FreedConn BL06.0050.0665 R3 Motorcycle Bluetooth Headset with 2K Camera Instruction Manual

FreedConn BL06.0050.0665 R3 Motorcycle Bluetooth Headset with 2K Camera

Welcome

• Thank you for choosing FreedConn Helmet Bluetooth® Intercom system. By doing so you now have the assurance and peace of mind that comes with purchasing a product made by one of the leading manufacturers. All products brought to you are manufactured to the highest standard of performance and safety and,as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 2 Year Warranty. We hope you will enjoy using your purchase for many years to come.
• Safety Warning: Keep in mind that using FreedConn can limit the audibility of ambient sounds. Listening to music at maximum volume in addition to temporarily adapting to make it impossible to hear soft sounds can lead to permanent hearing damage. Warm Tips: In order to get the best sound quality experience, please make sure Speakers are within 2mm of ears.

Product Functions Introduction

• Video recording function
• Photo capturing function
• WiFi function
• Radio function
• Activate voice assistant
• Connect two mobile phones
• Voice prompts
• Bluetooth intercom
• Music sharing
• Supports connection with most other Bluetooth intercom brands
• Supports connection with most smart phones, MP3 players and GPS navigation system
• Supports TF cards with a maximum capacity of 256GB

List of Packing Parts

Product Assembly and Disassembly Steps

Assembly steps

1. Insert the memory card into the slot at the bottom of the host.
2. Loosen the clamp by turning the screw counterclockwise.
3. Open the inner lining on the left side of the helmet,insert the clamp into the appropriate position between the left EPS and the shell,and tighten the screw.Note: if the screw is too tight, the clamp may be broken.)

4. Align the R3 host with the card slot and install it on the base.
5. Stick the earphone Velcro on the surface of EPS at the position of the ear.
6. Attach the speaker to the Velcro tape.

7. Remove the triangle scrap from the microphone.
8. Stick the microphone on EPS inside the helmet or the shell just at the mouth position.
9. Insert the earphone plug into the jack on the R3.

10. The horizontal rotation angle of the lens can be fine-tuned by 30 degrees.
11. 360 degrees adjustable rotation of the body.

Disassembly Steps

• Push the machine upward from the bottom
• Losen the screw and remove the clip

Function Keys Introduction

1. Volume up/ the next song
2. Volume down/ the last song
3. WiFi button
4. Lens
5. Recorder ON/OFF, Video/Photo button
6. LED indicator light
7. Bluetooth ON/OFF, Intercom button
8. Multi-function button
9. Reset button
10. TF card slot
11. Microphone
12. Headphone port
13. Charging port /USB port

Bluetooth Functions Operating Introduction

Basic Functions Operation

Bluetooth Pairing with Different Devices
Tip：Make sure the distance between R3 and the Bluetooth device waiting for pairing is within 1 meter visible range.

Phone Calls, Music and Radio Operation
Tip: make sure that R3 has been connected to the mobile phone

Intercom Operation between Two R3 devices

Note:

1. If there is an incoming call during intercom, the device will disconnect the intercom automatically, and resume the intercom state after hanging up the phone call.
2. If a partner user sends an invitation for intercom to you while you are in a phone call, you will not be able to accept the invitation, but there will be a “beep” prompt.

Music Sharing

1. Make sure that both devices only keep the pairing information of each other (You can clear up all the pairing history of both devices and pair them once again)
2. Follow the methods of pairing with mobile phone in point 2 of Five above to complete the pairing between the Bluetooth and mobile phone.
3. After completing the above procedures, when A needs to share music with B, and if both A and B are playing music, B has to pause the music. Then double click the intercom key of either A or B, and both devices can listen to the music from A. During music sharing, press the multi-function key of A to pause the music, press the multi-function key of B to exit music sharing, or press the intercom key of either A or B to exist the sharing.
   (Note: If the sharing is not successful, please clear the pairing history first and then repeat the steps above.)

