EMPI St199584001 Select Tens Pain System Instruction Manual
- June 1, 2024
- EMPI
Table of Contents
EMPI St199584001 Select Tens Pain System
Fixing electronic or electromechanical devices on your own, without the proper training, knowledge, or tools, can pose significant risks not just to the device itself but also to your personal safety. These devices often operate under high voltage or store energy in capacitors that can cause severe electrical shocks. Additionally, tampering with internal components can lead to short circuits, fires, or even explosions if batteries are improperly handled. The complexity of these systems means that without a thorough understanding, it’s easy to misdiagnose problems or create new issues that could render the device inoperable. Moreover, such unauthorized repairs can void warranties and violate safety regulations, leading to legal and financial repercussions. For these reasons, it’s crucial to assess the risks and consider professional services for repairs, especially for sophisticated devices where precision and safety are paramount.
This educational document is provided for informational purposes only and is not intended to serve as a comprehensive guide for conducting repairs or other technical procedures. It does not suggest that repairs should be attempted without seeking further instruction or professional advice. The information contained herein is meant to supplement, not replace, the knowledge and expertise of qualified professionals in the field. Users are advised to exercise caution and consult with experts before undertaking any actions based on the information provided in this document.
The information presented in this document is derived from sources published by the original manufacturer and may not be entirely accurate or up to date. While we have made efforts to ensure the reliability of this information, we cannot guarantee its correctness or completeness. The details provided herein should be considered as a general guide and not as a definitive source of information. Users are encouraged to verify the currentness and accuracy of the data with the respective manufacturers or other authoritative sources. We accept no liability for any errors or omissions, or for any decisions made based on the information provided in this document.
The “Acme Revival” mark and brand are registered trademarks with the United States Patent and Trademark Office (USPTO). All rights associated with this trademark, including but not limited to the use of the mark in commerce, are exclusively owned by the registrant. Unauthorized use of the “Acme Revival” trademark, or any mark that is confusingly similar, is strictly prohibited and may result in legal action for trademark infringement.
This document may contain references to trademarks belonging to other entities. The inclusion of such trademarks is purely for informational purposes and aimed at fostering knowledge and education among our users. It is not our intention to create any confusion or mislead anyone regarding the ownership of these trademarks. Our goal is to provide valuable, educational content while respecting the rights of trademark owners..
Troubleshooting
System Troubleshooting Chart
LCD Message: BATTERY LOW – CHARGE UNIT
Problem: Unable to acquire ECG or unable to print.
Correction: Charge the battery with AC power.
LCD Message: LEAD FAULT NO ECG CAPTURE
Problem : Lead fail or noisy ECG data.
Correction : Correct faulty lead or noise.
LCD Message: NO ANSWER
Problem: Unable to transmit ECG.
Correction: Check for correct phone number. Ensure modem and E-SCRIBE RX are
online.
ECG Troubleshooting Chart
Affected Leads: LEADS OFF OR ONE OR MORE OF THE FOLLOWING: RA LA LL V1 V2
V3 V4 V5 V6
Problem : Lead fail. Lead I Missing/Noisy RA/LA. Lead II Missing/Noisy
RA/LL. Lead III Missing/Noisy LA/LL. All High Freq. Noise.
Correction : Indication of RL/RA/LA/LL/V1/V2/V3/V4/V5/V6. Check limb
leads.
Correct faulty lead(s). Check patient prep; re-prep if necessary with a new
electrode.
Notch down filter from 300 Hz to 150 Hz; check proximity to power cables.
Transmission Troubleshooting Chart
LCD Messages: TRANSMIT FAILED, ERROR-DICOM Not Enabled, UNABLE TO SAVE
ECG, DHCP FAILURE, DPAC FAILURE, CAN’T CONNECT TO ACCESS POINT, CAN’T CONNECT
TO REMOTE LINK, UNABLE TO SAVE ORDER, UNABLE TO SAVE WORK ITEM, INCORRECT
RESPONSE, NO CUSTOM ID, PAPER QUEUE FAULT, CONNECTION FAILED
Problems and Corrections include:
Checking phone lines, ensuring site numbers are valid, configuring the system
for DICOM, addressing memory issues, correcting noise for ECG data storage,
and contacting technical service for DHCP and WLAN initialization failures.
Ensuring IP addresses are correct for connectivity issues, reattempting transmissions, checking share permissions on host devices, implementing hubs versus crossover cables for LAN connections, and addressing paper queue faults by adding paper and manually advancing the page.
Sample Probe Cable Replacement:
Advises on disconnecting and reconnecting the sample probe cable, emphasizing
the need for caution to avoid damage due to static electricity and improper
connections.
Secondary Cooling Fan Replacement
Offers a step-by-step guide for replacing the cooling fan, including the
removal and reinstallation of screws and connectors, and highlights the
importance of handling PCBs correctly to prevent static damage.
Solenoid Impactor Replacement:
Provides instructions on replacing the solenoid impactor, including
disassembly steps and caution regarding hazardous voltage and proper
connections to avoid damaging the instrument.
Plunger Wire Replacement:
Instructions for replacing the sampler plunger wire every 500 tests to
maintain accurate measurements, including calibration steps to ensure the
instrument’s proper functioning.
General Maintenance and Calibration:
Detailed procedures for calibration and sample handling, ensuring the
instrument delivers accurate osmolality measurements.
Warning Regarding Hazardous Voltage:
Cautions about the risk of improper connections causing damage to the
instrument or harm to the user due to hazardous voltage.
Technical Assistance:
Information on contacting Advanced Instruments Hot-Line® Service Center for
further assistance or technical support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>