babyletto M10326 Sprout Changer Dresser Instruction Manual

: September 13, 2024
: Babyletto

Table of Contents

babyletto M10326 Sprout Changer Dresser
Getting started
Parts not to scale
Hardware
Assembly instructions
Anti-tip kit installation
Care and cleaning
One-year limited warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

babyletto M10326 Sprout Changer Dresser

hey there
It’s time to bring that dream nursery to life with babyletto. We are here to help with all the tools and resources you need to design a space that feels like you. Our babyletto community is important to us so we’re always sharing styling tips, ideas to try, and unique inspiration. Share your style with us at #babyletto Welcome to the babyletto family

Getting started

If you need help or have questions, please let us know!

BABYLETTO.COM/SUPPORT ( 323 ) 2 8 2 – 5 1 6 3

Parts not to scale

Hardware

actual size

Assembly instructions

restraint system

WARNING:

Secure your baby on the pad with the straps and buckle.
After changing, unbuckle the straps.
Never leave your baby unattended on the changing tray.

Anti-tip kit installation

WARNING
Children have died from furniture tipover.

ALWAYS install anti-tip device provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
NEVER open more than one drawer at a time.
Place heaviest items in the lowest drawers. This is a permanent label. Do not remove!

Hardware actual size

Find your wall material and follow steps to attach the anti-tip kit to your wall.

Drywall or plaster with available wood stud:

Mark the attachment point with a pencil, 1” to 2” (25-50 mm) below top of dresser, positioned over a wood stud.
Drill 1/8-inch (3 mm) diameter pilot hole into the wood stud, on the pencil mark.
Following the appropriate picto-gram instructions on the following pages, drive the screw with washer through the textile strap and tighten screw firmly into the wood.

Drywall without available wood stud:

Mark the attachment point with a pencil, 1” to 2” (25-50 mm) below top of dresser.
Drill 3/8-inch (9 mm) diameter hole through the wall, on the pencil mark.
Drive the plastic anchor into the hole, using a hammer if needed.
Following the appropriate picto-gram instructions on the following pages, drive the screw with washer through the textile strap and tighten screw firmly into the plastic anchor in the wall. Do not over-tighten.

If your wall material is not listed here, or if you have any questions, consult your local hardware store.

DO NOT OVERTIGHTEN THE SCREWS.

CHANGER TRAY IS NOT INCLUDED, SOLD SEPARATELY. CHANGER TRAY M0219 OR M0619 IS RECOMMENDED.
READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE INSTRUCTIONS FOR FUTURE USE.
KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
Recheck all screws and bolts to be sure they are fastened securely.
Do not over-tighten.

Storage
Because materials respond to temperature and humidity, it is important to store furniture in controlled environments. Furniture should not be placed in direct sunlight or near air-conditioning outlets, radiators, heaters, or humidifiers. Any changes such as extreme heat or cold, dampness, or dryness, may cause noticeable shrinkage or swelling of wood. Direct sunlight may affect the coloring of materials over time.

Care and cleaning

To clean wood or metal parts, use a lint-free, soft cloth with a non-toxic cleaner. Wipe dry immediately. To avoid scratches or other damages, do not use abrasive chemicals or materials. For fabrics, we recommend using a non-toxic foaming fabric cleaner or leather cleaner where appropriate. Touch-up kits are available for purchase by contacting us at ( 3 2 3) 2 8 2- 516 3 or INFO@MDBMAIL.COM

registration
Re˜isterin˜ your product is simple.
You can do so at BABYLETTO.COM/REGISTRATIONS

part replacement
If you would like to order replacement or missing parts, please visit us at: BABYLETTO.COM/PARTS or you can contact us by mail at: 870 0 REXRD.PICO RIVERA,CA 906 60