FreedConn GM65921 T-COMVB Original Bluetooth Motorcycle Helmet BT Interphone Headset Instruction Manual
- June 5, 2024
- FreedConn
Table of Contents
FreedConn GM65921 T-COMVB Original Bluetooth Motorcycle Helmet BT
Interphone Headset
Welcome
Thank you for purchasing our FreedConn T-COMVB motorcycle Bluetooth headset,
hope you will enjoy it.
Packing Slip
- pack package
- pack package
For any missing parts, please feel free to contact us, we will ship you replacement parts.
Installation Method
-
Loosen the screws on the back of clamp with the provided screwdriver.
-
Open the lining of the helmet,insert the clamp in the proper position on the left of helmet and fasten the screw (overly fastened screw can damage the clamp)
-
Slide the receiver down into the slots on the headset clamp mount.Make sure that it is locked in securely.
-
Open the lining of helmet (at ear’s position),clean the EPS surface and affix the velcro on with the rough surface.
-
Affix the hook surface of speaker to the rough surface of velcro and properly tidy the helmet lining.
-
Insert the headphone plug into the corresponding headphone jack on the receiver to finish the installation.
Product Details
Functions and Operation Instructions
Basic Operation
Turn on| Press power button for 3 seconds until you hear a beep, blue indicator light flash 3 times swiftly and turn turn
into regular interval.
|
---|---|---
Turn off| Press power button for 5 seconds until you hear a beep, red
indicator light will be on
for a while and then die out.
|
Activate
voice command
| Press twice on the button.|
Clear the pairing memory| Under power off status, press and hold power button
and turn the jog wheel
anti-clockwise meanwhile for
3s.
|
Volume Up| Turn the jog wheel clockwise and hold it, it will beep when reach
max volume.|
Volume Down| Turn the jog wheel
anti-clockwise and hold it, it will beep when reach max volume.
|
Battery Level Checking
Check on phone| Check the battery level on phone after connected.|
---|---|---
Battery level voice prompt| Hear the battery level voice prompt while turn on
the device.|
Phone/ GPS/ MP3 Connection
Step 1| Make sure the device is off status.|
---|---|---
Step 2| Press and hold the power button for 6 seconds, do not release until
blue and red light flash fast, you’ll hear “Pairing”
voice prompt.
|
Step 3| Click “ T-COM” on the Bluetooth setting page of your phone.|
Step 4| You’ll hear “ Connected” voice prompt, blue and red light indicator
change to
blue flash slowly.
|
Phone Call Operations
Answer calls| Press the MFB once|
---|---|---
Reject calls| Press and hold the MFB button for 2s|
End the calls| Press the MFB once|
Last number redial| Press and hold the MFB button for 2s|
Turn on/ off auto answer
calls function
| Turn off device first, press and hold power button & MFB
button meanwhile for 3s
|
Convert the
phone call receiver mode
| Press and hold the MFB button for 2s|
Music Control
Play/ pause music| Press MFB button once|
---|---|---
Previous song| Turn the jog wheel anti-clockwise|
Next song| Turn the jog wheel clockwise|
Switch between music and FM radio| Press the MFB button twice|
FM Radio Function
Turn on/ off FM radio| Press MFB button twice|
---|---|---
Previous channel| Turn the jog wheel anti-clockwise|
Next channel| Turn the jog wheel clockwise|
Play/ pause| Press the MFB button once|
Connect 2 T-COMVB Device
Step 1| Make sure 2 device are off status|
---|---|---
Step 2| Press and hold power button for 6s on both device to enter pairing
mode, blue and red light flash fast, you will hear
“ Pairing” voice prompt
|
Step 3| Press power button on either one of the
device to search the other one, you will hear “ Search” voice prompt
|
Step 4| Wait for a few seconds for the 2 device to connect with each other,
when the indicator light change to blue flash slowly,
you’ll hear “ Connected” voice prompt
|
Bluetooth Intercom Operation
Start Intercom| Follow instruction 5.5 to
connect device A and B, you can talk directly after connected
|
---|---|---
End/ Restart Intercom| Press intercom button once will end intercom, press
again to restart intercom|
Music Sharing Between 2 Bluetooth 5.0 Version T-COMVB
Step 1| Connect device A with your phone|
---|---|---
Step 2| Connect device A and B with each other, and make sure they are not
connected with other T-COMVB
|
Step 3| End the intercom between A and B|
Step 4| Press and hold intercom and MFB button for 2s meanwhile, you will hear
“ Music Sharing” voice
prompt
|
Step 5| Play music on your phone, device A will share the music to device B|
End music
sharing
| Repeat step 4, you will hear “ End of Sharing”|
Warranty
We provide 1 year warranty for any quality problem. Please contact with us
through
[email protected] with your purchase receipt.