FreedConn BM12 Bluetooth Motorcycle Helmet User Manual
- June 16, 2024
- FreedConn
Table of Contents
FreedConn BM12 Bluetooth Motorcycle Helmet
FreedConn BM2-S/ BM12 Bluetooth Helmet
- Thank you for purchase our FreedConn motorcycle helmet with Bluetooth,please read the user manual carefully before first use.
- This Bluetooth helmet is well-designed, well-made and an excellent choice if you want to listen to music on the driveway. Users love the one-button control, which allows them to complete all operations.
- Improved ventilation for comfort. Another excellent thing is that the helme thas removable, washable and absorbent cheek pads, which allows you tochange padding directly when size doesn’t fits well enough.What’s more,FreedConn helmets are DOT certified, you can connect them easily to yourphone,MP3 or GPS system with Bluetooth 5.0.
Attention
- In fact, no helmet can protect you against all kinds of predictable risks.For your own safety, please select the proper size which fits your head beforeorder and make sure that you had wear it in a right way before riding. Selectthe helmet snug and comfortable, make sure that it is not too large or movesfreely, nor too small to constricts or cause pain. KIND REMIND: Helmet sizeis depend on the padding.if your helmet does not fits well, CONTACT US with Order ID, we will send you bigger or smaller padding as required. Tie the chin strap and make sure the helmet will not depart from you.
- Check the safety strap before you use it.
- Pay attention to the usage of the helmet, don’t mend it or change vany accessories by yourself.
- Check the performance of visor in normal condition, if any visor system included. Don’t use the visor that exceeds usage.
- If your helmet was bounced in an accident, the performance of protective will be destroyed though it looks good.Please DO NOT using it anymore.
Safety tip : Wearing FreedConn helmet headset while riding will reduce the ability of your ears to listen to the ambient sounds. Long-term exposure to music at maximum volume, in addiction to temporary adaptation, can lead to a loss of the ability to hear soft sounds or even can lead to permanent hearing damage.
Tips : In order to get the best sound quality experience, it is recommended that the distance between the headset and your ears to be kept within 2 mm .
Maintenance & Cleaning
- After wearing for some time, we suggest you to clean it.The padding isdetachable, please take it off and wash it with warm water.
- When assemble the helmet, please avoid any damage carefully to theoutside varnish.
- If you’re not using it, please keep it in a dry and cool place.
- Please avoid to put the helmet directly under strong sunlight in non-closed area, such as back shelf of a motorcycle
Product Functions Introduction
- Radio Function
- Activate Voice Assistant
- Connect with 2 mobile phones
- Voice Prompt
- Phone Talk
- Music playing
- Bluetooth Intercom
- Support to connect with most devices from other Bluetooth brands
- Support to connect with most smart phones, MP3 players and GPS navigation systems.
Parts List
Bluetooh Receiver Installation Steps
-
Uncover the top cloth on the main engine following the steps in the picture.
-
Put the helmet up side down (to avoid scratching the helmet, please put a piece of cloth under it).
-
0pen the cover plate of the main engine box along the direction of the arrow in the picture.
-
Take off the cover plate of the main engine.
-
Take out the main engine from the component box.
-
With the pin side down and the charging hole on the left, plug the main engine to the main engine box.
-
Install the main engine properly so that the pins of the main engine are fully contacting the female jack in the main engine box.
-
After installing the main engine, align the pin of the cover plate with the corresponding empty position in the main engine box and press it in.
-
Complete the installation of the main engine cover plate.
-
Open a gap on the left headset, insert the cover cloth into the gap and close it up.
Please follow the steps in the pictures to install the main engine: You must install following thedirection of the main engine in step 6, or it may influence the use of the device.
Functional Panel Control of the BT receiver
FreedConn Helmet Operation Demonstration Video
Basic Operation
Function| Button| Operation| Voice Prompt| LED Indicator
light
---|---|---|---|---
Power on
Power off
�
Language
switching
�
off
automatic answering
Delete pairing history
| | Press and hold the on/off button for 3 seconds.| Welcome to use FreedConn products| The blue light flashes quickly and then flashes slowly.
i
| Press and hold the on/off button for 5 seconds|
Power off| The red indicator light remains on for a
moment and then goes off.
, tl| In power-off state, press and hold the
multi-function button and turn it counterclockwise for 5 seconds.
| Welcome to use FreedConn products| The blue
light remains on for a moment and then flashes twice.
| In power-off state, double click the multi-function
button.| Tum on automatic answering,
Tum off automatic answering
|
| In power off state, press and hold the on/off button and turn it
clockwise for 5 seconds.| Power off…clear up pairing| When
the device is
being turned off, the red light will remain on for a moment, and when the pairing history is being deleted, the red light will flash twice.
Automatic power- off| No operation within 15 minutes after power on without connecting with a mobile phone will lead to automatic power- off.
Pairing with mobile phones or other Bluetooth devices
| Operation| Voice
Prompt
| LED indicator
light
---|---|---|---
Function| Button
Connection
with mobile phones
| ****
0
| In power-off state, press and
hold the on/off button for 5 seconds to enter the pairing status.then choose BM2-S from the Bluetooth device to start the connection.
| Pairing state:the
red light and blue light flash alternately.
Connected:the blue light flashes.
| Pairing state:the
red light and blue light flash alternately.
Connected:the blue light flashes.
