KEYENCE DX Series Handheld Terminal Instruction Manual

KEYENCE DX Series Handheld Terminal Instruction Manual

Symbols

The following symbols alert you to important messages. Be sure to read these messages carefully.

• IEEE 802.11a/b/g/n/ac: These wireless LAN standards are set by the IEEE (Institute of Electrical and Electronics Engineers) 802 LAN/MAN Standards Committee responsible for formulating LAN technology standards.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by KEYENCE is under license. Other trademarks and brand names are the property of their respective owners.
• microSD, micro SDHC, and microSDXC are trademarks of the SD Association.
• Android™ is a trademark of Google LLC.
• Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries.
• ARM is a trademark or registered trademark of ARM Limited.
• Intel is a trademark or registered trademark of Intel Corporation.
• FeliCa is a registered trademark of Sony Corporation.
• Other company names and product names described in this manual are registered trademarks or trademarks of each company.
• It is prohibited to use or copy all or any part of this manual without prior approval.
• The information contained in this manual is subject to change without notice.
• Software information This product incorporates the software files developed independently by or for Keyence Corporation, software files owned and licensed by a third party, and software files subject to certain open source license agreements. For information about such open source software files, please refer to the information displayed on the following screen. DX-A600/A400: From the app list screen, Settings Device information Legal information DX-W600: From the Start menu (All apps), DX setup tool Device information Legal information Such open source software files are provided on an “AS IS” basis to the maximum extent permitted by applicable law. You may obtain a copy of the source code corresponding to the binaries for GPL/ LGPL-licensed files by sending a request to Keyence customer service at “soft-license@keyence.co.jp.” There will be a charge to cover the costs of providing the source code.

Safety Precautions on Laser Product

The DX Series uses a visible semiconductor laser as a light source. Follow the instructions mentioned in this manual. Otherwise, injury to the human body (eyes and skin) may result.

Safety Precautions on LED Product

The degree of risk of this product is shown below.

• Risk group 1
• LED product is classified as shown below according to IEC 62471
  • Exempt group Does not pose any photobiological hazard.
  • Risk Group 1 (Low-Risk) Does not pose a hazard due to normal behavioural limitations on exposure.
  • • Risk Group 2 (Moderate-Risk) Does not pose a hazard due to the aversion response to very bright light sources or due to thermal discomfort.
  • Risk Group 3 (High-Risk) May pose a hazard even for momentary or brief exposure.

Follow the instructions mentioned in this manual. Otherwise, injury to the human body (eyes and skin) may result.

Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eyes

Safety Precautions

◼⬛ General cautions

⬛ Handling of DX Series

⬛ Handling of main battery (DX-BP6/BP3) and communication unit with built- in main battery (DX-BS6/BS3/BQ6/BQ3)

Observe the following precautions during use. Failure to do so may result in heat generation, smoke generation, fire, explosion, battery leakage, gas leakage, etc. of the main battery pack.

• Only use the specified battery.
• Do not charge, use, or store the main battery at locations of high temperature above the specified range—such as near fire, in a heated car, and under the scorching sun—or at locations of low temperature below the specified range.
• Do not put it into fire or subject to heat. If there is battery leakage or abnormal smell, immediately take it away from fire.
• Do not drop the main battery or subject it to strong pressure (such as by crushing, bending, deforming, making holes in, cutting, or throwing it).

Do not charge when conductive material is affixed to the charging/ communication contact. Clean this contact prior to charging.

Precautions on Regulations and Standards

⬛ Precautions on wireless LAN

Remove the main battery of the DX Series near locations where using wireless devices is banned at medical institutions or near electric devices for medical purposes. Carry and use the product away from an implanted cardiac pacemaker.

• Communication may be impossible at locations near metallic objects, locations surrounded with metallic walls, where there is a lot of metallic powder, and in similar usage environments. Be sure to check whether communication is possible prior to installation.
• If this product is used near devices with the same frequency band, radio wave interference may occur and the communication speed may become slow or communication may become impossible. [Japan]
• Never disassemble or modify this device. Doing so is prohibited by the Radio Act. This device is specified radio equipment according to the Radio Act. Follow the criteria defined within this act to obtain construction design certification.
• This device may be used outdoors when communicating with registered stations in the 5.2 GHz band.

