FreedConn ‎BM2-S Bluetooth Motorcycle Helmet User Manual

FreedConn ‎BM2-S Bluetooth Motorcycle Helmet

FreedConn BM2-S/ BM12 Bluetooth Helmet
Thank you for purchasing our FreedConn motorcycle helmet with Bluetooth, please read the user manual carefully before first use.
This Bluetooth helmet is well-designed, well-made, and an excellent choice if you want to listen to music on the driveway. Users love the one-button control, which allows them to complete all operations.
Improved ventilation for comfort. Another excellent thing is that the helmet has removable, washable, and absorbent cheek pads, which allows you to change padding directly when the size doesn’t fits well enough. What’s more, FreedConn helmets are DOT-certified, you can connect them easily to your phone, MP3, or GPS with Bluetooth 5.0.

Attention

• No helmet can protect you against all kinds of predictable risks.For your safety, please select the proper size that fits your head before ordering and make sure that you had wear it in the right way before riding. Select the helmet snug and comfortable, and make sure that it is not too large or moves freely, nor too small to constrict or cause pain.
  KIND REMIND: Helmet size depends on the padding,if your helmet does not fit well, CONTACT US with Order ‘D, we will send you bigger or smaller padding as required. Tie the chin strap and make sure the helmet will not depart from you.

• Check the safety strap before you use it.

• Pay attention to the usage of the helmet, don’t mend it or change any accessories by yourself.

• Check the performance of the visor in normal condition, if any visor system is included. Don’t use the visor that exceeds usage.
  If your helmet was bounced in an accident, the performance of protection will be destroyed though it looks good. Please DO NOT using it anymore.
  Safety tip: Wearing a FreedConn helmet headset while riding will reduce the ability of your ears to listen to ambient sounds. Long-term exposure to music at maximum volume, in addiction to temporary adaptation, can lead to a loss of the ability to hear soft sounds or even can lead to permanent hearing damage.
  Tips : In order to get the best sound quality experience, it is recommended that the distance between the headset and your ears to be kept within 2 mm

Maintenance & Cleaning

• After wearing it for some time, we suggest you clean it. The padding is detachable, please take it off and wash it with warm water.
• When assembling the helmet, please avoid any damage carefully to the outside varnish.
• If you’re not using it, please keep it in a dry and cool place
• Please avoid putting the helmet directly under strong sunlight in the non-closed area, such as the back shelf of a motorcycle

Product Functions Introduction

• Radio Function
• Activate Voice Assistant
• Connect with 2 mobile phones
• Voice Prompt
• Phone Talk
• Music playing
• Bluetooth Intercom
• Support to connect with most devices from other Bluetooth brands
• Support to connect with most smartphones, MP3 players, and GPS navigation systems.

Parts List

Bluetooth Receiver Installation Steps

1. Uncover the top cloth on the main engine following the steps in the picture.
2. Put the helmet up side down (to avoid scratching the helmet, please put a piece of cloth under it).
3. 0pen the cover plate of the main engine box along the direction of the arrow in the picture.
4. Take off the cover plate of the main engine.
5. Take out the main engine from the component box.
6. With the pin side down and the charging hole on the left, plug the main engine into the main engine box.
7. Install the main engine properly so that the pins of the main engine are fully contacting the female jack in the main engine box.
8. After installing the main engine, align the pin of the cover plate with the corresponding empty position in the main engine box and press it in.
9. Complete the installation of the main engine cover plate.
10. Open a gap on the left headset, insert the cover cloth into the gap, and close it up.
    Please follow the steps in the pictures to install the main engine: You must install following the direction of the main engine in step 6, or it may influence the use of the device.

Functional Panel Control of the BT receiver

Scan to watch the operation video
FreedConn Helmet Operation Demonstration Video

Basic Operation

Function| Button| Operation| Voice Prompt| LEO Indicator light
---|---|---|---|---
Power on| | Press and hold the on/off| Welcome to use| The blue light flashes
| | button for 3 seconds.| FreedConn| quickly and then
| | | products| flash slowly.
Power off| | Press and hold the| Power off| The red indicator light
 Language

switching

| | on/off button for 5 seconds| | remains on for a moment and then goes off.
In power-off state, press and hold the| Welcome to use FreedConn| The blue light remains on for a moment and
| | multi-function button and| products| then flashes twice.
| | turn it counterclockwise| |
| | for 5 seconds.| |
Turn on/| | In power-off state, double| Turn on automatic|
off| | click the multi-function| answering,
automatic| | button.| Turn off automatic
answering| | | answering
Delete| | In power-off state, press| Power off…clear| When the device is
pairing| | and hold the on/off| up pairing| being turned off, the
history| | button and turn it| | red light will remain on
| | clockwise for 5 seconds.| | for a moment, and
| | | | when the pairing
| | | | history is being
| | | | deleted, the red light
| | | | will flash twice.
Automatic power-off| No operation within 15 minutes after powering on without connecting with a mobile phone will lead to automatic power-off.

