Eiresmart P2961 Wireless Headphone Instructions
- June 16, 2024
- Eiresmart
Table of Contents
Instructions
Specification
FCC ID :2BESH-P2961
Key Operating Instructions
- ****Long press three seconds is power on. off
- In wireless mode when get the calling. Short Press is answer the Calls:Long Press is Refuse to listen.continuous push 2 times is redial
- Playing: Short Press:Play/Pause;
M :1. Short Press to change the mode, Wireless/MP3
+ :1. In Wireless(MP3_ mode, Short Press:next; Long Press: volume+
– :1. In Wireless/MP3 mode, Short Press:Previous; Long Press: volume-
LED Indicator
- Wireless status: the blue light flashes in pairing status, and stays on after successful pairing
- MP3 status: the blue light flashes slowly during playback
- Charging status: the red light stays on when charging, and goes off after charging.
LINE Connecting TO Audio Jack
- Insert audio line,Go directly to the AUX LINE IN pattern,at this time for ordinary headset headphones, buttons
- Support mobile /MP3/CD/PC,etc
Functional Parameter
- USB charge: DCSVIN
- SNR: 88 Db
- Wireless distance: 10 meters
- Wireless frequency: 2.402-2.480GHz
- Charging time: 2 hours
- Call duration: 6 hours
- Standby time: 100 hours
Product name: Wireless Headphone
Model: P2961
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause hammful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause hamful interference to
radio or television reception, which can be determined by tuming the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
—Reorient or relocate the receiving antenna.
—increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consuit the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna(s) must not be co-
located or conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>