Electromagnetic display of technical standards compliance mark This terminal complies with technical standards based on the Radio Act and Telecommunications Business Act of Japan. The mark indicating this compliance ( ) can be viewed as indicated below. DX-A600/A400: From the app list screen, Settings → About phone → Regulatory DX-W600: From the Start menu (All apps), DX setup tool → Device information → Regulatory

CE and UKCA Markings
KEYENCE Corporation has confirmed, on the basis of the following specifications, that this product complies with the essential requirements of the applicable EU Directive(s) and UK regulations. Be sure to consider the following specifications when using this product in the Member States of the European Union and in the United Kingdom.

• RE Directive (CE) and Radio Equipment Regulations (UKCA)
• The full text of the EU declaration of conformity is available at the following internet address: http://www.keyence.com/cedoc
• Frequency band of operation: Maximum radio-frequency power

DX-W600
WLAN
2400 to 2483.5 MHz: 20 dBm (100 mW)
5200 to 5690 MHz: 23 dBm (199.5 mW)
Bluetooth
2400 to 2483.5 MHz: 9 dBm (7.9 mW)
NFC:
13.56 MHz: 17 dBuA/m
DX-A600GE
WLAN
2400 to 2483.5 MHz: 20 dBm (100 mW)
5120 to 5350 MHz: 23 dBm (199.5 mW)
Bluetooth
2400 to 2483.5 MHz: 13 dBm (20 mW)
NFC:
13.56 MHz: -10 dBuA/m
WWAN
WCDMA
Band 1: 20.5 dBm (112.2 mW)
Band 8: 24.5 dBm (281.8 mW)
LTE
Band 1: 20 dBm (100 mW)
Band 3: 21 dBm (125.9 mW)
Band 7: 20 dBm (100 mW)
Band 8: 24 dBm (251.2 mW)
Band 38: 24 dBm (251.2 mW)
DX-A400GE
WLAN
2400 to 2483.5 MHz: 17 dBm (50.1 mW)
5120 to 5350 MHz: 22 dBm (158.5 mW)
Bluetooth
2400 to 2483.5 MHz: 10 dBm (10 mW)
NFC:
13.56 MHz: -12 dBuA/m
WWAN
WCDMA
Band 1: 22.5 dBm (177.8 mW)
Band 8: 24 dBm (251.2 mW)
LTE
Band 1: 22.5dBm (177.8 mW)
Band 3: 24 dBm (251.2 mW)
Band 7: 18.5 dBm (70.8 mW)
Band 8: 24 dBm (251.2 mW)
Band 38: 20.5 dBm (112.2 mW)

Remarks: These specifications do not give any guarantee that the end-product with this product incorporated complies with the essential requirements of RE Directive and Radio Equipment Regulations. The manufacturer of the end-product is solely responsible for the compliance on the end-product itself according to this directive and these UK regulations.
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

UL certification

The DX Series complies with the following UL/CSA standards and has obtaied the UL/ C-UL certifications.

• UL File No. E167973
• UL category AZOT/AZOT7
• Applicable standards UL 62368-1 CAN/CSA-C22.2 No. 62368-1
• This product is intended to be supplied by an UL Listed power supply and power cord suitable for use at 55°C min., the power supply output is rated: 5 Vdc, 2 A with marked Class II, L.P.S. or PS2, if need further assistance, please contact KEYENCE CORPORATION for further information.

Be sure to consider the following specifications when using this product as a UL certified product. Use this product in combination with the DX- BS/BQ/BP*/KE1, which has obtained UL certification.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Regulations

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interface, and (2) this
  device must accept any interference received, including interference that may cause undesired operation.

• Application regulation
  FCC Part 15 Subpart B Class A
  FCC Part 15 Subpart C
  FCC Part 15 Subpart E

• 5150-5350MHz band is restricted to indoor operations only.

• Regulatory information page is located at: DX-A600/A400: From the app list screen, Settings → About phone → Regulatory DX-W600: From the Start menu (All apps), DX setup tool → Device information →Regulatory

• This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

• This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

• This equipment should be installed and operated at least 10 mm away from your body.

⬛ ISED Regulations

This device complies with the following regulations specified by the ISED.

