SOLIGHT WO757-1 LED Light Panel Instruction Manual

June 5, 2024
Solight

SOLIGHT WO757-1 LED Light

installation

SOLIGHT WO757-1 LED Light Panel-1 SOLIGHT
WO757-1 LED Light Panel-2

  1. Turn off the power supply
  2. Remove the bracket and use it as a template for marking holes
  3. Drill the holes and insert plastic anchors
  4. Mount the bracket to the ceiling
  5. Connect the power supply cable to the terminal block
  6. Mount the light onto the bracket and tighten the screws
  7. Turn on the power supply
    Note: The images are for illustrative purposes only. Depending on the model, the shape of the luminaire may change.

The manufacturer is not responsible for any damage caused by improper use.

Controls

SOLIGHT WO757-1 LED Light Panel-3

  1. LED indicator
  2. Turn on
  3. Turn off
  4. Brightness +
  5. Color temperature change
  6. Color temperature change
  7. Brightness
  8. Pairing –
  9. Color temperature preset (6500 K)

Buttons 4 – 7 can be pressed shortly (step change) or pressed and hold (smooth change). Press 9 or 10 to switch between the presets modes – cold white, warm white. Press 11 to switch to 50% or 100% power and neutral white color. Press 13 to switch to night mode – lowest brightness level, neutral light temperature.

PAIRING

  1. Turn off the light for more than 1O seconds.
  2. Switch on the light and within 1O seconds briefly press the button number 8.
  3. The light flashes slowly confirming successful pairing.
    Note: A controller can be paired with multiple lights, but multiple controllers cannot be paired with a single light. Only the last paired controller will work.

Memory function

Memory function for wall switch control: LED lighting allows you to switch preset modes with a wall switch. You can change the modes by switching the light on and off within a time delay of 0.5 – 2 s. lf you leave longer delay after turning the light off, the light will then come on in the last mode used.
Memory function for remote control: After switching on, the light returns to the last used mode by the remote control only if the mode is active and the light is switched on for more than 15 s.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals