SMART MEDIA SOLUTIONS K12-028-1 Iconic Stand Instruction Manual
- June 5, 2024
- SMART MEDIA SOLUTIONS
Table of Contents
SMART MEDIA SOLUTIONS K12-028-1 Iconic Stand
Instructions for Mounting
Warning
A correct mounting is extremely important and this is not the responsibility
of SMS Evoko Group AB. Faulty mounting may result in injury to persons or
damage to equipment. SMS will not be responsible in any way if the product has
been mounted incorrectly. Mounting fittings are not included with the
productfor reasons of safety, since the properties and bearing strength of
walls/ceilings are specific for each case. Suitable mounting fittings must be
selected based on the material of the wall/ceiling.Obtain advice from
aspecialist in the field or from a specialist shop concerning the choice of
mounting fittings. It is the responsibility of the installer to ensure that
the wall/ceiling can support at least four times the combined weight of the
screen/projector and bracket. The maximum load for this product is given in
the table in these installation instructions. The instructions for
installation and use of the screen/projector must also be followed with
respect to the location and attachment of the screen/projector.
Warranty terms and conditions
- SMS guarantees that a product that SMS has determined to be defective as a result of deficient manufacture or material will be repaired or – if necessary – replaced, without cost, on the condition that a claim is made within the period of warranty, which is 5 years. The guarantee does not apply for normal wear and tear.
- In the event of a claim being made under the terms of the warranty, the product and the original purchase receipt are to be returned to SMS. The name of the supplier and the date of purchase must be clearly legible on the receipt. The owner is to pay the cost of returning the product to SMS, while SMS is to pay the cost of returning the product subsequent to the owner.
- The warranty provided by SMS does not apply under the following conditions:
- If the product has been drilled, mounted and/or used in any way that is not in accordance with the instructions for use, or if it has been mounted using inappropriate mounting fittings.
- If the product has been modified or repaired by anyone other than SMS.
- If the defect has arisen as a result of external factors (that are not associated with the product), such as lightning strike, water damage, fire, mechanical scratching, storage at extreme temperatures, weather conditions, solvents or corrosive agents, faulty use, or carelessness.
- If the product has been used for equipment other than that specified on the packaging.
ASSEMBLY INSTRUCTIONS
YOU WILL NEED
NOT INCLUDED
NUMBER OF PERSONS REQUIRED
LIST OF PARTS
K1 SCREW KIT
INSTALLATION
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>