Bluestone TWS25 Flex Wireless Earbuds User Manual
- June 5, 2024
- Bluestone
Table of Contents
Bluestone TWS25 Flex Wireless Earbuds
INTRODUCTION
Do you like ear hooks? But not always maybe? Well no worries!
Bluestone has the perfect solution for you. Flex. It has flexible ear hooks
that are soft and rubbery that fit right to your ears. But not only are they
super flexible, but theyre detachable. Wow!
Take them off when you want, and put them back on when you do. However you
chose to wear them, is up to you. There is no right and wrong way. The only
wrong thing would be not to purchase these headphones.
PACKAGE CONTENTS
- 2x Individual Earbuds
- 1 x Charging Case
- 1 x Charging Cable
- 4x Silicone Earbud tips
PRODUCT OVERVIEW
SPECIFICATIONS & FEATURES
- Flexible Ear Hooks
- Bluetooth v 5.0
- Noise Isolating
- Up to 60 Foot Range
- Up to 3 Hours of Continuous Play
- Pre-Paired Technology
- Anti-Interference Transmitter
- Ergonomic Fit
- High Capacity Charging Case
HOW TO USE
Charging Case:
- Connect the Micro USB end of the provided Charging Cable into the Micro USB Port of the Charging Case.
- Connect the USB end of the USB Cable into any USB Charging Port.
- While charging the Charging Case Indicator Lights will blink.
Charging Earbuds:
- Charge the Earbuds by placing them into the already charged case.
- The Ear Bud Indicator Lights will glow red while being charged.
- All Indicator Lights wi ll turn off once the earbuds are fu lly charged.
Pair Both Earbuds (TWS):
- Simultaneously hold down the Multi-Function Button on Both earbuds for 3 Seconds.
- The Pairing Indicator Light wi ll blink red and blue and a sound wi ll prompt that they are being paired.
- The blue light wi ll blink slowly to indicate that they have been paired.
- Select”Flex”from your device’s Bluetooth Interface
Make a Call:
- Connect the earbuds to your Phone’s Bluetooth.
- To receive an incoming call press the Multi-Function Button once.
- To ca ll the last contact in your call list – double click Multi Function Button.
Listen to Music:
- Connect the earbuds to your Phone’s Bluetooth.
- Use your Phone’s interface to select your music.
- Press the Multi-Function Button to Pause/Play Music.
Turn Off the Earbuds:
- Press the Multi-function Button for 5 Seconds or until the red light blinks
- The earbuds will automatically turn off if they are out of reach of the Bluetooth Device or if the Bluetooth Device shuts down.
CARE AND SAFETY
- Do not use this unit for anything other than its intended use.
- Keep the unit away from heat source, direct sunlight, humidity, water or any other liquid.
- Do not expose the device to extremely high or low temperatures, as it may damage the battery.
- Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper rep may place the user at serious risk.
- Keep the unit out of reach of children.
- This unit is not a toy.
BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries are
environmentally safe when fu lly discharged. Please refer to your local and
state laws for battery disposal procedures.
©SM TEK GROUP INC, All rights reserved.
Bluestone is a trademark of SM TEK GROUP INC.
New York, NY 10001
www.smtekgroup.com\
Documents / Resources
|
Bluestone TWS25 Flex Wireless
Earbuds
[pdf] User Manual
TWS25, Flex Wireless Earbuds, TWS25 Flex Wireless Earbuds
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>