Resuming phone connection| In power-off state, press and hold the on/off
button for 3 seconds.| Bluetooth connected| The blue light flashes
Answering
a call
| When a call is coming, shortly
press the multi-function button once.
| Call answered| The blue light
flashes
Rejecting a
call
| When a call is coming, long
press the multi-function button
for 2 seconds and then release it.
| Call rejected|
Ending a
call
| Press the multi-function
button once during a phone call.
| Call hung up| The blue light
flashes
Changing call
answering mode
| Long press the multi-function
button for 3 seconds during a phone call.
| Toot, tick-toot| The red light flashes
Automatic call answering| Note: If there is no operation within 15 seconds,
the device will answer the call automatically.| Call answered| The blue light
flashes
Activating the voice assistant| | In standby state, press the multi-function
button for 3 seconds.| Voice call| The red light flashes
Music playing Music pause| | Step one,turn on the music player in the mobile
phone.Step two.click the multi-function button to play the music, and click
again to
pause the music.
| Music playing Music pause| The blue light flashes
Radio on, off| | In power-off state, click the
multi-function button to turn on the radio mode, and click again to turn off the radio mode.
| Radio on
Radio off
|
Function| Button| Operation| Voice
Prompt
| LEO indicator
light
---|---|---|---|---
The| | | |
| |
| | channel
Volume| Rotate counterclockwise without| Minimum|
down| releasing| volume with
| | beep prompt
The next| | Shortly rotate the knob clockwise| The next|
music, the| once.| music/ the
next FM| | next channel
channel| |
Volume up| Shortly rotate the knob
clockwise once.
| Maximum volume with|
| Rotate clockwise without releasing| beep prompt
Switching| | In the music mode.press the| Music playing/|
between| multi.function button twice to| radio on
music and| switch to FM channel.and press|
radio| twice again to return to the music|
| mode.|
lntercom Operation
Note : The two devices should be paired before starting an intercom call.
Function| Button| Operation| Vo ic e Prompt|
LEO indicator light
---|---|---|---|---
Bluetooth intercom pairing between two devices
| 0| Step 1: In power-off state, press
and hold the on/off buttons of two devices for 8 seconds and release when you hear the prompt.Al this moment.they enter the pairing state.
| Pairing
State
| The red and blue
light flashes alternately.
C| Step 2: Press and hold then
shortly rotate the knob clockwise once of one of the devices, searching for another device to pair.
| Searching
for networks
| The red and blue
light flashes alternately.
r| Step 3: Pairing completed.
(Intercom between two people can be started now.)
| Intercom
connected
| The blue light flashes
Note: If pairing fails,please delete the pairing history in the devices and
repeat the above operations.
Disconnect- ing intercom| ! Device A or B (Press and hold then shortly rotate
the knob once of one of the devices)| Intercom
disconnecte
Resuming| Intercom
intercom| connected
Note : The priority order of the functions during the use of the product is: “Phone call> Intercom> Music playing> GPS> FM.
How to pair with 3rd party intercom headsets?
- In power-off state, press and hold the multi-function button for 5 seconds to enter the pairing mode, and double click the multi-function button to enter the 3rd party pairing mode. When the red and blue lights flash, press and hold the knob button then rotate the knob clockwise once to connect with a 3rd party branded headset. Note: The 3rd party branded headset needs to enter the Bluetooth pairing mode according to its operation manual.
Technical Parameters
- Bluetooth Version : 5.0 Battery Type : Rechargeable lithium polymer battery
- Frequency: 2.4GHZ Battery Material : Lithium ion polymer
- Weight: 1709 grams Battery PN: 453046
- Intercom Time : 14 hours Capacity: 600 mAh
- Phone Call Time : 14 hours Voltage : 3. N
- Music Playing Time : 13 hours Power: 2.22 wh
- Adaptor : SV lA
- Standby Time : 1 month (Automatically turn off if no operation or connection within 15 minutes)
Charging and Maintenance
- Please fully charge the Bluetooth device before using it.
- To extend the service life of the build-in polymer battery, please charge the device at least once a month.
- If the red light is off during charging, it could be due to low voltage. It’s better to continue charging it for another 0.5 to 1 hour, then check again if the Bluetooth receiver is successfully charged. If it still fails to charge, please change the charger and try again.
- Please keep the product away from environment with extensive high (or low) temperature, the best storage environmental temperature is between minus 40 to 60 degrees , or the service life of the product will be shortened.
- Stay away from fire.
- Stay away from sharp objects.or the product may be scratched or damaged.
- Do not attempt to disassemble the headset.
- If you do not use the headset for a long time, put it in a dry environment and charge it once a month to ensure its performance.
Tips and Troubleshooting
- Please try again to delete the pairing history in the headset, then restart the headset to enter the pairing state. It is possible that there are too many Bluetooth pairing records in the mobile phone. You need to delete the pairing records in the mobile phone, restart the phone and try to pair again.
- The two headsets can not be paired well: Delete the pairing history and restart to enter the pairing state, then try again.
- While listening to the music, one of the headset or the other intercom device is mute,re-plug the earphone and microphone, and make sure the connection is good.
- In down state: Plug in the charging wire to charge the main engine, then the headset can be restarted.
- The sound quality turns poor during intercom could be caused by signal interruption. Please disconnect the intercom and try again.
- lf the music is stuck or doesn’t play, there may be other applications hogging the audio channel in the background of the phone. Check if other applications are running in the background and close them.
Bluetooth Intercom System
Model Number : BM12 & BM2-S
Warranty Card
Please keep your purchase receipt together with your warranty card & warranty void ifremoved.
Name :……………………..
Address :…………………….
Tel :……………………………..
After-sale Service : winzon.cs@outlook.com
Facebook : @FreedConnMotorcycle
Fault Description
Please attach a copy of the receipt to the warranty card to prove the date of purchase.If any 1 quality issues when using it, please CONTACT with our After- Sale Service first to resolve. 1 Please make sure that you had described the problem deary on ue wananycard, so that we can handle it for you in time. If possible, you can also send us image or video to our email: w1nzon.cs@outlook.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>