mo-vis P002-77 Heavy Duty Joystick User Manual
- June 4, 2024
- mo-vis
Table of Contents
mo-vis P002-77 Heavy Duty Joystick
You can find this manual in English on our website.
About this manual
User manual
Thank you for choosing a mo-vis product! This manual contains useful and
important information about your device. Please read it carefully before use
and store it safely for future reference. Our team (or your authorized dealer)
will be happy to answer your questions.
mo-vis bv
Biebuyckstraat 15D. 9850 Deinze. Belgium. http://www.mo-vis.com. contact
@mo-vis.com. +32 9 335 28 60.
Warning labels
Please read this manual, the safety instructions, and the warning texts carefully, in order to reduce the risks associated to the device. Our products are safe under normal and reasonably foreseeable operating conditions.
- NOTE : This symbol indicates general notes and information.
- CAUTION : This symbol indicates caution for a hazardous situation that, if not avoided, could result in minor or moderate injury.
- WARNING : This symbol indicates a warning for a hazardous situation that, if not avoided, could result in death or serious injury.
Support, scrapping & recycling
Technical support
TROUBLE: In case of technical problems:
- Contact your dealer
- If your dealer is not available or unknown, please contact mo-vis: [email protected] or +32 9 335 28 60.
Always state the product code and device serial number when contacting us. This ensures you are provided with the correct information.
Spare parts and accessories
Contact mo-vis or your dealer for more information about spare parts and
accessories.
Scrapping & recycling
CAUTION:
For scrapping, adhere to your local waste legislation. Dispose of obsolete
electronic parts responsibly in accordance with local recycling regulations.
Limited liability
mo-vis accepts no liability for personal injury or damage to property that may arise from the failure of the user or other persons to follow the recommendation, warnings and instructions in this manual.
- CAUTION : This product should only be installed by a qualified service engineer.
- NOTE : All mo-vis manuals can be found at http://www.mo-vis.com where they can be consulted in PDF format.
- NOTE : In case any serious incident occurs in relation to this device, this should be reported immediately to mo-vis and the competent authority of the Member State in which the user is established.
Intended Use
The Heavy-Duty Joystick:
- is a joystick module that can be connected directly to the wheelchair electronics to control the wheelchair functions
- is a large format, extremely durable, proportional joystick for all-around heavy-duty use
- can be used as a hand or foot-operated joystick
- has been developed for users with excessive force (spasticity, dystonia…)
Features
The Heavy Duty Joystick is:
- Fully proportional with increased throw and force (ca. 650 gr – 22.93 oz)
- built in a compact housing, with two 3.5 mm jacks for switch input: (1) red = on/off power wheelchair – (2) yellow = mode of the power wheelchair.
- is fully adjustable to individual possibilities and needs with well-thought-out electronics (mini USB connection).
- is compatible with multiple types of wheelchair electronics.
- LED light in the housing which will start to flash in case of error
Operation
The movements of the joystick are translated according to the movements of the wheelchair, e.g. driving or menu navigation.
A common practice to navigate the wheelchair with the joystick is as follows:
- Direction: point the joystick in the direction you want the wheelchair to move. The wheelchair then moves in that direction.
- Speed: the further you move the joystick from the default (center) position, the faster the wheelchair moves.
- Stop: whenever you release the joystick, the joystick moves back to the default (center) position, and the wheelchair stops.
- CAUTION: Avoid hitting obstacles during driving.
- WARNING: When the LED light flashes and/or after every incident with the wheelchair or the mo-vis device, contact your dealer immediately to perform a functional test.
Parts and accessories
Package
The Heavy Duty Joystick package consists of:
EXAMPLE| P002-73 HEAVY-DUTY JOYSTICK OMNI| P002-77 HEAVY-DUTY
JOYSTICK R-NET
---|---|---
| Heavy Duty Joystick set with integrated SUB D9 cable and 2 M612 bolts for
mounting| Heavy Duty Joystick set with integrated R- net cable and 2 M612
bolts for mounting
- D-P002-73-70-MX Heavy Duty Joystick User Manual
- D-P002-73-70-M1 Heavy Duty Joystick Installation Manual
EXAMPLE| P002-73 HEAVY-DUTY JOYSTICK OMNI| P002-77 HEAVY-DUTY
JOYSTICK R-NET
---|---|---
| |
Accessories
For mounting and further personalization, the following accessories are
available:
| EXAMPLE | PRODUCT DESCRIPTION |
|---|---|
| M002-28 Heavy Duty Joystick mounting ring assembly |
Unit detail
- The connections of the unit have protective covers to avoid the intrusion of dust or moist during usage.
- When in use, a green LED on the joystick indicates the proper functioning of the unit. In case of an error, the LED light will flash. See the Installation Manual for more information.
Spare parts
Spare parts and accessories must be ordered by the dealer at mo-vis bv.
Always mention the product code of the desired item.
Qualifications
- CAUTION : Only a qualified service engineer may install the device.
- CAUTION : An incorrect programming of the wheelchair or device electronics, may cause damage to the devices or injury to the user.
First-time use
- CAUTION : Only a qualified service engineer may install the device.
- CAUTION : An incorrect programming of the wheelchair or device electronics, may cause damage to the devices or injury to the user.
- CAUTION : A qualified service engineer should assist during first-time use of the device and make sure that all functions are clear to the user, including what to do in case of problems or doubt.
Cleaning
WARNING:
As dust and dirt could lead to reduced functionality, all parts of the device
should be cleaned on a regular basis (monthly) or whenever needed.
- Gently remove dust and dirt with a damp cloth.
- Use only non-aggressive disinfectant cleaning agents.
- CAUTION: Do not immerse in water or use excessive amounts of liquid.
- CAUTION: Do not apply additional lubricants to the moving parts.
The handles of the joystick can be removed to clean them.
- You may shortly immerse the handle in warm water with a gentle cleaning agent. Let the handle dry before putting it back on.
- If the handle is damaged, worn out or remains dirty, please contact your authorized dealer or mo-vis to replace it.
Warnings and limitations
- NOTE: This product complies with the limit values for Electromagnetic Compatibility (EMC) with respect to power wheelchairs, as set out in the harmonized standards for the EU in the Medical Device Regulation, No. 2017/745.
- WARNING: Do not cover or block the device to avoid uncontrolled behavior of the device or the wheelchair.
Connection options
You can connect 1 or 2 switches to the joystick:
- Red = power on/off
- Yellow = mode
- WARNING: The on/off switch must be available to the user at all times. This allows to instantly stop the wheelchair in case of problems or an emergency.
- WARNING: Always power off the device when the user is no longer in the wheelchair to avoid unauthorized access or accidental movements.
Combinations
There are different versions of this device available for combination with
different wheelchair electronics. Please refer to the Installation Manual of
this device for more information.
Dimensions
175 x 86 x 86 mm / 6.89 x 3.38 x 3.38 in (HxWxD).
mo-vis
moving forward together
mo-vis bv. Biebuyckstraat 15D. 9850 Deinze – Belgium. www.mo-
vis.com. [email protected]. +32 9 335 28 60 Go to our website for more information on our
products or share your experience with us via email.