701x xBase App User Manual
- June 11, 2024
- 701x
Table of Contents
701x xBase App
xBase is a device that can be mounted to any point of interest. It is a solar- powered device that can be used to track and monitor various data points. The device comes with a mobile application called 701x App that can be downloaded from the App Store or Google Play Store. The application enables the user to interface with xBase and access all the information and data that the device collects.
Getting Started
To start with, download the 701x app from the App Store or Google Play Store and install it on your phone. Once installed, follow the steps below to set up your xBase for the first time.
Downloading the 701x App
To interface with xBase, download the 701x app from the App Store or Google
Play Store and install it onto your phone.
Downloading the 701x App
- Open the App Store or Google Play Store on your phone.
- Search for “701x app” and download it.
Setting Up xBase
- Open the 701x app and follow the onscreen prompts to create an account. Then, log in to the account.
- Scan the 3D barcode on the front of the tag. The tags information will automatically populate into your app.
- Assign the xBase to the point of interest it will be mounted to.
- Mount the device such that the solar panel will be in direct sun.
- If using an external power adapter, plug the adapter into the device.
701x Information
701x is the manufacturer of xBase. For more information about the company and its products, please visit www.701x.com or email at info@701x.com.
Implementing AG Compliance
It is important to ensure that there is at least 20 cm separation from the user when the device is in use. Any changes or modifications made to the device may void the user’s authority to operate the equipment.
Setting Up xBase
Follow the steps below to set up your xBase for the first time.
- Open the 701x app and follow the onscreen prompts to create an account. Then, log in to the account.
- Scan the 3D barcode on the front of the tag. The tags information will automatically populate into your app.
- Assign the xBase to the point of interest it will be mounted to.
- Mount the device such that the solar panel will be in direct sun.
- If using the external power adapter, plug the adapter into the device.
Compliance/FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications may void the user’s authority to operate the
equipment.
Please ensure at least 20 cm separation from the user when the device is in
use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>