VICTOR VC-816B Digital Anemometer Instruction Manual
- June 3, 2024
- VICTOR
Table of Contents
VICTOR VC-816B Digital Anemometer
FUNCTION
- Air Velocity & Temperature measurement
- Max/Min/Average/Current reading
- CI’F temperature unit selection
- Five units of air velocity: M/s, Km/h, ft/min, Knots, mph
- Data Hold
- LCD backlight display
- Manual/Auto power shut off
- Beaufort Scale indication
- Wind chill indication
- Low battery indication
LCD DISPLAY
Operation
-
Prepare before measurement:
Open the battery door and put one 9V battery into the compartment correctly. Then close the battery door; Connect the vane’s cable to the main unit. -
Turn on:
Press to turn on the unit. LCD blink a full display one second then display current air velocity and temperature; Backlight will be activated at the same time. -
Set up unit of air velocity:
Press unit then “m/s” indication blinks. Press (A)can switch the five units: m/s, km/h, ft/min, knots and mph. Press unit again to confirm the unit. -
Set up unit of temperature
Press CF LED to switch temperature unit: ‘C/F -
Data hold:
Press o to lock the current air velocity. Press it again can go back the normal measuring mode -
Set up backlight
Press CF LED button for 2 seconds to turn on the backlight. Press it again for 2 seconds to turn off the backlight. Z. -
Max/Min/Avg/Current air velocity measure
When power on and the vane spins, LCD display current air velocity. Press button again and again can switch to MAX reading, MIN reading, AVG reading and go back to current reading -
Turn off:
Press button to turn off the unit. The unit will turn off automatically without any operation in one minute.