Intercom Connection among 6 devices and Using Methods
Note: The first user and the last user (as below A and F) can not pair with each other

Operation of Camera Functions

Tips:

1. If the memory card is not inserted, you will hear the prompt “Please insert the memory card”.
2. If the video cannot be recorded after inserting the card, please format the TF card in the APP (Refer to “No. 7” for the methods).
3. When the memory card capacity is insufficient, the newly recorded video will automatically replace the first video stored in the memory card. In case the video cannot be recycled when the card is full, delete 3-5 videos, then the video can be recycled automatically. When the card is full, the video may be suspended automatically, and the video will be automatically started after the recycled videos are deleted.

TF Memory Card Formatting

1. Format the memory card via the APP in the mobile phone preferentially following the below operation methods:

   • Step 1: Press the video switch key to start the video taking function of R3.
   • Step 2: Press the WiFi key for 3 seconds to turn on the WiFi
   • Step 3: Choose “FreedConn”in the WiFi list of the mobile phone
   • Step 4: Turn on the APP and click to enter video taking state after R3 connecting to WiFi successfully.
   • Step 5: Click the icon at the upper right corner → Format the device”/(click sound represents “formatting”).
     (Note: In case of any abnormal operations, you can use a computer to format it instead)

2. Support maximum 256G memory card

WIFI Functions Introduction

Tips:

1. Please make sure the camera DVR is on status before turning on the WiFi.
2. The built-in WIFI function of R3 Pro is only used for the users to download videos in the APP or preview the videos online temporarily.
3. Due to limited body size and over- intensive processors, using the WIFI and the Bluetooth at the same time will cause signal interference,Please turn off the WIFI when you don’t need to preview or download any videos.
4. During the connection, if the mobile phone indicates “The current WLAN cannot access to the internet, continue to use this WLAN or not?”, you must choose “yes”.
5. If the message “Network access denied” is displayed when you connect to the WIFI again, please turn off the recorder WIFI and restart it, refresh the WIFI list of your mobile phone and reconnect.

Introduction of Video Application Usage

Tips:

• The video recording function of R3 does not need to rely on the APP to use.
• The APP is only used for online preview or to download the videos recorded by R3 to the mobile phone. The functions of the APP itself do not represent the functions of R3, the specific situation shall prevail;
• The following recommended APP is a public version produced by a third-party company and it is not FreedConn’s product. The third party reserves the right of interpretation. Issues about after-sales of the APP or about compatibility between the APP and mobile phone are not covered by FreedConn’s after-sales guaranteed area.
• The recommended APP is compatible with most mobile phones. If you cannot use the relevant functions normally after downloading the APP, please watch and process the recorded videos on the computer according to the 3 methods described in below.

1. **Use a mobile phone to scan the below QR code to download “Roadcam”or ”KaKa”APP to the mobile phone (Below introduction is for RoadCam)：

**

2. **Roadcam ”APP interface introduction and operation

Note:** The play option is only in the preview mode, so videos and photos will be vague and soundless. You need to download if you want to watch high- definition ones. The downloaded videos and pictures can also be reviewed or deleted in the “photo album” as shown at the bottom of pic. 1. You can also use a USB cable to connect the USB port of the recorder at one end, and connect a computer at the other end. (You can also pull out the memory card and put it in a card reader which then connect to the computer). Find the USB flash drive in “my computer” and open the videos or picture files inside to play in HD (The disk can only be read when the recorder is turned on).

3. APP setting interface introduction
   • WiFi name： You can customize the WiFi name
   • WiFi connecting password： The password can be changed via this item, and the new password will take effect after the recorder is restarted. (Notes：The WiFi password must include 8 digits，if the new password is fewer than 8 digits or the password is forgotten, then you won’t be able to connect to the WIFI. Then you need to long press the WIFI key of the recorder to restore factory setting, so it is not recommended to change the password unless necessary. When you change the password of the recorder without changing the WiFi name, please ignore the original network and reconnect with the new password, otherwise the mobile phone will still use the old password to connect to this WiFi.
   • Recording: Click to choose to turn on or turn off the audio while taking videos. If you think the video environment is too noisy, then you can turn off the audio of the video.
   • Video time watermark: Click to turn on or turn off the time watermark of the videos.
   • Recycled recording time: Click to choose the recording time of a single video from the options “off, 1 minute, 2 minutes, 3 minutes, 5 minutes and 10 minutes. Choosing the “off” option means the default recording time of a single video is 5 minutes.
   • Video quality: Click to change the definition of video recording.
   • Exposure compensation: Click to change the exposure rate of the lens.
   • Format the device : Click to format the TF card.
   • Restore factory Settings: Click to restore the factory settings of the APP.

Product specifications and Parameters

• Frequency: 2.4 GHz

• Weight: 95gram

• Dimension: 108 x58 x31mm

• Power Adaptor: DC 5V/1A

• Lens: 400W pixels wide Angle

• Battery Capacity: 2000 mAh
  (When the recorder’s power low, there will be a prompt to indicate “Battery low, please charge, DV power off”; When the recorder is off due to low battery, you can still listen to music for 40 minutes by Bluetooth, which will report low battery every 15 minutes, and when the battery is too low, the

• Phone Call Duration: 33 hours

• Video Taking Time: 7-8 hours

• Charging Time: About 3 hours

• Standby Time: Standby for 15 minutes without Bluetooth connection or operation, then it will automatically turn off.

• Music Playing Time: About 42 hours

About Charging and Maintenance

1. Before using the Bluetooth device, fully charge it.
2. To extend the life of the built-in polymer battery, please charge the device at least once a month.
3. If the red light goes off while charging, the voltage may be too low. It is best to charge it for 3 hours and then recheck if the Bluetooth receiver has been successfully charged.
4. Please don’t put the product in en environment with too high (or too low). temperature. The best storage environment temperature is-4 to 60 degrees, otherwise the life of the product will be shortened.
5. Stay away from fire.
6. Keep away from sharp objects, which may cause scratches or damage to the product.
7. Don’t attempt to disassemble the headset.
8. Please put the headset in a dry environment when it is not used for a long time, and make sure to charge it once a month o guarantee its performance. Charging reminder:
9. It can only be charged normally through the original charging cable of the product with the charger plug and not through computer or other ways.
10. Non-original charging cable will lead to abnormal production functions, so please avoid using it to charge the device.

Trouble Shooting

1. Bluetooth is off
   In the case that the recorder can be turned on but the Bluetooth can not, it is normally because the Bluetooth failed to reset during shutdown. Now press the reset key on the device for over 3 seconds, then it can reset successfully. Plugging in the charger to reset is also applicable.

2. The recorder can not be turned on
   If the recorder can not be turned on when it is with sufficient battery capacity, it is usually because the recorder is not reset successfully when it was shut down. At this time, you only need to press the reset key on the device for about 1 second, then it is reset successfully. You can also plug in the charger to reset it. (Charging while the recorder is on will not make it reset.)

3. There is a lag of music playing while checking videos in the application.

   • While you are checking videos in the application, the video code stream is too large, so it will interfere with The Bluetooth. You need to turn off the Bluetooth temporarily.
   • You can turn on the Bluetooth after exiting the APP.

4. There is a “crackling”noise when the phone is playing videos
   Turn off the 4G traffic and WIFI before playing the videos downloaded via the APP for the first time, then the “cracking ”noise will not appear again.

5. When the music playing operation does not respond properly
   Solutions：

6. Try to use the built-in player in the mobile phone.

7. Try to exit or turn off the other running audio players.

8. When listening to audios from Wechat or Tik Tok, the APP is mute or has other abnormal situations.
   Please turn off the audio player running on the backstage and re-enter to listen.

9. When the WiFi is on, the mobile phone can not find the Freedconn network? Or the Freedconn WiFi can be found but can not be connected?
   Your mobile phone may not be compatible with the WiFi software version, and you need to upgrade the WiFi software of R3. To solve this problem, please contact the manufacturer for upgrading by emailing the after-sales service or through the WeChat public account.

10. The TF card still can not be used normally after trying many ways to format it?

    • Suggest that you choose a high speed card Class 10 or above, an authorized edition memory card with 64G capacity. High-quality TF cards have longer service life than low-quality ones.
    • If the video screen is blurred and the frame rate decreases, replace the card with a new one.
    • The higher the quality of TF cards, the longer they will last. And vice versa.

11. The lens is covered with fog or water droplets?
    It is caused by the temperature difference between internal and external of the body, and they will volatilize naturally after placing aside for a period of time.

After-sales Service

If you encounter other problems during the use of the product, you can scan the following QR code to enter the technical support page of the official website to find the corresponding solution.

Warranty Card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>