Pairing with mobile phones or other Bluetooth devices

| Operation| Voice

Prompt

| LED indicator

light

---|---|---|---
Function| Button
Connection

with mobile phones

|

| In power-off state, press and hold the on/off button for 5 seconds to enter the pairing status.then choose BM2-S from the Bluetooth device to start the connection.| Pairing state: the red light and blue light flash alternately.
Connected: the blue light flashes.| Pairing state:the red light and blue light flash alternately. Connected: the blue light flashes.
Resuming phone connection| In the power-off state, press and hold the on/off button for 3 seconds.| Bluetooth connected| The blue light flashes
Answering

a call

| When a call is coming, shortly Press the multi-function button once.| Call answered| The blue light

flashes

Rejecting a call| When a call is coming, long

Press the multi-function button for 2 seconds and then release it.

| Call rejected|
Ending a

call

| Press the multi-function

button once during a phone call.

| Call hung up| The blue light

flashes

Changing call

answering mode

| Long press the multi-function

button for 3 seconds during a phone call.

| Toot, tick-toot| The red light flashes
Automatic call answering| Note: If there is no operation within 15 seconds, the device will answer the call automatically.| Call answered| The blue light flashes
Activating the voice assistant| | In standby state, press the multi-function button for 3 seconds.| Voice call| The red light flashes
Music playing Music pause| | Step one, turn on the music player on the mobile phone. Step two. click the multi-function button to play the music, and click again to pause the music.| Music playing Music pause| The blue light flashes
Radio on, off| | In the power-off state, click thE multi-function button to turn on the radio mode, and click again to turn off the radio mode.| Radio on

Radio off

|
Function| Button| Operation| Voice Prompt| LEO indicator light
---|---|---|---|---
The| | Shortly rotate the knob| The previous|
previous

music, the

| counterclockwise for one time.| music/ the previous
previous FM

channel

| | channel
Volume| Rotate counterclockwise without| Minimum|
down| releasing| volume with
| | beep prompt
The next| __| Shortly rotate the knob clockwise| The next|
music, the| once.| music/ the
next FM| | next channel
channel| |
Volume up| Shortly rotate the knob

clockwise once.

| Maximum volume with|
| Rotate clockwise without releasing| beep prompt
Switching| | In the music mode.press the| Music playing/|
between| multi.function button twice to| radio on
music and| switch to the FM channel. and press|
radio| twice again to return to the music|
| mode.|

Intercom Operation

Note : The two devices should be paired before starting an intercom call.

Function| Button| Operation| Vo ic e Prompt| LEO indicator light
---|---|---|---|---

Bluetooth intercom pairing between two devices

| | Step 1: In power-off state, press
and hold the on/off buttons of two
devices for 8 seconds and release
when you hear the prompt.At this
moment,they enter the pairing
state.| Pairing
State|

The red and blue
light flashes
alternately.

| Step 2: Press and hold then shortly rotate the knob clockwise once of one of the devices, searching for another device to pair.| Searching for networks| The red and blue

light flashes alternately.

r| Step 3: Pairing completed.(An intercom between two people can be started now.)| Intercom

connected

| The blue light flashes
Note: If pairing fails, please delete the pairing history in the devices and repeat the above operations.
Disconnect- the intercom| !Device A or B (Press and hold then shortly rotate the knob once of one of the devices)| Intercom disconnected
Resuming| Intercom
intercom| connected

Note : The priority order of the functions during the use of the product is: “Phone call>Intercom> Music playing> GPS> FM.

How to pair with 3rd party intercom headsets?

In the power-off state, press and hold the multi-function button for 5 seconds to enter the pairing mode, and double-click the multi-function button to enter the 3rd party pairing mode. When the red and blue lights flash, press and hold the knob button then rotate the knob clockwise once to connect with a 3rd party branded headset. Note: The 3rd party branded headset needs to enter the Bluetooth pairing mode according to its operation manual

Technical Parameters

• Bluetooth Version: 5.0
• Frequency : 2.4GHZ
• Weight : 1709 grams
• Intercom Time: 14 hours
• Phone Call Time : 14 hours
• Music Playing Time: 13 hours
• Adaptor: 5V IA
• Battery Type: Rechargeable lithium polymer battery
• Battery Material : Lithium-ion polymer
• Battery PN : 453046
• Capacity : 600 mAh
• voltage : 3.7V
• Power : 2.22 wh
• Standby Time: 1 month (Automatically turn off if no operation or connection within 15 minutes)

Charging and Maintenance

1. Please fully charge the Bluetooth device before using it.
2. To extend the service life of the build-in polymer battery, please charge the device at least once a month
3. If the red light is off during charging, it could be due to low voltage. It’s better to continue charging it for another 0.5 to 1 hour, then check again if the Bluetooth receiver is successfully charged. If it still fails to charge, please change the charger and try again
4. Please keep the product away from environments with extensive high (or low) temperature, the best storage environmental temperature is between minus 40 to 60 degrees, or the service life of the product will be shortened.
5. Stay away from fire
6. Stay away from sharp objects,or the product may be scratched or damaged
7. Do not attempt to disassemble the headset.
8. If you do not use the headset for a long time, put it in a dry environment and charge it once a month to ensure its performance.

