epomaker Everglide Lite 75 DIY Kit User Manual
- June 5, 2024
- EPOMAKER
Table of Contents
epomaker Everglide Lite 75 DIY Kit
SHORT CUTS
- FN + F1 My Computer
- FN + F2 Home Page
- FN + F3 Calculator
- FN + F4 Player
- FN + F5 Previous Track
- FN + F6 Next Track
- Fn + F7 Play/Pause
- FN + F8 Pause
- FN + F9 Mute
- FN + F10 Volume –
- FN + F11 Volume +
- FN + F12 Mailbox
- PRESS KNOB
- FN+WIN-L
- FN+ESC (HOLDING
- FOR 3S)
- Play/Pause
- Win lock
- Reset the keyboard
BACKLIGHT SETTINGS
- FN+DEL Backlight on/off
- FN + Backlight Brightness +
- FN + Backlight Brightness –
- FN + Change backlight direction
- FN + Change Backlight Color
- FN+CTRL-R Toggle underflow lights
- FN+ =+ Backlight speed +
- FN+ -_ Backlight speed –
- FN+INS Toggle RGB effects
- FN+SPACEBAR Toggle RGB lights
CONNECTION
- FN+1! Bluetooth 5.0 Device 1
- FN+2@ Bluetooth 5.0 Device 2
- FN+3# Bluetooth 5.0 Device 3
CHANGE RGB EFFECTS
Pressing Fn+INS to switch the RGB effect of your Everglide 75% keyboard kit.
PAIRING BLUETOOTH
Turn on the switch on the back of the keyboard to make sure that the keyboard
is under the
wireless mode:
Holding Fn+1/2/3 for 3-5 seconds till the backlight flashes fast, the keyboard
is ready to pair. Press Fn+1/2/3 to toggle between the bluetooth devices
1/2/3.
PAIRING WIRELESS 2 .4 GHz
Switch to the 2.4G mode at the back of the keyboard. Insert the USB dongle, the connection will be completed.
PRODUCT SPECIFICATIONS
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switches
Before installing switches, be sure the pins are clean and straight
.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process. Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts. https://discord.gg/2q3Z7C2 https://www.reddit.com/user/epomaker/
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper
functionality of your purchase. It doesn’t cover any damage that may occur
from normal wear and tear. If your product is defective we will send you a
replacement unit. Replacement units might require you to send the defective
unit back to Epomaker. We provide a 1 year warranty for our products when
bought from our website (EPOMAKER.com). Your item will not be covered by your
1 year warranty if the inspection shows any sign of modification or changes
unsupported by the original product, these include: Changing internal
components, Assembling and reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do
not have a warranty with us if you bought the item from another reseller or
likewise. Please contact the store that you bought your product from to
resolve issues
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road,
Xili Street, Nanshan District, Shenzhen, Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com
APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD
CORK, T23 AT2P, IRELAND
Contact: Wells
Tel: +353212066339
Email: info@apex-ce.com
References
- ce.com
- Epomaker
- Epomaker
- DIY Guide: How to Replace Your Mechanical Keyboard Switches
- Reddit - Dive into anything
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>