PROSALT 87772 PROCORE PVC Slatwall 8-ftx4-ft White User Guide
- June 4, 2024
- PROSALT
Table of Contents
8 X 4 ft. PROCORE SLATWALL
Model # 8777
USE AND CARE GUIDE
PROCORE 8 ft. X 4 ft. SLATWALL
Questions, problems, missing parts? Before returning to the store, call Proslat Customer Service — 8 a.m. – 5 p.m., EST, Monday – Friday
1-888-691-2944
info@proslat.com
www.proslat.com
Retain this manual for future use
THANK YOU
We appreciate the trust and confidence you have placed in Proslat through the
purchase of this Slatwall. Visit us online at proslat.com to see our full line
of products available for your home storage needs. Thank you for choosing
Proslat
Safety Information
SLATWALL MUST BE INSTALLED INTO WALL STUDS
It is the responsibility of the installer to ensure that the wall mounting
surface and structure are sufficient in strength & capacity to support
Slatwall weight and its contents. Failure to observe these conditions may
result in injury or death.
- For optimum performance, Slatwall must be mounted to vertical wall studs spaced apart no more than 24 in
WARNING: Ensure that wall mounting surface and structure are sufficient
in strength & capacity to support Slatwall weight and its contents.
CAUTION: For optimum performance, PROCORE Slatwall must be mounted to
vertical wall studs no larger than 24 in
Pre-Installation
TOOLS REQUIRED
HARDWARE INCLUDED
| Part | Description | Quantity |
|---|---|---|
| AA | Torx T25 bit | 1 |
| BB | 2½ in. Torx screws | 88 |
PACKAGE CONTENTS
A
10 x 955/8 in. Proslat PROCORE panel
B
1 x 95 5/8 in. Top trim
C
2 x +/- 49in. Side J-trim
D
1 x 95 5 /8 in. Starter trim
Please contact 1 888 691-2944 for further assistance.
Installation
- Watch our installation video on proslat.com
- Location of your panel
• Decide where and how high you would like your PROCORE Slatwall section installed.
• You must start and finish on studs.
Location of your studs
- Once you have chosen your installation location, verify that you are starting and finishing on a stud.
- Using a stud finder, locate all studs between start and finish, and mark along their length with a level. You will need to screw each panel into each stud.
Install your horizontal starter trim
NOTE: For this step, it is best to have the help of a second person
- Install your starter 95 5 /8 in. trim at desired starting height (the wider side installs against the wall), level and screw into the middle studs. Do not screw into the first and last studs.
Install your vertical J-trims
- Starting on one side, overlap a side J-trim with your starter trim (the wider side installs against the wall) and screw through both (as indicated in the image).
- Level the side J-trim and drive one screw at the top to hold it in place.
- Repeat on the other side. Your panels will be screwed through the J-trims holding both in place.
Install first panel
- To install the first panel, fit the panel into the top of the tracks made by the vertical J-trims and slide all the way to the bottom.
- Make sure your panel is seated into the bottom starter trim and is level. Screw through the upper channel of the panel and into each stud. Drive screws at either end of the panel through the vertical J-trim and into your stud. This will hold your vertical J trims to the wall.
|
---|---
NOTE: Do not drive a screw through the hook channel.
| 
---|---
Installation of the following 8 panels
-
Repeat Step 6 for all remaining panels. Push down on each panel before screwing to make sure that it is properly overlapped
with the lower adjacent panel. -
Make sure you screw into every stud before installing the next panel.
-
Repeat until your last piece is left, verifying the level every three panels.
-
Properly interlocked panels will conceal the previous panel’s installation screws.
NOTE: Screws installed at the top of the vertical J-trims may have to be
removed to complete a clean installation of the top panel.
Install the last panel
- Set your last panel in place but do not screw it. Mark where to cut trims.
- Remove the panel to allow you to easily cut the trims.
- Install the last panel and screw it in.
NOTE: Screws installed at the top of the vertical J-trims may have to be removed to complete a clean installation of the top panel.
Install your top trim
- Install your horizontal top L-trim by simply clipping it into the lip above the screw cavity.
NOTE: If you have done a complete wall and you had to cut your top panel
to fit, you will need to use silicone to install your top trim.
NOTE: Vertical J-Trims are not included in the image to show the clear
installation of horizontal top L-trim.
Care and Cleaning
- Proslat PROCORE panels are very durable and water resistant. They can be washed with a power washer on a low setting or wiped with a soft cloth and mild detergents. Do not use sharp objects or abrasive cleaners.
Troubleshooting
Concrete or block wall installation
- If your walls are made of concrete or blocks, you will need to fasten 2 x 3 in. studs or furring strips vertically at 16 in. or 24 in. using cement screws and then install your panels to the studs. You will need 1.5 in self tap-in screws to screw through the aluminum insert inside the panel. If you have any issues finding them in your local hardware store please contact us.
More than one section high installation
- If you are installing more than one section vertically, it is not necessary to use a starter trim at the start of the second section.
Side-by-side installation
- If you are installing two or more sections side by side, use 2 J-trims (placing them back to back) to connect sections.
Two J-trims
- Optional: H-trim is also available on proslat.com — use this in place of back-to-back J-trims for best results.
