trumeter 3602 Digit Counter Top Coming Instructions
- June 16, 2024
- trumeter
Table of Contents
trumeter 3602 Digit Counter Top Coming
Product Information
Specifications
- Model: 3602 / 3603 / 3604
- Reset Method: Manual reset
- Reset Procedure: Assertive reset pushing the lever all the way to the stop in one single motion
Product Usage Instructions
Before resetting the counter, please ensure that the counter is not running and all of the wheels have stopped spinning. Follow the steps below to perform a proper reset:
- Do not use an external device to reset the counter. The reset should be done manually, by hand only.
- Do not use excessive force to reset the counter.
- Perform an assertive reset by pushing the lever all the way to the stop in one single motion.
- It is recommended to perform the reset action twice to ensure a full clean reset.
- After the reset, make sure that all of the 0’s on the display are lined up before starting your next measurement.
Frequently Asked Questions (FAQ)
-
Q: Can I use an external device to reset the counter?
A: No, it is advised to reset the counter manually, by hand only. Using an external device may cause damage to the counter. -
Q: How should I perform a proper reset?
A: Perform an assertive reset by pushing the lever all the way to the stop in one single motion. It is recommended to perform the reset action twice to ensure a full clean reset. -
Q: What should I do if the counter is still not properly reset?
A: If the counter is not properly reset, ensure that all of the wheels have stopped spinning and repeat the reset procedure. -
Q: What should I do if the display is not showing all 0’s after the reset?
A: If the display is not showing all 0’s after the reset, ensure that the reset procedure is performed correctly and repeat the reset if necessary. If the issue persists, please contact customer support for further assistance.
Model 3602 / 3603 / 3604 Reset Instructions
-
Do not reset while counter is RUNNING !
Make sure that all of the wheels have stopped spinning before resetting. -
Do not use AN EXTERNAL DEVICE to reset counter !
The reset should be done manually, by hand only. Do not use a wooden/metal pole. -
Do not use EXCESSIVE FORCE to reset counter !
Perform an assertive reset pushing the lever all the way to the stop in one single motion. It is recommended to perform the reset action twice to ensure a full clean reset.
Make sure that all of the 0’s on the display are lined up after the reset before starting your next measurement.
GOOD RESET
BAD RESET
www.trumeter.com
021284-01 Rev 02
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>