NEEWER RGB18 smart ring light Instruction Manual
- June 5, 2024
- NEEWER
Table of Contents
****
**NEEWER RGB18 smart ring light
**
Copyright
2021 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved. This document
is the sole property of Shenzhen Neewer Technology Co., Ltd and shall not be,
reproduced, transmitted, transcribed, stored in a retrieval system or
translated in any form, by any means, without prior written permission from
Shenzhen Neewer Technology Co., Ltd. Shenzhen Neewer Technology Co., Ltd
reserves the right to change
Content in this instruction manual at any time and without prior notice.
Functions
Short-press the power button to turn on or to activate sleep mode; long-press
for 2 seconds to turn off.
Short press HSI” to switch between scenes and rotate to adjust settings.
Display
Mode Function
CCT
Short press
the “MODE” button until “CCT” mode is shown on the display screen; then rotate
the “BRR” or “HSI” knob to adjust the brightness or color temperature.
HSI
Short press the “MODE” button until “HSI” mode shows on the display. Turn the
“HSI” knob to adjust the hue from 0 to 360.
In HSImode, short press the” HSI” Knob to switch between the hue and
saturation settings. The hue and saturation levels can be adjusted by pressing
and holding the dial. The saturation value ranges from 0 to 100 (100 for )
SCENE
Short press the “MODE” button until the display screen shows the “SCENE” mode, short press or rotate the “HSi” knob to switch between other scene ettects.
Available Scenes are as follows:
Install the Ring Light
- Lamp Body Retention Knob
- Bracket Secure Knob
Mount the adapter base onto the and turn it clockwise using the (2) bracket secure knob until it locks.
Turn the lamp retention knob “ 1 ” anticlockwise until the lamp body is
loose, and then adjust the angle. 
Turn the lamp retention knob “1” clockwise until the lamp
body is securely in place.
Install Adapter Base
- Screw Adapter base
- Angle Adjustment Knob
- Base Locking Ring
Align the threaded screw of the adapter and insert threaded screw “ 1 ” into the camera base, then rotate it clockwise until the camera is secured.
Turn the angle adjustment knob “2”clockwise until the camera is secure.
Insert the
adapter base into the cold shoe of lamp body, and turn the base locking ring
“1” clockwise until it is locked.
Mount the mobile phone holder
- Screw Adapter base
- Angle Adjustment Knob
- Base Locking Rinng
Align the threaded screw of the adapter and insert screw thread “1” into the mobile phone holder. Turn clockwise until secure.
Insert the adapter base into the cold shoe of lamp body, and turn the base
fixing knob “ 3 ” clockwise until it is secure. 
Turn the angle adjustment knob (2) clockwise
until it is locked, and place the phone in the phone holder.
Bluetooth Remote Control
- Power on the Bluetooth Remote Control.
- Turn on your phone’s Bluetooth, find “AB Shutter3” , and pair with your phone.
- Open the camera app on phone.
- Press to take a photo.
It the indicator on the remote control does not light up, check whether the battery cover is loose or replace with a new battery.
Safety Notes
- Please do not stare directly at the light when in use to avoid the risk of visual impairment.
- Please do not modify cables to avoid injury.
- Please do not dismantle or modify the circuit of the item (unless a certified professional.
- Please use the power adapter in the package contents ora compatible power adapter.
- Please do not use alcohol or liquid to clean the light to prevent product damage.
- Please do not subject the product to any form of physical shock.
- Please do not expose the item to direct sunlight for long periods of time.
- Please unplug the light when not in use.
- Please use a soft cloth to wipe the product.
- Failure to follow operation procedures and warnings listed in the manual will void the warranty.
Product Parameters
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>