trumeter 4G-LTE IOT GATEWAY ETHERNET User Guide

trumeter 4G-LTE IOT GATEWAY ETHERNET

DEVICE LIGHT SUMMARY

Name

NETWORK STATUS

| Status

2000ms off / 300ms on 300ms off / 300ms on

| 4G Gateway| Ethernet Gateway
---|---|---|---

No cable connection

OFF| No cellular network|
ON| Router is initialising| Ethernet link established

1000ms off 1000ms on

| Cellular network is initialising|

DNS error

1500ms off 100ms on 100ms off 100ms on|

SIM card error

|

200ms off 200ms on

| Getting IP from cellular

network

500ms off, 500ms on

| Cellular connection established

SEND

| OFF| No Cloud link| No Cloud link
ON| Cloud link established| Cloud link established
Flashing| Sending data| Sending data

RECEIVE

| OFF| No Cloud link| No Cloud link
ON| Cloud link established| Cloud link established
Flashing| Receiving data| Receiving data

POWER

| OFF| No power to device| No power to device
ON| Device is powered| Device is powered

DEVICE DIAGRAM

1. DC power supply: 5.5*2.5mm, 9-36V
2. Device Reset: Reset button
3. Power Supply Output: Loopback (directly connected to power supply input terminal)
4. Serial Port: RS485, 5.08mm terminal block plug-in
5. Analog Input: AI1~44 current input detection
6. Antenna: Main antenna
7. Digital Input: DI1~DI4 is 4 way dry/wet node input detection

HARDWARE CONFIGURATION

Device Wiring

1. Wire selected APM meters 4-20ma connections to router
2. Wire selected APM meters digital outputs (for alarm feature) to router
3. Configure meters to ensure alarms are set (APM configurator)
4. Plug multi adaptor into router without power
5. Check all wiring connections are correct

Powering Device

1. Power router by plugging in multi adaptor
2. Check and wait for network connection
3. Confirm Analog Input and Digital Input connection LED’s depending on how many meters are connected to router

Device Mounting

1. Attach IoT Router to wall and or cabinet
2. Connect the antenna to the router via screw terminal
3. Place antenna outside of any metal enclosure to ensure best reception

CLOUD ACCESS

To access the Trumeter Cloud dashboard, go to cloud.trumeter.com

There are two types of user account:

1. Customer User
2. Read-only User

A Customer User can create and modify parameters within the dashboard including adding and managing gateways and users. A Read Only user has access to the dashboard and can view and monitor parameters from a gateway.

Registering a Customer User Account

1. Go to cloud.trumeter.com
2. Click Sign Up to go to the registration screen
3. Once registered a confirmation email will be sent to the email address used for the account

Adding a New User

1. Go to cloud.trumeter.com
2. Login as a Customer User
3. Go to User Groups > Self Registration Users
4. Click on “+” and create new user
5. You can activate the user or send an email with activation link to the email address used for the new account. See full manual for assigning read only permissions

Adding a New Gateway

1. Go to cloud.trumeter.com
2. Open dashboard as Customer User
3. Add unique serial code and model in the “add new gateway”
4. Device will be claimed and added to the list of gateways

Editing Gateway Configuration

1. Go to cloud.trumeter.com
2. Open dashboard as Customer User
3. Click cog on the gateway you want to configure
4. Change the configuration and click save when done

ALARM SETUP

1. Set APM alarm output thresholds using APM configurator
2. Ensure wiring from APM output to Digital Input on gateway
3. When triggered, alarms will appear on the cloud dashboard assigned to the APM

SMS and Email Setup

1. Go to cloud.trumeter.com
2. Login as Customer User
3. Click on the “cog” on the gateway you want to add SMS or email
4. If you leave it blank it will not send (SMS or Email)
5. If you have made an error when editing, the dashboard will tell you that the message is not being sent
6. In the Gateway list you can see the number of texts you have left this month (Txt)
7. If there has been an error in the text and the message is not sent, the text will not be counted

Graph Visualization and Data Export

1. Go to cloud.trumeter.com
2. Open dashboard as Customer User
3. Click on “Export Widget Data” to export in either CSV, XLS or XLSX

WIRING DIAGRAM

Contacts

Trumeter (Europe)

• Trumeter, Pilot Mill, Alfred Street, Bury, Lancashire BL9 9EF, United Kingdom
• Tel: +44 161 674 0960
• Email: sales.uk@trumeter.com

Trumeter (The Americas)

• Trumeter, 6601 Lyons Rd, SUITE H-7, Coconut Creek, Florida, FL 33073, USA
• Tel: +1 954 725 6699
• Email: sales.usa@trumeter.com

Asia Pacific Distributor

• Innovative Design Technologies Sdn. Bhd, Lot 5881, Lorong Iks Bukit Minyak 1 Taman Perindustrian Iks, 14000 Bukit Tengah Penang, Malaysia
• Web: www.idtworld.com
• Tel: + 604 5015700
• Email: info@idtworld.com
• www.trumeter.com
• 033061-01 Issue 1.0 12/21

References

• IoT Gateway for APM - Trumeter
• Home - Trumeter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>