Taylor Pneumatic T-7765N Jitterbug Sander Instructions
- June 5, 2024
- Taylor Pneumatic
Table of Contents
T-7765N Jitterbug Sander
T-7765N Jitterbug Sander
OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH A FEW DROPS OF AIRTOOL OIL THROUGH THE AIR INLET. RUN FOR ONE SECOND TO COAT.
ALL INTERNAL PARTS
USE 90 PSI MAXIMUM
Ref #| Part #| Description| Qty| Ref #| Part #|
Description| Qty
---|---|---|---|---|---|---|---
1| 7765N01| Lever| 1| 22| 7765N22| Rotor Shaft| 1
2| 7765NO2| Rubber Grip/Metal Strip| 1| 23| 7765N23| Key| 1
3| 7765NO3| Screw| 4| 24| 7765N24| Gasket| 1
4| 7765N04| Body| 1| 25| 7765N25| Base| 1
5| 7765N05| Inlet| 1| 26| 7765N26| Screw & Washer| 4
6| 7765N06| Pin| 1| 27| 7765N27| Spring Washer| 6
7| 7765N07| Retaining Ring| 1| 28| 7765N28| Rubber Post| 4
7A| 7765N07A| Wave Washer| 1| 29| 7765N29| Cap Screw| 2
8| 7765N08| Retaining Ring| 2| 30| 7765N30| Cap Screw| 2
9| 7765N09| 0-Ring| 3| 31| 7765N31| Balancer Screw| 1
10| 7765N10| Speed Regulator| 1| 32| 7765N32| Plug| 1
11| 7765N11| Exhaust Cover| 1| 33| 7765N33| Balancer| 1
12| 7765N12| Valve Spring| 1| 34| 7765N34| Bearing Housing| 1
13| 7765N13| 0-Ring| 1| 36| 7765N36| Bearing| 1
13A| 7765N13A| 0-Ring| 1| 37| 7765N37| Bearing Plate| 1
14| 7765N14| Valve Stem| 1| 38| 7765N38| Washer| 2
15| 7765N15| 0-Ring| 1| 39| 7765N39| Paper Clamp| 12
16| 7765N16| Bearing| 2| 40| 7765N40| Flat Head Screw| 12
17| 7765N17| End Plate| 2| 40A| 7765N40A| Nut| 1
18| 7765N18| Cylinder| 1| 41| 7765N41| Bearing Stop Screw| 1
19| 7765N19| 0-Ring| 1| 42| 7765N42| Shoe Plate| 1
19A| 7765N19A| Pin| 1| 43| 7765N43| Sanding Pad| 1
20| 7765N20| Rotor| 1| 44| 7765N44| Muffler| 1
21| 7765N21| Rotor Blade (4 per set)| | 45| 7765N45| Screw & Lock Washer| 4
505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, Florida
|
FOR WARRANTY INFORMATION &
WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
3/22 TPTC /all rights reserved /COPYRIGHT 2022 / final
|
Ph. 561-732-1111
Fax 561-731-4412
Toll Free 800-805-8665
---|---|---