• Applicable regulation
  CAN ICES-003 (A) / NMB-003 (A)
  RSS-247
  RSS-102

• The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

• Operations in the 5250-5350 MHz band are restricted to indoor usage only.

• 5600-5650 MHz band is not allowed at Canada.

• This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

• The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power
  if such function is available.

• This equipment should be installed and operated at least 10 mm away from your body.

Precautions for Proper Use

⬛ Handling of packing

• If units such as the DX-BS6 are not properly attached, the enclosure rating of the DX Series cannot be guaranteed. When using this product in environments where water or dust is present, check if these units are properly attached.
• Dropping the DX Series or subjecting it to extreme shock may lead to the loss of water-proofing. Take adequate care when handling this product.

Unit Installation

As an example, the installation of the DX-BS6 is explained below.

1. Insert the tip of the unit into the back of the main unit.

2. Attach the unit to the main unit by using two fingers to push the two parts of the unit indicated with arrows until
   they click.

• To remove the unit, press the tabs on the back of the main unit from the left and right, and then pull the unit up from the main unit.

⬛ microSD / nano SIM card installation
The DX-A600/A400 has a microSD slot and a nano SIM slot. The DX-W600 has a microSD slot.

Cleaning

Clean the following parts with compressed air periodically.
If removing dirt is difficult, use a dry cotton swab to clean the unit connectors and charging/ communication contact.
(Use absolute ethanol if dirt is stuck on them.) When using an expansion unit, also clean its charging/communication contact.

If dirt or dust is attached, contact failure may occur on the unit connectors or charging/communication contact. This may cause charging function deterioration and instantaneous interruption. Make sure that textile waste is not attached to the unit connectors or charging/ communication contact when cleaning.

Checking the Package

When opening the package, check that the following items are all included. In the event of missing, defective, or damaged items, contact your nearest KEYENCE sales office.
⬛ DX-A600/A600GE/A400/A400GE/W600

Specifications

Outline Dimensional Drawings

WARRANTIES AND DISCLAIMERS

1. KEYENCE warrants the Products to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment. If any models or samples were shown to Buyer, such models or samples were used merely to illustrate the general type and quality of the Products and not to represent that the Products would necessarily conform to said models or samples. Any Products found to be defective must be shipped to KEYENCE with all shipping costs paid by Buyer or offered to KEYENCE for inspection and examination. Upon examination by KEYENCE, KEYENCE, at its sole option, will refund the purchase price of, or repair or replace at no charge any Products found to be defective. This warranty does not apply to any defects resulting from any action of Buyer, including but not limited to improper installation, improper interfacing, improper repair, unauthorized modification, misapplication and mishandling, such as exposure to excessive current, heat, coldness, moisture, vibration or outdoors air. Components which wear are not warranted.
2. KEYENCE is pleased to offer suggestions on the use of its various Products. They are only suggestions, and it is Buyer’s responsibility to ascertain the fitness of the Products for Buyer’s intended use. KEYENCE will not be responsible for any damages that may result from the use of the Products.
3. The Products and any samples (“Products/Samples”) supplied to Buyer are not to be used internally in humans, for human transportation, as safety devices or fail-safe systems, unless their written specifications state otherwise. Should any Products/Samples be used in such a manner or misused in any way, KEYENCE assumes no responsibility, and additionally Buyer will indemnify KEYENCE and hold KEYENCE harmless from any liability or damage whatsoever arising out of any misuse of the Products/ Samples.
4. OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE PROVIDED WITH NO OTHER WARRANTIES WHATSOEVER. ALL EXPRESS, IMPLIED, AND STATUTORY WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED. IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED ENTITIES BE LIABLE TO ANY PERSON OR ENTITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE,
   SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY DAMAGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE OF ITS AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD PARTY’S CLAIM FOR DAMAGES OR ANY OTHER CLAIM AGAINST BUYER. In some jurisdictions, some of the foregoing warranty disclaimers or damage limitations may not apply

BUYER’S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or delivered to a third party, Buyer must provide such third party with a copy of this document, all specifications,
manuals, catalog, leaflets and written information provided to Buyer pertaining to the Products/Samples.

www.keyence.com/glb

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>