babyletto 9016 Lolly 6 Drawer Double Dresser Instructions

babyletto 9016 Lolly 6 Drawer Double Dresser

Thank you for purchasing a Babyletto nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.babyletto.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers. Due to the nature of our materials, some variation in color, grain, or texture is to be expected.We hope you and your growing family enjoy our product.
With thanks,
Babyletto

• You will need two people to assemble this 6 drawer double dresser.

• Tools Needed (not included)

PARTS

ASSEMBLY INSTRUCTIONS

ANTI-TIP KIT

• Children have died from furniture tipover.
• To reduce the risk of furniture tipover,
• ALWAYS install tip over restraint provided.

HARDWARE

actual size

Find your wall material and follow steps to attach the anti-tip kit to your wall.

Drywall or plaster with available wood stud

• Mark the attachment point with a pencil, 1” to 2” (25-50 mm) below top of dresser, positioned over a wood stud.
• Drill 1/8-inch (3 mm) diameter pilot hole into the wood stud, on the pencil mark.
• Following the appropriate pictogram instructions on the following pages, drive the screw with washer through the textile strap and tighten screw firmly into the wood.

Drywall without available wood stud

• Mark the attachment point with a pencil, 1” to 2” (25-50 mm) below top of dresser.

• Drill 3/8-inch (9 mm) diameter hole through the wall, on the pencil mark.

• Drive the plastic anchor into the hole, using a hammer if needed.

• Following the appropriate pictogram instructions on the following pages, drive the screw with washer through the textile strap and tighten screw firmly into the plastic anchor in the wall. Do not over-tighten.
  If your wall material is not listed here, or if you have any questions, consult your local hardware store.

• Fasten strap to back of dresser.

• Mark spot on wall 1-2” (25-50mm) below the top of the dresser.

• Follow the “Find Your Wall Material” instructions on the previous page.
  Drill a 3/8″ (9 mm) hole and insert plastic anchor into hole (If needed).

• Fasten strap/bracket by screwing into plastic anchor or wood stud.

• Complete!

• Drywall without available wood stud.

• Drywall or plaster with available wood stud.

READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE INSTRUCTIONS FOR FUTURE USE. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten.

IMPORTANT
As with all infant and baby furniture, it is important to check fasteners, screws, and bolts periodically for tightness. Parents should ensure a safe environment for their children by checking the furniture regularly before placing a child in the product.

ONE YEAR LIMITED WARRANTY

We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models.
This warranty does not cover any damaged or defective parts that result from installation and assembly, normal wear and tear, abuse, negligence, improper use or alteration to the finish, design, and hardware. The specific legal rights of this warranty may vary from state to state. Some states do not allow any exclusion or limitation of incidental damages. Some states do not allow limitation on how long an implied warranty lasts.

Storage

• Pine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or air-conditioning vents.
• Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. As with all your fine furniture, blot up spills immediately.

Registering your product is even easier than before. You can register your product on our website at : www.babyletto.com/registrations
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING

PARTS PLEASE VISIT US AT:
WWW.BABYLETTO.COM/PARTS

OR YOU CAN CONTACT US BY MAIL: BABYLETTO
8700 REX RD., PICO RIVERA, CA 90660
TEL: 323-282-5163

References

• Replacement Parts – Babyletto
• Registrations – Babyletto

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>