OPTONICA 6379 Desk Mount Rotary Panel RF Remote Controller Instructions

OPTONICA 6379 Desk Mount Rotary Panel RF Remote Controller

Desk Mount Rotary Panel RF Remote Controller

Features

• Apply to single color, dual color or RGB LED controller.
• Rotate knob to change RGB color, color temperature or brightness, support long press or twice click operation.
• Each remote can match one or more receiver.
• CR2032 battery powered.
• Desk mount, removeable anywhere easily.

Technical Parameters

Input and Output

Output signal| RF(2.4GHz)
Working voltage| 3VDC(CR2032)
Working current| ＜5mA
Standby current| ＜10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free  space)
Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
IP rating| IP20
Weight

Net weight| 61g
Gross weight| 118g

Mechanical Structures and Installations

Replace battery

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

• Use the controller’s Match key

  • Match:
    Short press match key, immediately push the knob. The LED indicator fast flash a few times means match is successful.

  • Delete:
    Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

• Use Power Restart

  • Match:
    Switch off the power, then switch on power, repeat again. Immediately push the knob 3 times. The light blinks 3 times means match is successful.

  • Delete:
    Switch off the power, then switch on power, repeat again. Immediately push the knob 5 times. The light blinks 5 times means all matched remotes were deleted.

Knob function

RGB remote

• Push: Turn on or off light.
• After turn on light:
  • Rotate: Rotate knob to change RGB color (3 turns, 60 colors) or brightness (2.5 turns, 50 levels).
  • Push twice: Switch between RGB color or brightness adjustment.
  • Long push(1-6s): Continuous 256 levels brightness adjustment.

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery positive and negative polarity.
   A long time without the remote control, remove the battery.
   When remote distance becomes smaller and insensitive, replace the battery.

3.  If no response from the receiver, please re-match the remote.

4.  Gently handle remote, beware of falling.

5.  For indoor and dry location use only.

IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>