eta 3336 Hair straightener Instructions
- June 5, 2024
- ETA
Table of Contents
eta 3336 Hair straightener
Dear customer, thank you for buying our product. Before putting the appliance into operation, read carefully these instructions for use and store this manual properly together with the certificate of warranty, a cash voucher, and possibly with the package and the internal contents of the package.
SAFETY WARNING
-
Before the first use, read the instructions for use carefully, look at the picture and store the instructions for use for the future. Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
-
Never use the appliance if its power cord or plug is damaged, if
it does not work properly, if it fell down and was damaged or if it fell to the water. In this case, take the appliance to a special service to check its safety and proper function. -
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
The hair straightener must not be immersed in water or other liquids and it must not be used close to bathtubs, showers, washbasins or other water containers, including a swimming pool. If the straightener still falls into the water, do not take it out! First of all unplug the power cord from the socket and only then take out the hair straightener. In this case, take the appliance to a special service to check its safety and proper function.
-
If the hair straightener is used in a bathroom, it has to be disconnected from the electric power by unplugging the power cord from the socket because there is a risk close to the water even if the hair straightener is off.
-
For additional protection, we recommend the installation of current protection (RCD) with the nominal release current not exceeding 30 mA. Ask a control technician or an electrician for advice.
-
If the power cord of the appliance is corrupted, it has to be replaced by the producer, its service technician or a similarly qualified person so as to prevent dangerous situations.
-
Always unplug the appliance from the power supply if you leave it unattended and before assembly, disassembly or cleaning.
-
Before replacing accessories or accessible parts, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
-
Check whether the data on the type label corresponds with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according.
-
The appliance is intended for use in households only and for similar use! It is not designed for use in hair salons or for other commercial use!
-
Do not insert to or take the plug out of a socket with wet hands and do not pull the power cord!
-
Do not let the appliance in operation without supervision!
-
Do not put the hair straightener on hot heat sources (e.g. oven, stove, radiator).
-
No part of the appliance can get in contact with places sensitive to heat (e.g. eyes, ears, neck).
-
Take care when handling the appliance, and try to prevent injury (e.g. burns).
-
If the hair straightener is stored at lower temperatures, first of all, let its temperature adapt to the environment and thus you will maintain the firmness of the plastic parts.
-
The hair straightener must not be used for styling wigs, hairpieces or artificial hair.
-
A hair straightener can be used for styling natural, colored or bleached hair. But do not use it for styling hair that is treated with chemical substances (e.g. hairspray, styling agent, etc.), the temperature effect could be reduced due to sticking of chemical substances on the plates.
-
Also, do not put the hair straightener on soft and easily flammable surfaces (e.g. bed, towels, sheets, carpets); they could be damaged by hot parts of the appliance.
-
When handling the hair straightener, protect the power cord from contact with the hot surface of the plates or other sources of heat.
-
Switch off the hair straighteners right after its use, unplug it from the power supply and let it cool down. Then put it on a safe dry place, out of reach of children.
-
Check the condition of the power cord of the appliance regularly.
-
Do not wind the power cord around the appliance; this will extend life of the power cord.
-
The power cord must not be damaged by sharp or hot objects, or open fire, it must not be sunk into water or bent over sharp edges.
-
If you need to use an extension cord, it has to be uncorrupted and it has to comply with valid standards.
-
Never use the appliance for any other purpose than for that described in these instructions for use!
-
The manufacturer is not responsible for damage caused by improper handling of the appliance (e.g. fire, burning, hair damage, etc.) and its guarantee does not cover the appliance in the case of failure to comply with the safety warnings above.
DESCRIPTION OF THE APPLIANCE
- A1 – ON/OFF wheel
- A2 – temperature regulator
- A3 – control light
- A4 – heating plates
- A5 – turning joint of the power cord
- A6 – power cord
- A7 – locking the position of the iron
- A8 – optional attachment (brush)
INSTRUCTIONS FOR USE
Remove all the packing material and take out the hair straightener. Put the hair straightener on a suitable even surface (see par. I. SAFETY SHEET). Plug power cord connector A6 to an electric socket. Turn the A1 button to the desired temperature A1 which will turn on the appliance. The tongs start to heat to the preset temperature (about 5 min). If you wish to change the temperature, set the required temperature by temperature regulator A2 (in the range of 100 – 200 °C) according to the type of hair. Wait for a while until plates A4 are heated to the set temperature. Then the temperature will be kept automatically. Switch off the appliance after use by pressing button A1, then take power supply fork A6 out of the electric socket and let the appliance cool down before storing.
Temperature and type of hair
- Low temperature (100 – 150 °C) – for fine, bleached, or damaged hair,
- Medium temperature (150 – 170 °C) – for normal and wavy hair,
- High temperature (170 – 200 °C) – for strong, rough, and curly hair.
Hair straightening
Use the hair straightener for washed and dried or slightly damp hair, never
for wet hair. Before using the hair straightener, comb the hair so that it is
not disheveled. Start with styling the lower hair first. When styling hair, do
not put locks of hair that are too thick between the plates. Divide a lock in
about 5 cm of its width and put it into an open hair straightener. Then close
the hair straightener by pushing and moving it slowly on the lock from the
roots towards the hair tips. You can curl the tips thanks to the round edges
of the plates upwards or downwards. Repeat the process till you have created
the required hairstyle. Let the hair cool down before the final styling. The
appliance contains an optional brush which may be slid onto the bottom/upper
part of the pliers. It is recommended to lock the iron pliers with the A7
switch when using the brush and use it only then. Be careful when using the
brush to prevent injury by burning!
MAINTENANCE
Turn off the appliance before any maintenance, disconnect it from the power supply by unplugging the power cord from the electric socket, and let it cool down! Do not use rough and aggressive detergents! Treat the surface with a wet and soft cloth. Put the cooled straightener in a safe and dry place, out of reach of children and incapacitated persons.
ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for the production of packing, components, and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authority or at the local waste collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation for good, after disconnecting it from the power supply we recommend cutting off the power cord and thus it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by a professional service! Failure to comply with the instructions of the manufacturer will lead to the expiration of the right to guarantee repair!
TECHNICAL DATA
- Voltage (V) specified on the type label
- Input (W) specified on the type label
- Weight about (kg) 0,29
The product has received ES declaration of conformity according to Act as amended. The product matches the requirements of the below statutory order as amended.
- Committee Regulation No. 2006/95/ES as amended, setting the technical requirements of the electrical appliance as low.
- Committee Regulation No. 2004/108/ES as amended, setting the technical requirements of products in terms of their electromagnetic compatibility
The manufacturer reserves the right to make insignificant changes to the standard design that do not affect the function.
PRODUCER: ETA a.s., Zelený pruh 95/97, 147 00 Praha 4-Bráník, Czech Republic.
WARNING:
Do not use the appliance close to bathtubs, showers, bash basins, or other
water containers.