BLUEWEAR SIZE RANGE GLOVE WINTER Instruction Manual
- June 4, 2024
- BLUEWEAR
Table of Contents
BLUEWEAR SIZE RANGE GLOVE WINTER Instruction Manual
WARNING! Gloves shall not be worn when there is a risk of entanglement by
moving parts of machine.
The durability of the gloves depends on how they are used. Always check that
the gloves are in good condition before using them. Keep the gloves in a
clean, dry and ventilated place, free from moisture, dirt, mould and sunlight.
Do not leave the gloves in contaminated condition if they are going to be
reused. Remove as much as possible of any contamination from the gloves after
using them. Dispose of in accordance with current legislation. The materials
used are not known to cause allergies. If any reaction occurs discontinue use.
EU DECLARATION OF CONFIRMITY
Item number 016544, 016545, 016546, 016547
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the responsibility of manufacturer.
ASSEMBLY GLOVE WINTER/WATER
size 8, 9, 10, 11
Confirm to the following directives, regulations and standards:
| Directive/Regulation | Harmonised standard |
|---|---|
| PPE (EU) 2016/425 | EN ISO 21420:2020, EN 388:2016+A1:2018, EN 511:2006 Cat II |
EN 388
2 1 2 1 x
EN 511
2 4 1
The PPE is identical to the PPE which is subject of EU type examination
certificate No:| OZ0612-CPT001/21
---|---
Name and address of the notified body involved:| MIRTA-KONTROL d.o.o.
Javorinska 3, HR-10040 Zagreb-Dubrava, Croatia NB No: 2474
This product was CE marked in year:
Skara 2021-08-19
Maria Sihvonen Grahn
BUISNESS AREA MANAGER
DoC: EN-SE-NO-PL-DE-FI-FR-NL
EN 388:2016+A1:2018
Cat II
Tested on gloves palm
- Product not assessed for this property
EN 511:2006
Cat II
*0= Water penetration after 5 min.
*1= No water penetration after 5 min.
- Product not assessed for this property
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>