EXCEL 40520 Xlerator Hand Dryer User Manual

: October 30, 2023
: EXCEL

Table of Contents

EXCEL 40520 Xlerator Hand Dryer
Product Information
Product Usage
INSTALLATION INSTRUCTION
TOOLS NEEDED
ONE-YEAR LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EXCEL 40520 Xlerator Hand Dryer

Product Information

The XLERATOR Dryer is a high-speed, energy-efficient hand dryer that is designed to dry hands in 8-10 seconds. The dryer features a HEPA Filter that removes 99.97% of airborne bacteria and particles, making it a hygienic solution for hand drying. The product comes with a one-year limited warranty from the date of shipment from the manufacturer’s factory.

Product Usage

Disconnect the power to the dryer.
Remove the cover of the dryer with the Tamperproof Hex Wrench provided.
Remove the Pre-Filter from HEPA Filter and save for reuse. See Figure 1.
Remove and save two (2) screws securing HEPA Filter to the blower housing and remove the Filter as shown. See Figures 1 and 3.
Take the HEPA Filter out of the clear sealed plastic wrap (Figure 2) and insert the HEPA Filter into the HEPA Filter Adapter. DO NOT push on the white filter media. This can damage the filter media. The side with the foam gasket around the perimeter of the HEPA Filter should enter into the HEPA Filter Adapter first. Fasten the HEPA Filter to the HEPA Filter Adapter with the two (2) screws which were removed and saved in Step 4. See Figures 1 and 3.
Snap the Pre-Filter into place. Do this by simply pushing the Pre-Filter over the HEPA Filter so that the Pre-Filter clips snap into the square cutout on each side of the Pre-Filter.
The installation is now complete. Reinstall the cover to the hand dryer and restore power.

WARNING: To reduce the risk of electric shock, fire & personal injury, installation must be performed by qualified electrical service personnel. Disconnect power to the dryer before installing the filter.

Note: The warranty explicitly excludes normal wear and tear on the filter or Pre-Filter, as well as faulty installation, accident, misuse, or vandalism.

INSTALLATION INSTRUCTION

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE & PERSONAL INJURY, INSTALLATION MUST BE PERFORMED BY QUALIFIED ELECTRICAL SERVICE PERSONNEL. DISCONNECT POWER TO THE DRYER BEFORE INSTALLING THE FILTER.

TOOLS NEEDED

Phillips Head Screwdriver (Not Included)
Tamper-Proof Hex Wrench (Included)

Disconnect the power to the dryer.
Remove the cover of the dryer with the Tamperproof Hex Wrench provided.
Remove Pre-Filter from HEPA Filter and save for reuse. See Figure 1.
Remove and save two (2) screws securing HEPA Filter to blower housing and remove Filter as shown. See Figures 1 and 3.
Take the HEPA Filter out of the clear sealed plastic wrap (Figure 2) and insert the HEPA Filter into the HEPA Filter Adapter. DO NOT push on the white filter media. This can damage the filter media. The side with the foam gasket around the perimeter of the HEPA Filter should enter into the HEPA Filter Adapter first. Fasten the HEPA Filter to the HEPA Filter Adapter with the two (2) screws which were removed and saved in Step 4. See Figures 1 and 3.
Snap the Pre-Filter into place. Do this by simply pushing the Pre-Filter over the HEPA Filter so that the Pre-Filter clips snap into the square cutout on each side of the Pre-Filter. The installation is now complete. Reinstall the cover to the hand dryer and restore power.

ONE-YEAR LIMITED WARRANTY

This product is warrantied to be free from manufacturing defects only for a period of one year from the date of shipment from the Manufacturer’s factory at 357 Chestnut St., East Longmeadow, Massachusetts 01028. This warranty explicitly excludes normal wear and tear on the filter or Pre-Filter, as well as faulty installation, accident, misuse, or vandalism. In the event of a breach of the warranty described above, the owner may notify the Manufacturer by telephone or in writing of the defect and, within a reasonable time, the Manufacturer shall send a suitable replacement part to remedy said defect, and the owner shall be charged for said part at the current price level. The owner may return the defective part to the Manufacturer, postage prepaid by the owner, along with the serial number of the defective product and the Manufacturer will then issue to the owner a full credit for the repair part, including outgoing postage to a Continental U.S. destination.
Any implied warranties of merchantability or fitness for a particular purpose are hereby limited to the duration of the express written warranty contained herein. There are no other warranties and remedies except as contained herein. This warranty shall inure to the benefit of the owners, Successors, and Assigns.

EXCEL DRYER , Inc. East Longmeadow, MA