globe 91002200 LED 3-Light Vanity with Color Control Instructions
- June 4, 2024
- globe
Table of Contents
globe 91002200 LED 3-Light Vanity with Color Control
FOR YOUR SAFETY
Most electrical accidents are caused by carelessness or ignorance. If you
combine a basic knowledge of electricity, a healthy respect for it, and a dose
of common sense, you can safely tackle many household electrical repairs. Here
are some basic guidelines for working with electricity:
Before working on a circuit, go to the main service panel and remove the fuse
or trip the breaker that controls that circuit.
Tape a sign to the panel warning others to leave the circuit alone while you
work.
Before touching any wire, use a voltage tester to make sure it’s not live
Whenever you check for voltage in a receptacle, check both outlets- each may
be controlled by a separate wiring circuit.
When replacing fuses, turn off the main power first. Make sure your hands and
feet are dry, and place one hand behind your back to prevent electricity from
making a complete circuit through your chest. Touch a plug fuse only by its
insulated rim. Remove cartridge fuses with a fuse puller.
Use tools with insulated handles and ladders made of wood or fiberglass.
Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
Never disable grounding devices. Make sure that all appliances requiring
grounding are properly grounded, and that the electrical system itself is
properly grounded.
Meet or exceed all electrical code requirements that cover the work you are
doing.
Always work with enough light to see what you are doing; it’s easy to make
mistakes when you’re working in dim light.
When in doubt about the safety of any electrical repair or test, call in a
professional.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
**5-year warranty**
Since 1932, Globe has taken pride in offering products of the highest quality,
and a level of service unparalleled in the industry.
Should you encounter any difficuhies, have any questions or simply wish to
offer us your valuable feedback, you may contact us in the following ways:
Toll Free Telephone: 1-888-543-1388
(North America Only)/
Toll Free Fax: 1-800-668-4562 (North
America Only)
E-Mail: info@globe-electric.com / Mail:
Globe Electric
Customer Service Department
150 Oneida, Montreal, Quebec, Canada H9R 1A8
Please visit our website to discover other quality Globe products: http://www
.globe-electric.com
INSTRUCTIONS
ELECTRICAL INSTALLATION
FIG. 1. Place the wall swITch to the “OFF” posITion.
Depending on which type of fuse box you have in your home:
FIG. 2. Place eITher the main (Master) switch to the • OFF’ posITion,
cutting off power to your entire home
OR turn off the individual swITch that provides power to where the fixture
will be installed.
OR
FIG. 3. Place either the main (Master) switch to the “OFF” position,
cutting off power to the entire home OR unscrew the fuse that provides power
to where the fixture will be installed.
WARRANTY
Fora period of five years from the date of purchase, in case of malfunction caused by defects in material or workmanship, the product will be repaired orreplaced at no charge to you. Return the product prepaid to Globe Electric Company Inc.. Globe reserves the right to repair or replace the product at option. Warranty begins on the date of consumer purchase. You must supply a copy of your dated cash register receipt when you request warranty service. Repair or replacemen, as described above, shall be the sole remedy of the customer and there shall be no liability on the part of Globe for any special, indirect, incidental or consequential damages, including but not limited to any loss of business or profits, whether or not foreseable. Some jurisdictions may not allow the exclusion of incidental consequential damages, so the above limitation or exclusion may not apply to you. Warranty does not apply to the bulb.
LED 3-LIGHT VANITY WITH COLOR CONTROL
integrated 25 watt LED, 1780 lumens, 90CRI, 50,000 hrs, color temperature
control (3000K-4000K-5000K)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>