Bluestone ZSK8 Color Ring Media Kit User Manual
- June 5, 2024
- Bluestone
Table of Contents
Bluestone ZSK8 Color Ring Media Kit
INTRODUCTION
The Color Ring Media Kit is an essential product for anyone who is interested in streaming, vlogging, or just taking some interesting SELFIES. The Color Ring Light makes for an easy hands-free experience for taking pictures or streaming. Just set the light to the color you desire and forget it’ Never worry about the lighting not being right ever again or bring photos either.
PACKAGE CONTENTS
- l x Foldable Tripod Stand
- 1 x 8-inch Ring Light
- 1 x Gooseneck Connector
- l x Phone I Holder
- l x Ball Head Joint
- l x Remote
PRODUCT OVERVIEW
SPECIFICATIONS & FEATURES
- 8-inch Ring I ight
- 6.5-foot usb cord
- 3.7-inch extendable phone holder
- 4-inch gooseneck connector
- 2-inch ball head and joint
- 7.5 inch folded up tripod
- 4-inch extended tripod
- 9 solid color modes
- 3 dual-tone modes
- 3 different rainbow spinning modes
- 1 bright white mode
- 360 rotating ball movement
- Eye-Hole for easy wall mounting
HOW TO USE
Constructing the Light
- First attach the ball joint head to the tripod
- Next attach the light to the ball Joint head
- Next attach the gooseneck onto the ring light by screwing it in
- Attach the phone holder to the gooseneck
- Use the USB to plus into an outlet in order to turn the light on
- Use phone holder to mount phone in center of light
- Turn on ring and enjoy!
Using the Remote
- The blue light indicates the light is plugged in properly and ready for use
- Use button that displays ON/OFF to turn light on and off
- Use nGB button to cycle between t 5 different nGB cycles
- Use Up and Down buttons to change the brightness when using a single color
- Use Up and Down buttons to change the speed of the ring when using multiple colors
- Use Mode button to cycle in between 3 warm color hues
CARE AND SAFETY
FCC Statment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. “Please note that
changes or modifications of this product is not expressly approved by the
party responsible for compliance could void the users authority to operate the
equipment.”
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SM TEK GROUP INC.,ADD: 132 32ND ST,STE #402,BROOKLYN NY 11232，Contact name: SHLOMO OIL 917-774-7755