tighten screw firmly into the wood.

Drywall without available wood stud:

• Mark the attachment point with a pencil, 1” to 2” (25-50 mm) below top of dresser.
• Drill 3/8-inch (9 mm) diameter hole through the wall, on the pencil mark.
• Drive the plastic anchor into the hole, using a hammer if needed.
• Following the appropriate pictogram instructions on the following pages, drive the screw with washer through the textile strap and
  tighten screw firmly into the plastic anchor in the wall. Do not over-tighten.

If your wall material is not listed here, or if you have any questions, consult your local hardware store.

Fasten strap to back of dresser.

Mark spot on wall 1-2” (25-50mm) below the top of the dresser.

Follow the “Find Your Wall Material” instructions on the previous page.
Drill a 3/8″ (9 mm) hole and insert plastic anchor into hole (If needed).

 DO NOT OVERTIGHTEN THE SCREWS.

WARNING:
A changer pad is not included. Sold separately.
Babyletto M5319BL 31” x 16” x 4” (79 x 41 x 10 cm) contour changer pad is recommended.

storage

Because materials respond to temperature and humidity, it is important to store furniture in controlled environments.
Furniture should not be placed in direct sunlight or near air-conditioning outlets, radiators, heaters, or humidifiers.
Any changes such as extreme heat or cold, dampness, or dryness, may cause noticeable shrinkage or swelling of wood. Direct sunlight may affect the coloring of  materials over time.

care and cleaning

To clean wood or metal parts, use a lint-free, soft cloth with a non-toxic cleaner. Wipe dry immediately. To avoid scratches or other damages, do not use abrasive chemicals or materials. For fabrics, we recommend using a non-toxic foaming fabric cleaner or leather cleaner where appropriate. Touch up kits are available for
purchase by contacting us at:
323-282-5163 or INFO@MDBMAIL.COM

registration

Registering your product is simple. You can do so at:
BABYLETTO.COM/REGISTRATIONS

part replacement

If you would like to order replacement or missing parts, please visit us at: BABYLETTO.COM/PARTS
or you can contact us by mail at: 8700 REX RD. PICO RIVERA, CA 90660

one year limited warranty

Oops! Did we make a mistake? No worries, your Babyletto product is covered under warranty for one year after the date of purchase. For more details on our warranty policy, please visit: BABYLETTO.COM/WARRANTY

WARNING:

BEFORE USE

• Read all instructions before use of the changing table.
• Keep instructions for future use.
• Do not use changing table if it is damaged or broken.
• If a means of attachment to the contoured changing pad or add-on changing unit is provided, the instructional literature shall provide instructions on how to secure the contoured changing pad or add-on changing unit to the support surface.
• This product is not intended to be used as a changing table without adult supervision. Use of the product without this may result in death or serious injury to your child from falling. Follow all instructions on attaching and using the changing table.
• Recommended maximum weight of the occupant for which the changing table, add-on changing unit, or contoured changing pad is 30 lb (13.6 kg).

SUFFOCATION HAZARD

• Babies have suffocated while sleeping on changing areas: changing area is not designed for safe sleep. NEVER allow baby to sleep on changing area.

FALL HAZARD

• Children have suffered serious injuries after falling from changing areas. Falls can happen quickly.
• STAY within arm’s reach.
• ALWAYS secure this pad to the support surface by using the provided hardware. See instructions.

20 JAN 2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>