Tips and Troubleshooting

1. Please try again to delete the pairing history in the headset, then restart the headset to enter the pairing state. There may be too many Bluetooth pairing records in the mobile phone. You need to delete the pairing records in the mobile phone, restart the phone and try to pair again.
2. The two headsets can not be paired well: Delete the pairing history and restart to enter the pairing state, then try again.
3. While listening to the music, if one of the headsets or the other intercom device is mute,re-plug the earphones and microphone, and make sure the connection is good.
4. In downstate: Plug in the charging wire to charge the main engine, and then the headset can be restarted.
5. The sound quality turns poor during intercom could be caused by signal interruption. Please disconnect the intercom and try again.
6. If the music is stuck or doesn’t play, there may be other applications hogging the audio channel in the background of the phone. Check if other applications are running in the background and close them.

Bluetooth Intercom System

Model Number: BM12 & BM2-S
Warranty Card
Please keep your purchase receipt together with your warranty card & the warranty void removed.
Name:
Address:
Tel:
After-sale Service: winzon.cs@outlook.com
Facebook : @FreedConnMotorcycle
Fault Description
Please attach a copy of the receipt to the warranty card to prove the date of purchase.lf any quality issues when using it, please CONTACT our After-Sale Service first to resolve.
Please make sure that you have described the problem clearly on ue wanany card, so that we can handle it for you in time. If possible, you can also send us an image or video to our email: winzon.cs@outlook.com.

FAQs

Q: Can I make phone calls while riding with the FreedConn ‎BM2-S helmet?

A: Yes, you can make and receive phone calls hands-free using the helmet's Bluetooth system.

Q: How long does the battery last on the FreedConn ‎BM2-S helmet?

A: The battery life varies depending on usage but typically lasts for around 8-10 hours of talk time or music playback on a full charge.

Q: Does the FreedConn ‎BM2-S helmet have a built-in radio?

A: Yes, it has an integrated FM radio, allowing you to listen to your favorite stations on the go.

Q: How do I control the FreedConn ‎BM2-S helmet's Bluetooth functions?

A: The helmet has easy-to-access buttons for controlling functions like answering calls, adjusting volume, and changing tracks.

Q: Is the FreedConn ‎BM2-S helmet available in different sizes and colors?

A: Yes, it comes in various sizes to ensure a comfortable fit, and you can choose from different color options to suit your style and preferences.

Q: Is the FreedConn ‎BM2-S helmet safe and durable?

A: Yes, it meets safety standards and is designed to protect while offering additional convenience through its Bluetooth features.

Q: Can I listen to music while wearing the FreedConn ‎BM2-S helmet?

A: Yes, you can stream music from your paired device to the helmet's built-in speakers.

Q: What is the range of the intercom communication on the FreedConn ‎BM2-S helmet?

A: The intercom range of the FreedConn ‎BM2-S helmet is typically around 500 meters (approximately 1640 feet), depending on environmental factors.

Q: Is the FreedConn ‎BM2-S helmet compatible with all Bluetooth devices?

A: It is designed to be compatible with most Bluetooth-enabled devices, including smartphones, GPS systems, and music players.

Q: What are the key features of the FreedConn ‎BM2-S helmet?

A: The FreedConn ‎BM2-S helmet features Bluetooth 3.0 technology, built-in speakers, a noise-canceling microphone, FM radio, and supports intercom communication with other riders.

Q: How does the FreedConn ‎BM2-S helmet's Bluetooth system work?

A: The FreedConn ‎BM2-S helmet is equipped with a Bluetooth module that allows riders to connect to their smartphones and other Bluetooth devices for hands- free communication and audio streaming.

Q: What is the FreedConn ‎BM2-S Bluetooth Motorcycle Helmet?

A: The FreedConn ‎BM2-S Bluetooth Motorcycle Helmet is a motorcycle helmet with built-in Bluetooth communication capabilities.

Video-How to remove the liner and visor of BM2-S Bluetooth Helmet?

Download This Manual PDF:FreedConn ‎BM2-S Bluetooth Motorcycle Helmet User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>