XPARKIN ZQS100 Outdoor Wireless Solar Security Camera User Manual
- June 13, 2024
- XPARKIN
Table of Contents
User Manual
Outdoor Wireless Solar Security Camera
ZOS 100
About us
Thank you for your purchase!
Xparkin is a company focusing on outdoor security cameras, we start our
business on 2009, offer all kinds of cameras for home security, wired and
wireless.
We aim at providing safety for home: “ Safety, a way of life!”
In recent years, we have continued to upgrade and iterate on our products,
developing new versions and functional cameras. Considering that some families
have difficulties in installing wires, we have newly launched battery-powered
low-power cameras, solar- powered cameras, cellular cameras, which are simpler
to install and solar-powered cameras can better solve the problem of frequent
charging of cameras.
If you have any problems about our product, feel free to contact us via email
below: highbaoservice@126.com
Package List
Attention
- The camera does NOT currently support 5GHz Wi-Fil Please make sure your phone is connected to a 2.4GHz Wi-Fi.
- Suggested installation height: 10ft
- Test the Wi-Fi signal strength before installation, to make sure to install it where there is a good signal.
- At least 1-3 hours direct sunlight to the camera every day is needed.
- APP can not be used on PC/NVR.
- Please click “Allow” on all access during setting.
- Fully charge the camera at first use.
- Any problems with your connection, please contact us!
How Do I Get Connected?
Note: Fully charge the camera at first use.
-
Download the “UBox” APP in Google Play Store or APP Store
-
Access Permissions:
-
Register with email or login with Amazon or Apple account
-
Insert SD card before you power on the camera(SD card is not included)
-
Power on the camera and check that the blue indicator LED is blinking, or hear the voice prompt “The camera is now ready to begin pairing”.
Note: If the red indicator LED is on instead of the blue indicator LED, please press and hold on the reset button for 4-5 seconds to reset the device. Release the button after you hear the prompt “ System reset” -
Set device information, and then click “Next”
-
Select Wi-Fi (Please ensure your phone connect to the 2.4GHz Wi-Fil The camera does not currently support 5GHz Wi-Fi.)
How Do I Mount It on the Wall?
-
Check the Wi-Fi Signal Strength
Make sure to install it where there is a good signal -
Recommend Installation Height: 10ft
-
Install the solar panel
A. Install on top of the camera
B. Install separately -
Install the camera
Stick the position paper on the wall, drill 4 holes according to the red dots. Then install the bracket with tapping screws and screws.
Finally install the camera.
Note: Adjust the solar panel installation angle to get more sunlight
APP Instructions
Share permissions
Input the invited user’ s email to share the management with your family
members
Detection Sensitivity
Off – No longer trigger(Most power saving)
Low – Long time linger trigger, about 10 seconds(Low power consumption)
Medium – Short time linger trigger, about 5 seconds(very power
consumption)
High – Immediately triggers, about 0.2 seconds(Most power consumption)
Sleep Delay
There are 15s, 30s, 60s for you to choose, it will record a detection for 15s,
30s, 60s.
The default value is 15s, if you want a longer record, you can adjust it, but
it will be more power consumption.(can not record 24h)
Common Settings
You can turn on/of the default sound settings
FAQ
If you have met any problems you can’t solve, just email us: highbaoservice@126.com
Question List:
Q1: Why is there no sound?
Q2: Why are there delays in recording?
Q3: Can’ treceive notifications?
Q4: Can’t connect to the camera?
Q5: Can’t connect after changing the Wi-Fi?
Q1: Why is there no sound?
A: Check if you have turn off the sounds with voice button in APP
Q2: Why are there delays in recording?
A: 1. Adjust the PIR sensitivity to “High” level; 2. Install the camera in suggeted height: 10ft
Q3: Can’ t receive notifications
A: Make sure you have allowed the notification accessment
Q4: Can’ t connect to the camera
Q: 1. Reboot the router 2. Change the position to where there is a good Wi-Fi signal 3. Adjust the direction of the antenna
Q5: Can’ t connect after changing the Wi- Fi
A: Reset is needed after Wi-Fi is changed
Frequently Asked Questions
More other questions you can get the answer here in the APP.
Contact us in the APP
Contact us in the APP or email us: highbaoservice@126.com
Warranty
If the camera doesn’t work or stop working in 6 months, please contact us to
get a refund or a replacement.
How to obtain service?
Send us an email and state your problems, highbao team will reply you in 48h.
Our email address: highbaoservice@126.com
If you have problems in installation, connection or any other questions, you
can also feel free to contact us, we will provide you professional advice.
Hope you enjoy it!