babyletto M11288 Kiwi Glider Recliner Instruction Manual

babyletto M11288 Kiwi Glider Recliner

Congratulations! This product will provide many years of service if you adhere to the following guidelines for care, maintenance, and operation. This product is for residential use only. Any insti-tutional use is strictly prohibited.

DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THEIR OWN SPECIFIC QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.

Maintenance and Cleaning

To preserve the hand-crafted quality of your furni-ture, we recommend using a cotton cloth and a non-toxic cleaner. Periodic polishing or oiling on wood stains will help to maintain the rich wood tones. For our upholstered products, we recom-mend using water to clean suede products and light foam cleaners for all other fabrics.
If your child is teething, some furniture’s finish may be affected. Be assured that our low-VOC lacquers, finishes and glues comply with applicable regula- tions and standards. Touch up kits and replace-ment parts are available for purchase upon request by contacting Babyletto at: 323. 282. 5163.

Important Note:

Improper assembly can result in damage to your furniture or cause harm to your child. Proper assembly is critical to ensure a safe and comforta-ble end result. Please read all instructions before assembly and keep instructions for future use.

WARNING

• Failure to follow these warnings and the assembly instructions could result in serious injury or death.
• Read all instructions before assembling this product.
• Keep instructions for future use.
• Do not throw away packaging material until assembly is complete.
• Properly discard all packaging materials after assembly is complete.
• This product has many moving parts, serious injury can occur if not used properly. Keep hands, fingers and body parts away from the mechanism. To reduce the risk of head entrapment and other injuries, keep children and pets away from openings and moving parts in and around furniture.
• Proper assembly of this item requires 2 people.
• Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and frequently during use. DO NOT use this product if any
• parts are missing, damaged or broken. Contact Babyletto for replacement parts and instructional literature if needed. DO NOT substitute parts.
  Maximum weight capacity: 300 pounds.

ONE YEAR LIMITED WARRANTY

We will replace any missing parts at the time of pur-chase or any defective item within a one year period from the date of original purchase. An extended war-ranty period of three years is valid only on the elec-tronic controls and electronic mechanisms of this product. Please keep your receipt so that we may pro-cess your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, second-hand or demo models.
This warranty does not cover any damaged or defec-tive parts that result from installation and assembly, normal wear and tear, abuse, negligence, improper use or alteration to the finish, design, and hardware of the product. The specific legal rights of this warranty may vary from state to state. Some states do not allow any exclusion or limitation of incidental damages. Some states do not allow limitation on how long an implied warranty lasts.

Parts List

Assembly Instructions

Step 1

Tips on the Locking Mechanism

1. Make sure the locking mechanism on each metal glide is aligned in the center.
2. Firmly push each side into place one at a time. You should hear a click when the chair back locks into place on each side.

Step 2

Step 3

WARNING

MAKE SURE POWER CABLE IS NOT UNDER THE METAL BASE.
THIS IS A FIRE HAZARD.

Step 4

Step 5

• If chair is not functioning after following these steps, please check the cord underneath the chair is fully plugged in to the chair motor.

CAUTION :
Risk of electric shock.
Dry location use only.
This Class B digital apparatus complies with Canadian ICES-003. This Device Complies with part 15 of the FCC rules.

WARNING :
Operation is subject to the following conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

POWER CORD SAFETY

WARNING:
UNPLUG AND REMOVE POWER CORD FROM THE WALL AND THE POWER
SOCKET AT THE REAR OF THE POWERED RECLINER WHEN NOT IN USE AND
STORE THE CORD OUT OF REACH OF CHILDREN.

DANGER:
To reduce the risk of electric shock:
Always unplug the powered recliner from the electrical outlet before cleaning.

KIWI GLIDER RECLINER WITH ELECTRONIC CONTROL AND USB

Control Panel

• Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-aged to try to correct the interference by one or more of the following measures: –Reorient or relo-cate the receiving antenna. –Increase the separa-tion between the equipment and receiver. — Con-nect the equipment into an outlet on a circuit differ-ent from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.

Tension Adjustment

From Chair to Recliner

The chair can be made to recline by simply pressing the button located at the inside right of the armrest.

From Recliner to Chair

The chair is returned to the upright position by pressing the button located at the inside right of the armrest.

CAUTION :
Do not allow children to play on this mechanized furniture or operate the mecha-nism. Leg rest folds down on closing so that a child could possibly be injured. Always leave in an upright and closed position. Keep hands and feet clear of mechanism. Only the occupant should operate it.

To Disassemble

Registering your product is even easier than before.
You can register your product on our website at :
www.babyletto.com/registrations
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT:
WWW.BABYLETTO.COM/PARTS
OR YOU CAN CONTACT US BY MAIL:
BABYLETTO
8700 REX RD., PICO RIVERA, CA 90660
TEL: 323-282-5163

References

• Replacement Parts – Babyletto
• Registrations – Babyletto

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>