ZipVac 8200 ionVa Lightweight Corded Vacuum User Guide

8200 ionVa Lightweight Corded Vacuum
User Guide

8200 ionVa Lightweight Corded Vacuum

Thank you for choosing one of our exciting and innovative products. We strive to bring you the latest technology, providing lifelong value and keeping you ahead.
Vacuuming shouldn’t feel like a workout-especially when only dealing with small cleaning tasks. This super-lightweight. portable vacuum switches from a traditional vacuum cleaner to a handheld vacuum cleaner in seconds. A simple, convenient solution to your basic vacuum cleaner needs is right here.

• Makes cleaning a breeze with a super-lightweight design weighing under 51bs.
• Quickly switches from traditional vacuum cleaner to handheld vacuum cleaner.
• Included crevice tool lets you vacuum those hard-to-reach places.

Get ready to clean in FLOOR WHEEL DRIVE!

What·s in the Box

Your new ZipVac is easy and quick to assemble.
Let’s start with all the parts you will be taking out of the box:
Handheld Vacuum Bose Extender Handle Slim Nozzle Attachment Floor Roller Brush User Guide

21 Get Familiar with Your ZipVac

Setup

1. Insert the handle into the top of the vacuum and secure with the release clip.
2. Attach the floor nozzle or the crevice tool to the bottom of the vacuum.

Using the Vacuum

1. There ore two ways to clean with the vacuum-standard mode using the floor nozzle or hondheld mode using the crevice tool.
2. To switch to hondheld mode, detach the handle from the vacuum unit by undoing the release clip and pulling it out Press the release clip down into the vacuum unit to hide it
3. Remove the floor nozzle from the dustbin’s suction component and attach the crevice tool instead.
4. Use the power cord to plug the vacuum into the nearest wall outlet
5. The power switch is located on the hondheld vacuum base. “I” powers ON the vacuum, “O” turns the vacuum OFF.
6. Start cleaning!

Cleaning the Vacuum

Dustbin

1. Use the release clip on the bottom of the dustbin to empty dust. Remove any attachments from the dustbin for on easier clean.

HEPA Filter

1. Use the release clip on the hondheld vacuum base to open the dustbin and remove the HEPA filter.
2. Wash the HEPA filter under running water and let air dry. · If you ore replacing the HEPA filter, there is no need to wash it! Throw the old one out and insert a new one instead.
3. Make sure the HEPA filter is completely dry before re-inserting.

3.3 General Tips

• The floor nozzle and wheels con sometimes become jammed, in which case it will need to be cleaned to maintain maximum effectiveness. To do this, be sure that the vacuum is powered off and carefully remove anything that hos become entangled in the floor nozzle or wheels.
• The HEPA filter is suggested to be changed every 3 months.
• The crevice tool is best used for corners, edges, radiators, drawers, etc.

Precautions

1.  Always operate the vacuum with the dustbin and HEPA filter installed.
2. Unplug the vacuum before cleaning.
3. Be sure to not let the dustbin become too full.
4. Clean the HEPA filter by hand under running water only.
5. Do not use things like a hair dryer to dry the HEPA filter. Nr dry only.
6. Unplug vacuum while not in use.
7. Do not use outdoors or on wet surfaces.
8. Keep away from children.
9. Do not use with damaged cord or plug.
10. Return to authorized service center if the vacuum is not working. has been dropped. damaged. left outdoors. or dropped in water.
11. Do not pull or carry by cord. use cord as handle. close a door on cord. or pull cord around sharp edges or corners.
12. Be sure to keep the air intakes clean from dust lint. hair. or anything else that may block or reduce airflow.
13. Do not unplug by pulling on cord. To unplug. grasp the plug. not the cord.
14. Do not handle plug with wet hands.
15. Keep hair. loose clothing. fingers. and all parts of body away from openings and moving parts.
16. Turn vacuum off before unplugging.
17. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.
18. Do not vacuum anything that is burning or smoking, such as cigarettes, matches. or hot ashes.

Specifications

lonVac ZipVac Item No. 8200. Distributedby tzumi Inc. NY. NY. 10016.
©Copyright 2021 tzumi. All Rights ReseNed. Made In China.
All pictures shown are for illustration purposes onl~ Actual product may vary due to product enhancement Subject to change without prior notice.

If you hove any questions or need support setting up or using your ZipVac, email us at support@tzumi.com or call 1-855-GO- TZUMI

For more details on the ionVac family of products or to check out more brilliant innovations visit www.tzumi.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>