baby lock BLE-LF Lace Applicator Foot Instructions
- June 12, 2024
- Baby Lock
Table of Contents
baby lock BLE-LF Lace Applicator Foot
INSTRUCTIONS
Attach lace to fabric edges perfectly using the special guide on this foot. Set up the machine for 3-thread, overlock, rolled hem, or 2-thread serging. Adjust the guide and attach the lace.
MACHINE SETTINGS
| Needle: | Right, Left, or Both |
|---|---|
| Upper knife: | Engaged“ UNLOCKED” |
| Differential feed: | Normal |
| Stitch length: | 3-4 |
| Stitch width: | 3.5 |
ATTACHING LACE:
-
Attach lace applicator foot to machine and set up the machine for your desired stitch selection.
See manual for detailed instructions. -
Loosen adjustable screw on the top of the lace foot.
-
Raise the presser foot.
-
Place the fabric right side up under the foot to the cutting blade.
-
Insert the lace right side down into the guide and under the foot against the inside edge of the guide.
-
Align the guide with the placement of the right edge of the lace.
-
Move the guide right or left to align with the needles being used.
-
Lower the presser foot.
-
Check the guide position and tighten the screw.
-
Test sew for desired effect.
Customer Support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>