VIVOLINK VLHDMIEXTDGL100 4K Optical Fiber Extender User Manual

VIVOLINK VLHDMIEXTDGL100 4K Optical Fiber Extender

Preface

Read this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different models and specifications are subject to real product.
This manual is only for operation instruction, please contact the local distributor for maintenance assistance. The functions described in this version were updated till January, 2019. In the constant effort to improve the product, we reserve the right to make functions or parameters changes without notice or obligation. Please refer to the dealers for the latest details.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. Operation of this equipment in a residential area is likely to cause interference, in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference. Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment.

SAFETY PRECAUTIONS

To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Introduction

The extender set transmits HDMI signal using a Fiber Optic cable. The extender set supports up to 4k resolutions. It extends signals up to 2000m/300m via single mode or multi-mode cable. To achieve the best performance, it is recommend the product be used with OM2 or greater multimode fiber. Built-in diagnostic LEDs ensure hassle-free and robust installations.

Package List

• 1x 4K Optical Fiber Extender (Tx and Rx are included)
• 2x Power Adapter (5V DC 1A)
• 1x Optical Fiber Cable (single-mode)
• 1x User Manual

Note: Check whether all the items listed above are included in your package. If not, contact your dealer to make up.

Appearances

Transmitter

1. PWR LED: Illuminate when powered up
2. LINK LED: Illuminate when connecting the Transmitter and Receiver module.
3. USB: Insert a DC 5V 1A power adapter here.
4. OUT: Connect with IN of the Receiver module.

Receiver

• PWR LED: illuminate when powered up
• LINK LED: Illuminate when connecting the Transmitter and Receiver module.
• USB: Insert a DC 5V 1A power adapter here
• IN: Connect with OUT of the Transmitter module.

Connection
The figure below illustrates a typical connection that can be utilized with VLHDMIEXTDGL100:

• Step1. Insert the transmitter into the HDMI port of an HDMI source device (e.g. a PC).
• Step2. Connect the OUT port of the transmitter to the IN port of the receiver with an optical fiber cable.
• Step3. Insert the receiver into the HDMI port of an HDMI sink device (e.g. a monitor).
• Step4. Plug DC 5V power adapters to the USB ports of both the transmitter and the receiver.

Note: Connect the transmitter/ receiver with the HDMI source/ sink directly or through an HDMI cable.

Specification

Transmitter

Input Signal| (1) HDMI
Input Connector| (1) 19-pin Type A male HDMI
Input Signal| HDMI 1.4
Output| (1) Optical Fiber
Output Connector| (1) LC connector
Output Signal| Optical Fiber
Receiver
Input Signal| (1) Optical Fiber
Input Connector| (1) LC connector
Input Signal| Optical Fiber
Output| (1) HDMI
Output Connector| (1) 19-pin Type A male HDMI
Output Signal| HDMI 1.4
General
Resolution| 4K (Max)
Audio Format| PCM, Dolby Digital, DTS, DTS-HD
HDMI Standard| 1.4
HDCP Version| 1.4
EDID Pass-through| Supported
HPD| Supported

Transmission Distance

| Single-mode fiber: HDMI signal without HDCP ≤ 2000m Single-mode fiber: HDMI signal with HDCP ≤ 300m Multi-mode fiber: ≤ 300m
Operation Temperature| -10℃ ~ +55℃
Storage Temperature| -25℃ ~ +70℃
Relative Humility| 10%-90%
Power Supply| Input: AC 100~240V, 50/60Hz; Output: DC 5V 1A
Power Consumption| ≤ 2.5w
Dimension (WHD)| 60mm x 10mm x 22mm
Net Weight| 26g

Troubleshooting & Maintenance

Change for qualified cable.

Power led is off, operations don’t work

| Not been powered| Power up the unit
Poor contact of USB port| Make sure power adapter is in well contact

No output on the display

| Source/ Display is off| Turn on the source/ display

Poor contact of HDMI ports

| Check the HDMI ports one by one to make sure they’re in well contact.

Note: If your problem still remains after following the above troubleshooting steps, please contact your local dealer or distributor for further assistance.

Customer Service
The return of a product to our Customer Service implies the full agreement of the terms and conditions hereinafter. Their terms and conditions may be changed without prior notice.

1. Warranty
   The limited warranty period of the product is fixed three years.

2. Scope
   These terms and conditions of Customer Service apply to the customer service provided for the products or any other items sold by authorized distributor only.

3. Warranty Exclusion:

   • Warranty expiration.
   • Factory applied serial number has been altered or removed from the product.
   • Damage, deterioration or malfunction caused by:
   • Normal wear and tear.
   • Use of supplies or parts not meeting our specifications.
   • No certificate or invoice as proof of warranty.
   • The product model shown on the warranty card does not match with the model of the product for repair or had been altered.
   • Damage caused by force majeure.
   • Servicing is not authorized by the distributor.
   • Any other causes which do not relate to a product defect.
   • Shipping fees, installation, or labor charges for installation or setup of the product.

4. Documentation:
   Customer Service will accept defective product(s) in the scope of warranty coverage at the sole condition that the defeat has been clearly defined, and upon reception of the documents or copy of invoice, indicating the date of purchase, the type of product, the serial number, and the name of the distributor.

Remarks: Please contact your local distributor for further assistance or solutions.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>