H-trim installation (Used to join 2 sections together)
* Typically sold separately
- After deciding where you want to install your Slatwall, center your H-trim in the center of the stud at the correct height, and secure the H-trim to the stud by placing a crew at the top of the trim. Make sure the H-trim is straight and add a second screw midway down the H-trim to secure it in place. (This screw can be removed once you have completed the following step.).
Side-by-side installation using an H-trim
- Overlap one of your bottom starter trims with the bottom of your H-trim and screw through both. (number 1 on the illustration)
- Level and screw into the adjacent two studs. (number 2 on the illustration)
- Take one of your side J-trims and install it vertically by overlapping with the bottom starter trim and screwing through both. (number 3 on the illustration)
- Level the side J-trim and drive a temporary screw at the top. (This screw will be removed at the end to allow you to cut the excess trim)
- Repeat on the other side of your H-trim.
Warranty – Proslat PROCORE Slatwall
This document details the Solutions Murales Proslat inc. Warranty for all new
Proslat PROCORE Slatwall purchased anywhere in North America. This Lifetime
Warranty extends only to the first retail purchaser of the PROCORE Slatwall.
Lifetime Warranty. Solutions Murales Proslat inc. (hereafter Proslat)
warrants its PROCORE Slatwall against defects in material or workmanship for a
lifetime period. Proslat will replace any defective panel as long as it was
installed and maintained according to the printed instructions and local
building codes. Any Proslat PROCORE Slatwall replaced under the terms of the
Lifetime Warranty inherits the remaining warranty period from the original
purchase.
Exclusions. The Proslat PROCORE Warranty does not cover the following: —
Damage that results from improper installation or misuse or abuse; – Damage
due to acts of God, fire, or accident; – Damage created by non-Proslat
accessories such as hooks, baskets, cabinets, and shelving; – Damage that
results from loading accessories beyond the stated maximum weight capacity of
the Slatwall panels [225 lb. (102 kg) per square foot]; – The cost of labor or
accessory materials; and shipping cost to return defective products.
Limitations of Warranty. The above Lifetime Warranty is the exclusive
warranty for Proslat PROCORE Slatwall. Proslat disclaims all other warranties,
express or implied, including any implied warranties or merchantability,
fitness for a particular purpose, or otherwise. If you live in an area where
consumer law prohibits this disclaimer, the above Lifetime Warranty will not
extend the time period of any such implied warranty. Obtaining Lifetime
Warranty Service. For warranty service, call 1.888.691.2944. You will need
your original proof of purchase and photos to illustrate the claimed defect.
Disclaimer of liability
Solutions Murales Proslat inc. and its successors, distributors, and dealers
(hereafter SELLER) shall in no way be responsible for the product’s proper use
and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS. The BUYER
acknowledges that he/she is not relying on the SELLER’s skill or judgment to
select or furnish goods suitable for any particular purpose and that there are
no liabilities that extend beyond the description on the face hereof and the
BUYER hereby waives all remedies or liabilities, expressed or implied, arising
by law or otherwise, (including without any obligations of the SELLER with
respect to merchantability and consequential damages) or whether or not
occasioned by the SELLER’s negligence. The SELLER disclaims any warranty and
expressly disclaims any liability for personal injury or damages. The BUYER
acknowledges and agrees that the disclaimer of any liability for personal
injury is a material term for this agreement and the BUYER agrees to indemnify
the SELLER and to hold the SELLER harmless from any claim related to the item
of the equipment purchased. Under no circumstances will the SELLER be liable
for any damages or expenses by reason of use or sale of any such equipment.
The SELLER assumes no liability regarding the improper installation or
misapplication of its products. It is the installer’s responsibility to check
for proper installation and if in doubt, contact the manufacturer. These
assembly guidelines will direct you through the process of assembling a
section of Solutions Murales Proslat Inc product. Please keep in mind that
they may not cover every assembly or installation scenario you may encounter.
Since each installation is unique in its performance requirements, the
ultimate installation method used is the sole responsibility of the installer.
Proslat Inc. disclaims any liability or responsibility for the improper
installation of this product. The purchaser is solely responsible for
compliance with applicable local codes. Solutions Murales Proslat inc.
recommends that all designs be reviewed by a licensed architect, engineer, or
local building official before installation.
Questions, problems, missing parts? Before returning to the store, call
Proslat Customer Service — 8 a.m. – 5 p.m., EST, Monday – Friday
1-888-691-2944
info@proslat.com
www.proslat.com
Retain this manual for future use.
Documents / Resources
|
PROSALT 87772 PROCORE PVC Slatwall 8-ftx4-ft
White
[pdf] User Guide
87772 PROCORE PVC Slatwall 8-ftx4-ft White, 87772, PROCORE PVC Slatwall
8-ftx4-ft White, 87772 Slatwall 8-ftx4-ft White, 87772 8-ftx4-ft White
---|---
References
- Lifts, Cabinets, Racks & Flooring - Custom Storage | Proslat Garage – Proslat Canada
- Lifts, Cabinets, Racks & Flooring - Custom Storage | Proslat Garage – Proslat US
- Lifts, Cabinets, Racks & Flooring - Custom Storage | Proslat Garage – Proslat US